Strong acid number

Inorganic Acidity, Strong Acid Number or Strong Acid Value represents the ing of KOH used to neutralize the mineral acid content of 1 g of the sample. The difference of Total Acidity and Inorganic Acidity is equal to Organic Acidity. 

Determination of strong acid number or inorganic acidity of an oil... 

Discussion—This test method provides additional information. The quantity of base, expressed as milligrams of potassium hydroxide per gram of sample, required to titrate a sample in the solvent from its initial meter reading in millivolts to a meter reading in millivolts corresponding to a freshly prepared nonaqueous acidic buffer solution or a well-defined inflection point as specified in the test method shall be reported as the strong acid number. 

Procedure for Acid Number and Strong Acid Number... 

Calculate the acid number and strong acid number as follows ... 

Strong acid number (Test Method D 664) (result)... 

Precision data have not been developed for strong acid number because of its rare occurrence in sample analysis. 

Furfural is a resin former under the influence of strong acid. It will self-resinify as well as form copolymer resins with furfuryl alcohol, phenoHc compounds, or convertible resins of these. Conditions of polymerization, whether aqueous or anhydrous, inert or oxygen atmosphere, all affect the composition of the polymer. Numerous patents have issued relating to polymerization and to appHcations. Although the resins exhibit a degree of britdeness, they have many outstanding properties a number of appHcations are discussed under "Uses."... 

Fluorosulfuric acid [7789-21-17, HSO F, is a colodess-to-light yellow liquid that fumes strongly in moist air and has a sharp odor. It may be regarded as a mixed anhydride of sulfuric and hydrofluoric acids. Fluorosulfuric acid was first identified and characterized in 1892 (1). It is a strong acid and is employed as a catalyst and chemical reagent in a number of chemical processes, such as alkylation (qv), acylation, polymerization, sulfonation, isomerization, and production of organic fluorosulfates (see Friedel-CRAFTSreactions). 

Alkaline Catalysts, Resoles. Resole-type phenoHc resins are produced with a molar ratio of formaldehyde to phenol of 1.2 1 to 3.0 1. For substituted phenols, the ratio is usually 1.2 1 to 1.8 1. Common alkaline catalysts are NaOH, Ca(OH)2, and Ba(OH)2. Whereas novolak resins and strong acid catalysis result in a limited number of stmctures and properties, resoles cover a much wider spectmm. Resoles may be soHds or Hquids, water-soluble or -insoluble, alkaline or neutral, slowly curing or highly reactive. In the first step, the phenolate anion is formed by delocali2ation of the negative charge to the ortho and para positions. 

Protonic initiation is also the end result of a large number of other initiating systems. Strong acids are generated in situ by a variety of different chemistries (6). These include initiation by carbenium ions, eg, trityl or diazonium salts (151) by an electric current in the presence of a quartenary ammonium salt (152) by halonium, triaryl sulfonium, and triaryl selenonium salts with uv irradiation (153—155) by mercuric perchlorate, nitrosyl hexafluorophosphate, or nitryl hexafluorophosphate (156) and by interaction of free radicals with certain metal salts (157). Reports of "new" initiating systems are often the result of such secondary reactions. Other reports suggest standard polymerization processes with perhaps novel anions. These latter include (Tf)4Al (158) heteropoly acids, eg, tungstophosphate anion (159,160) transition-metal-based systems, eg, Pt (161) or rare earths (162) and numerous systems based on tri flic acid (158,163—166). Coordination polymerization of THF may be in a different class (167). 

Arsenic pentasulfide (arsenic(V) sulfide), As S q, is stable in air up to 95°C, but at higher temperatures begins to dissociate into arsenous sulfide and sulfur. It is prepared by the fusion of arsenic with sulfur foUowed by extraction with ammonia and reprecipitation at low temperatures by addition of hydrochloric acid. Arsenic pentasulfide is precipitated at low temperatures from strongly acidic arsenate solutions by a rapid stream of hydrogen sulfide. It is hydrolyzed by boiling with water, yielding arsenous acid and sulfur. Salts derived from a number of thioarsenic acids are formed from arsenic pentasulfide and alkaH metal sulfides. 

An extensive study of the A" -3-keto steroid system reveals a number of selective exchange reactions. For example, under controlled conditions in the presence of a strong acid catalyst such as deuterium chloride, it is... 

---