Stereoselectivity groups

For ketones and aldehydes in which adjacent substituents permit the possibility of chelation with a metal ion, the stereochemistry can often be interpreted in terms of the steric requirements of the chelated TS. In the case of a-alkoxyketones, for example, an assumption that both the alkoxy and carbonyl oxygens are coordinated with the metal ion and that addition occurs from the less hindered face of this chelate correctly predicts the stereochemistry of addition. The predicted product dominates by as much as 100 1 for several Grignard reagents.120 Further supporting the importance of chelation is the correlation between rate and stereoselectivity. Groups that facilitate chelation cause an increase in both rate and stereoselectivity.121 This indicates that chelation not only favors a specific TS geometry, but also lowers the reaction barrier by favoring metal ion complexation. 

Since its discovery more than 50 years ago, olefin metathesis has evolved from its origins in binary and ternary mixtures of the Ziegler-Natta type into a research area dominated by well-defined molecular catalysts. Surveys of developments up to 1993 were presented in COMC (1982) and COMC (1995). Major advances in ROMP over the last 10 years include the development of modular, stereoselective group 6 initiators, and easily handled, functional-group tolerant ruthenium initiators. The capacity to tailor polymer functionality, chain length, and microstructure has expanded applications in materials science, to the point where ROMP now constitutes one of the most powerful methods available for the molecular-level design of macromolecular materials. In addition to an excellent and comprehensive text on olefin metathesis, a three-volume handbook s has recently appeared, of which the third volume focuses specifically on applications of metathesis in polymer synthesis. 

Reduction of attytte derivatives (10, 385-386). A variety of allylic functional groups can be reduced by the combination of Pd[P(C6H5)]4 and this bulky hydride with good to excellent regio- and stereoselectivity. Groups that can be displaced include OR, SR, SO,R, SeR, and OSi(CH3)2C(CH3)3. ... 

The large sulfur atom is a preferred reaction site in synthetic intermediates to introduce chirality into a carbon compound. Thermal equilibrations of chiral sulfoxides are slow, and parbanions with lithium or sodium as counterions on a chiral carbon atom adjacent to a sulfoxide group maintain their chirality. The benzylic proton of chiral sulfoxides is removed stereoselectively by strong bases. The largest groups prefer the anti conformation, e.g. phenyl and oxygen in the first example, phenyl and rert-butyl in the second. Deprotonation occurs at the methylene group on the least hindered site adjacent to the unshared electron pair of the sulfur atom (R.R. Fraser, 1972 F. Montanari, 1975). 

Ketones, in which one alkyl group R is sterically demanding, only give the trans-enolate on deprotonation with LDA at —12°C (W.A. Kleschick, 1977, see p. 60f.). Ketones also enolize regioseiectively towards the less substituted carbon, and stereoselectively to the trans-enolate, if the enolates are formed by a bulky base and trapped with dialkyl boron triflates, R2BOSO2CF3, at low temperatures (D A. Evans, 1979). Both types of trans-enolates can be applied in stereoselective aldol reactions (see p. 60f.). 

Alkylation of aldol type educts, e.g., /3-hydroxy esters, using LDA and alkyl halides leads stereoselectively to erythro substitution. The erythro threo ratio of the products is of the order of 95 5. Allylic and benzylic bromides can also be used. The allyl groups can later be ozonolysed to gjve aldehydes, and many interesting oligofunctional products with two adjacent chiral centres become available from chiral aldol type educts (G. Prater, 1984 D. Seebach, 1984 see also M. Nakatsuka, 1990, p. 5586). 

If alkyl groups are attached to the ylide carbon atom, cis-olefins are formed at low temperatures with stereoselectivity up to 98Vo. Sodium bis(trimethylsilyl)amide is a recommended base for this purpose. Electron withdrawing groups at the ylide carbon atom give rise to trans-stereoselectivity. If the carbon atom is connected with a polyene, mixtures of cis- and rrans-alkenes are formed. The trans-olefin is also stereoseiectively produced when phosphonate diester a-carbanions are used, because the elimination of a phosphate ester anion is slow (W.S. Wadsworth, 1977). 

The Peterson reaction has two more advantages over the Wittig reaction 1. it is sometimes less vulnerable to sterical hindrance, and 2. groups, which are susceptible to nucleophilic substitution, are not attacked by silylated carbanions. The introduction of a methylene group into a sterically hindered ketone (R.K. Boeckman, Jr., 1973) and the syntheses of olefins with sulfur, selenium, silicon, or tin substituents (D. Seebach, 1973 B.T. Grdbel, 1974, 1977) illustrate useful applications. The reaction is, however, more limited and time consuming than the Wittig reaction, since metallated silicon derivatives are difficult to synthesize and their reactions are rarely stereoselective (T.H. Chan, 1974 ... 

The growing importance of cyclopropane derivatives (A. de Meijere, 1979), as synthetic intermediates originates in the unique, olefin-like properties of this carbocycle. Cyclopropane derivatives with one or two activating groups are easily opened (see. p. 69f.). Some of these reactions are highly regio- and stereoselective (E. Wenkert, 1970 A, B E. J. Corey, 1956 A, B, 1975 see p. 70). Many appropriately substituted cyclopropane derivatives yield 1,4-difunctional compounds under mild nucleophilic or reductive reaction conditions. Such compounds are especially useful in syntheses of cyclopentenone derivatives and of heterocycles (see also sections 1.13.3 and 4.6.4). 

Synthetically useful stereoselective reductions have been possible with cyclic carbonyl compounds of rigid conformation. Reduction of substituted cyclohexanone and cyclopentan-one rings by hydrides of moderate activity, e.g. NaBH (J.-L. Luche, 1978), leads to alcohols via hydride addition to the less hindered side of the carbonyl group. Hydrides with bulky substituents 3IQ especially useful for such regio- and stereoselective reductions, e.g. lithium hydrotri-t-butoxyaluminate (C.H. Kuo, 1968) and lithium or potassium tri-sec-butylhydro-borates or hydrotri-sec-isoamylborates (=L-, K-, LS- and KS-Selectrides ) (H.C. Brown, 1972 B C.A. Brown, 1973 S. Krishnamurthy, 1976). 

The hydrogenolyaia of cyclopropane rings (C—C bond cleavage) has been described on p, 105. In syntheses of complex molecules reductive cleavage of alcohols, epoxides, and enol ethers of 5-keto esters are the most important examples, and some selectivity rules will be given. Primary alcohols are converted into tosylates much faster than secondary alcohols. The tosylate group is substituted by hydrogen upon treatment with LiAlH (W. Zorbach, 1961). Epoxides are also easily opened by LiAlH. The hydride ion attacks the less hindered carbon atom of the epoxide (H.B. Henhest, 1956). The reduction of sterically hindered enol ethers of 9-keto esters with lithium in ammonia leads to the a,/S-unsaturated ester and subsequently to the saturated ester in reasonable yields (R.M. Coates, 1970). Tributyltin hydride reduces halides to hydrocarbons stereoselectively in a free-radical chain reaction (L.W. Menapace, 1964) and reacts only slowly with C 0 and C—C double bonds (W.T. Brady, 1970 H.G. Kuivila, 1968). 

The C—C double bond in the cyclopentene ring can be cleaved by the osmium tetroxide-periodate procedure or by photooxygenation. The methoxalyl group on C-17 can, as a typical a-dicarbonyl system, be split off with strong base and is replaced by a proton. Since this elimination occurs with retention of the most stable configuration of the cyclization equi-hbrium, the substituents at C-17 and C-18 are located trans to one another. The critical introduction of both hydrogens was thus achieved regio- and stereoselectively. 

When the 2-hydroxy group of a monosaccharide reacts with (diethylamino)sulfur trifluoride (DAST), quantitative and stereoselective rearrangements are observed (K.C Nico-laou, 1986). This reaction may simultaneously introduce fluorine to C-1 and a new oxygen, sulfur, or nitrogen residue to C-2 with inversion of configuration. 

Unique chemistry is associated with the cyclopentenone all five carbon atoms can be functionalized, and the endo-methyl groups of the acetonide assure clean stereoselective addition of the alkenylcopper reagent from the convex side. The use of the acetonide group to control enolate regioselectivity and to mask alcohols should be generally applicable. 

Several cortisone derivatives with glucocorticoid effects are most active, if they contain fluorine in the 9or-position together with an Il(9-OH group. Both substituents are introduced by the cleavage of a 9,11 -epoxide with hydrogen fluoride. The regio- and stereoselective formation of the -epoxide is achieved by bromohydrination of a 9,11-double bond and subsequent alkali treatment (J. Fried, 1954). 

In order to make these oxidative reactions of 1,3-dienes catalytic, several reoxidants are used. In general, a stoichiometric amount of benzoquinone is used. Furthermore, Fe-phthalocyanine complex or Co-salen complex is used to reoxidize hydroquinone to benzoquinone. Also, it was found that the reaction is faster and stereoselectivity is higher when (phenylsulflnyl)benzoquinone (383) is used owing to coordination of the sulfinyl group to Pd, Thus the reaction can be carried out using catalytic amounts of PdfOAcji and (arylsulfinyl)benzoquinone in the presence of the Fe or Co complex under an oxygen atmosphere[320]. Oxidative dicyanation of butadiene takes place to give l,4-dicyano-2-butene(384) (40%) and l,2-dicyano-3-butene (385)[32l]. 

The Pd-catalyzed hydrogenolysis of vinyloxiranes with formate affords homoallyl alcohols, rather than allylic alcohols regioselectively. The reaction is stereospecific and proceeds by inversion of the stereochemistry of the C—O bond[394,395]. The stereochemistry of the products is controlled by the geometry of the alkene group in vinyloxiranes. The stereoselective formation of stereoisomers of the syn hydroxy group in 630 and the ami in 632 from the ( )-epoxide 629 and the (Z)-epoxide 631 respectively is an example. 

Addition of a hydroxy group to alkynes to form enol ethers is possible with Pd(II). Enol ether formation and its hydrolysis mean the hydration of alkynes to ketones. The 5-hydroxyalkyne 249 was converted into the cyclic enol ether 250[124], Stereoselective enol ether formation was applied to the synthesis of prostacyclin[131]. Treatment of the 4-alkynol 251 with a stoichiometric amount of PdCl2, followed by hydrogenolysis with formic acid, gives the cyclic enol ether 253. Alkoxypalladation to give 252 is trans addition, because the Z E ratio of the alkene 253 was 33 1. 

The stereoselectivity of this reaction depends on how the alkene approaches the catalyst surface As the molecular model m Figure 6 3 shows one of the methyl groups on the bridge carbon lies directly over the double bond and blocks that face from easy access to the catalyst The bottom face of the double bond is more exposed and both hydrogens are transferred from the catalyst surface to that face... 

---