Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Subject potassium ions

Cation-activated enzymes are those that require a cation for maximal activity but for which that cation is generally not a direct component of the enzyme reaction mechanism. They were originally identified by Evans and Sorger in a study of activation of enzymes by monovalent metal cations. These activating cations convert the enzyme to a form with enhanced catalytic activity. When a cation is part of the enzyme mechanism, its requirement is essential and no reaction occurs in its absence. On the other hand, if the enzyme is cation-activated, the presence of the cation merely increases the activity of the enzyme from a finite value, that is, the enzyme generally works (but not as well) in the absence of the activating cation. A simple example, to be described here, is provided by the activation of pyruvate kinase by potassium ions that bind 6-8 A from the active site of the enzyme. Reviews on aspects of the subject of cation-activated enzymes by Suelter, Woehl and Dunn," and Larsen and Reed are highly recommended. [Pg.691]

Some of the rare causes of metabolic alkalosis due to potassium depletion are those found in subjects with either Cushing s syndrome, primary aldosteronism, or Bartter s syndrome. In Cushing s syndrome, the potassium ions and alkalosis are related to increased mineralocorticoid activity resulting from an increase in adrenocorticotropic hormone (ACTH), cortisol, deoxycorticosterone, and corticosterone. In primary aldosteronism, the effects of increased aldosterone are manifest on the distal tubule of the kidney. In Bartter s syndrome, the basic abnormality appears to be a defect in the reabsorption of chloride in the ascending limb of loop of Henle, leading to loss of potassium (12). [Pg.136]

This arrangement gives valinomycin a cavity which exactly fits around the potassium ion giving valinomycin a 10 greater affinity for potassium over sodium ions (Wipf et al., 1970). These types of ionophores have unique abilities to transport metal ions across apolar membranes. The ionophoric peptides have been the subject of two reviews (Hilgenfeld and Saenger, 1982 Lindenbaum ct al., 1979). [Pg.74]

The use of an alternative protocol eventually made it possible to carry out bismetalations with all the mentioned substrates n = 0-3) under very mild conditions. This required the use of crown ether to coordinate the potassium ion and allowed switching from the previously required ether solvents to aromatic solvents such as benzene or toluene. The reaction proceeds even at room temperature and is much faster than previously observed. An additional advantage is that in almost all cases the products precipitate and can be subjected to X-ray crystallographic analysis. ... [Pg.125]

The potassium concentration profile near the surface of the samples subjected to the EF-IOX for 10 min are shown in Figure 5. In the outer surface a step in the concentration profile occurs for all conditions and the potassium penetration depth increases with the field intensity. The penetration depth is lower than that estimated by Eq. 4, according to mass balance and charge neutrality. During the process a local electric charge can be formed in the sample due to different mobility of sodium and potassium ions and, consequently, a local field is formed. Such local field can neutralize the external applied filed and prevent further exchange. [Pg.146]

Narasimhan (1999) conducted a series of one-dimensional column experiments to verify the model predictions using potassium ions as a tracer. A solution of 0.02 M KCl was used as a permeant at the upstream end subjected to a hydraulic gradient of 3.75. A lOOV/m electrical potential gradient was applied to counter the hydraulic flow on a 2-h on to 22-h off cycle for 32 days. The soil columns were sectioned and analyzed for potassium ion concentration. The symbols in Figure 26.1 present the results of the experiment with and without an electrokinetic barrier at different... [Pg.571]

A calcined silica-alumina catalyst was also subjected to ion exchange with potassium ion (Table V). For this calcined cataljrst as little as 0.04 milliequivalents of potassium ion per gram of catalyst causes a severe loss of activity. To bring about a given decrease of catal3rtie activity a... [Pg.217]

Potassium ions are exceptional in being subject both to reabsorption from and secretion by the tubules. Secretion seems to involve an ion-exchange reaction in which Na " ions are reabsorbed and H ions compete with ions. Anything that enhances H ion excretion is likely to decrease the excretion of K ions. [Pg.395]

We investigate the problem of establishing a concentration gradient, say across a membrane. This establishment requires energy, for example from ATP. In turn the gradient may be used to do work in the surroundings of the system. The subject is closely related to the issue of the efficiency of biological pumps, such as pumps for sodium ions, potassium ions, and protons. [Pg.169]

The effects of changing the proton content of solutions bathing excitable membranes has been the subject of many reports in the j)ast. (1-7). Two main effects were commonly observed although they differed quantitatively upon changing the nerve preparation a) a shift on the voltage axis of the parameters characterizing nerve excitability (similar to the action of divalent ions (8)), b) a variation of the steady-state maximum conductance of the open channels selective for sodium and potassium ions. A third type of effects concerns phenomena such as the voltage-dependent block of Na" "-channels observed by Woodhull (9) in the node of Ranvier. [Pg.16]

In view of this, the properties of / films were examined after they had been subjected to increasing amounts of ion exchange . In order to do this, detached films were exposed at 65°C for 7 h to a universal buffer adjusted to a suitable pH and the resistance of the film measured at 25°C in 3 n and O OOlN potassium chloride. The results obtained with a pentaerythritol alkyd are shown in Fig. 14.4 from which it can be seen that as the pH of the conditioning solution increased, the resistance of the film fell, until at a pH of about 7.5 it suddenly dropped. The resistance of the film then followed that of the solution in which it was immersed, i.e. it became a D-type film. Similar results were obtained with films of a tung oil phenolic varnish, although in this case the change-over point occurred at a higher pH, i.e. about 9. [Pg.601]

The reaction is a sensitive one, but is subject to a number of interferences. The solution must be free from large amounts of lead, thallium (I), copper, tin, arsenic, antimony, gold, silver, platinum, and palladium, and from elements in sufficient quantity to colour the solution, e.g. nickel. Metals giving insoluble iodides must be absent, or present in amounts not yielding a precipitate. Substances which liberate iodine from potassium iodide interfere, for example iron(III) the latter should be reduced with sulphurous acid and the excess of gas boiled off, or by a 30 per cent solution of hypophosphorous acid. Chloride ion reduces the intensity of the bismuth colour. Separation of bismuth from copper can be effected by extraction of the bismuth as dithizonate by treatment in ammoniacal potassium cyanide solution with a 0.1 per cent solution of dithizone in chloroform if lead is present, shaking of the chloroform solution of lead and bismuth dithizonates with a buffer solution of pH 3.4 results in the lead alone passing into the aqueous phase. The bismuth complex is soluble in a pentan-l-ol-ethyl acetate mixture, and this fact can be utilised for the determination in the presence of coloured ions, such as nickel, cobalt, chromium, and uranium. [Pg.684]

The interpretation of the CVF spectra of the metabolites may be attempted by using a similar methodology to that described previously, i.e. subject to the cautionary note above, looking to see which ions occur at the same m /z values in the spectra of the parent drug and its metabolites and which show significant mass variations. The CVF spectrum from one of the metabolites is shown in Figure 5.52. In addition to the potassium adducts noted in the spectrum from... [Pg.261]

When 2-methoxy-l,6-methano[10]annulene 32 was subjected to a cyclopropana-tion with diazomethane and cuprous chloride as catalyst reaction occurred preferentially at the 5,6-, 6,7- and/or 1,10-bonds and the adducts spontaneously underwent disrotatory opening yielding the corresponding methoxybicyclo[5.4.1]dodecapen-taenes. Hydride abstraction with triphenylmethyl fluoroborate was performed on the mixture and the ions 33 and 34 so produced were treated with dilute aqueous potassium hydroxide. The annulenones 13 and 14 were then separated by chromatography. [Pg.123]

In the presence of bromide ions the electrode was subject to a drop in potential, (e.g., 1.5 to 5.7 mV at a Br iCl ratio of 2000 3) and to delayed response. A considerable hysteresis effect is also observed in concentrated solutions of chloride when the electrode is used in a 1M chloride solution and then dipped in one that is 0.02 M. Equilibrium is reached only after 10 min. The junction potential is minimised by diluting the test solution with the salt-bridge solution (10% aq. potassium nitrate). [Pg.66]

The method is more sensitive than the biuret method and has an analytical range from 10 ju,g to 1.0 mg of protein. Using the method outlined below this is equivalent to sample concentrations of between 20 mg l-1 and 2.0 g l-1. The relationship between absorbance and protein concentration deviates from a straight line and a calibration curve is necessary. The method is also subject to interference from simple ions, such as potassium and magnesium, as well as by various organic compounds, such as Tris buffer and EDTA (ethylenediamine-tetraacetic acid). Phenolic compounds present in the sample will also react and this may be of particular significance in the analysis of plant extracts. [Pg.392]

Ion recognition is a subject of considerable interest because of its implications in many fields chemistry, biology, medicine (clinical biochemistry), environment, etc. In particular, selective detection of metal cations involved in biological processes (e.g., sodium, potassium, calcium, magnesium), in clinical diagnosis (e.g., lithium, potassium, aluminum) or in pollution (e.g., lead, mercury, cadmium) has received much attention. Among the various methods available for detection of ions, and more... [Pg.21]


See other pages where Subject potassium ions is mentioned: [Pg.1045]    [Pg.11]    [Pg.141]    [Pg.25]    [Pg.535]    [Pg.190]    [Pg.1045]    [Pg.449]    [Pg.449]    [Pg.345]    [Pg.13]    [Pg.283]    [Pg.143]    [Pg.146]    [Pg.37]    [Pg.49]    [Pg.717]    [Pg.1356]    [Pg.396]    [Pg.320]    [Pg.211]    [Pg.279]    [Pg.120]    [Pg.442]    [Pg.150]    [Pg.556]    [Pg.180]    [Pg.245]    [Pg.180]    [Pg.109]    [Pg.112]    [Pg.661]   
See also in sourсe #XX -- [ Pg.562 ]

See also in sourсe #XX -- [ Pg.562 ]




SEARCH



Potassium ions

Subject potassium

© 2026 chempedia.info