Solvents alkyl halides

In contrast to alkylations with most of the alkyl halides, the reactions of anions with ethylene oxide in organic solvents such as diethyl ether and THE... 

Esters are alkylated in the presence of strong bases in aprotic solvents. A common combination is LDA in tetrabydrofuran at low temperatures. Equimolar amounts of base are sufficient and only the mono-carbanion Js formed. After addition of one mole of alkyl halide the products form rapidly, and no dialkylation, which is a problem in the presence of excess base, is possible. Addition of one more mole of LDA and of another alkyl halide leads to asymmetric dialkylation of one or-carbon atom in high yield (R.J. Cregge, 1973). 

Similarly sodium methoxide (NaOCHj) is a suitable base and is used m methyl alco hoi Potassium hydroxide m ethyl alcohol is another base-solvent combination often employed m the dehydrohalogenation of alkyl halides Potassium tert butoxide [K0C(CH3)3] is the preferred base when the alkyl halide is primary it is used m either tert butyl alcohol or dimethyl sulfoxide as solvent... 

To ensure that reaction occurs m homogeneous solution solvents are chosen that dis solve both the alkyl halide and the ionic salt The alkyl halide substrates are soluble m organic solvents but the salts often are not Inorganic salts are soluble m water but alkyl... 

The Lewis base that acts as the nucleophile often is but need not always be an anion Neutral Lewis bases can also serve as nucleophiles Common examples of substitutions involving neutral nucleophiles include solvolysis reactions Solvolysis reactions are substitutions m which the nucleophile is the solvent m which the reaction is carried out 8olvolysis m water (hydrolysis) converts an alkyl halide to an alcohol... 

Energy of alkyl halide IS approximately the same m either a nonpolar or a polar solvent... 

The large rate enhancements observed for bimolecular nucleophilic substitutions m polai aprotic solvents are used to advantage m synthetic applications An example can be seen m the preparation of alkyl cyanides (mtiiles) by the reaction of sodium cyanide with alkyl halides... 

The order of halide reactivity is I > Br > Cl > F and alkyl halides are more reac tive than aryl and vinyl halides Indeed aryl and vinyl chlorides do not form Grignard reagents m diethyl ether When more vigorous reaction conditions are required tetrahy drofuran (THF) is used as the solvent... 

It IS not necessary to prepare and isolate the sodium alkanethiolate m a separate opera tion Because thiols are more acidic than water they are quantitatively converted to their alkanethiolate anions by sodium hydroxide Thus all that is normally done is to add a thiol to sodium hydroxide m a suitable solvent (water or an alcohol) followed by the alkyl halide... 

The reaction is of the 8 2 type and works best with primary and secondary alkyl halides Elimination is the only reaction observed with tertiary alkyl halides Aryl and vinyl halides do not react Dimethyl sulfoxide is the preferred solvent for this reaction but alcohols and water-alcohol mixtures have also been used... 

Direct alkylation of esters can be carried out by forming the enolate with LDA fol lowed by addition of an alkyl halide Tetrahydrofuran (THF) is the solvent most often used m these reactions... 

Organic Halides. Alkyl halides and aiyl halides, activated by election withdrawing groups (such as NO2) in the ortho or para positions, react with alkyleneamines to form mono- or disubstituted derivatives. Product distribution is controlled by reactant ratio, metal complexation or choice of solvent (16,17). Mixing methylene chloride [75-09-2J and EDA reportedly causes a mnaway reaction (18). 

Pyrroles do not react with alkyl halides in a simple fashion polyalkylated products are obtained from reaction with methyl iodide at elevated temperatures and also from the more reactive allyl and benzyl halides under milder conditions in the presence of weak bases. Alkylation of pyrrole Grignard reagents gives mainly 2-alkylated pyrroles whereas N-alkylated pyrroles are obtained by alkylation of pyrrole alkali-metal salts in ionizing solvents. 

Nylons 46, 6, 66, 610, 11 and 12 are polar crystalline materials with exceptionally good resistance to hydrocarbons. Esters, alkyl halides, and glycols have little effect. Alcohols generally have some swelling action and may in fact dissolve some copolymers (e.g. nylon 66/610/6). There are few solvents for the nylons, of which the most common are formic acid, glacial acetic acid, phenols and cresols. 

Alkyl fluorides have been prepared by reaction between elementary fluorine and the paraffins, by the addition of hydrogen fluoride to olefins, by the reaction of alkyl halides with mercurous fluoride, with mercuric fluoride, with silver fluoride, or with potassium fluoride under pressure. The procedure used is based on that of Hoffmann involving interaction at atmospheric pressure of anhydrous potassium fluoride with an alkyl halide in the presence of ethylene glycol as a solvent for the inorganic fluoride a small amount of olefin accompanies the alkyl fluoride produced and is readily removed by treatment with bromine-potassium bromide solution. Methods for the preparation of alkyl monofluorides have been reviewed. ... 

In the absence of die polyether, potassium fluoride is insoluble in benzene and unreactive toward alkyl halides. Similar enhancement of solubility and reactivity of other salts is observed in the presence of crown ethers The solubility and reactivity enhancement result because the ionic compound is dissociated to a tightly complexed cation and a naked anion. Figure 4.13 shows the tight coordination that can be achieved with a typical crown ether. The complexed cation, because it is surrounded by the nonpolar crown ether, has high solubility in the nonpolar media. To maintain electroneutrality, the anion is also transported into the solvent. The cation is shielded from interaction with the anion as a... 

Various sources of fluoride ion have been investigated, of which highly nucleophilic tetraalkylammonium fluorides ate the most effective Thuf, fluoro alkyl halides and N (fluoroalkyl)amines are efficiently synthesized by treatment of the corresponding trifluoromethanesulfonic esters with tetrabutylammonium fluoride trihydrate in aprotic solvents [5fl] (equation 34) The displacement reactions proceed quantitatively at room temperature within seconds, but tail with hydrogen fluoride-pyridine and give reasonable yields only with hydrogen fluo ride-alkylamine reagents... 

Organolithium compounds are sometimes prepared in hydrocarbon solvents such as pentane and hexane, but nonnally diethyl ether is used. It is especially important that the solvent be anhydrous. Even trace amounts of water or alcohols react with lithium to form insoluble lithium hydroxide or lithium alkoxides that coat the surface of the metal and prevent it from reacting with the alkyl halide. Furthennore, organolithium reagents are strong bases and react rapidly with even weak proton sources to fonn hydrocarbons. We shall discuss this property of organolithium reagents in Section 14.5. 

With enamines of cyclic ketones direct C alkylation occurs with allyl and propargyl as well as alkyl halides. The reaction is again sensitive to the polarity of the solvent (29). The pyrrolidine enamine of cyclohexanone on reaction with ethyl iodide in dioxane gave 25% of 2-ethylcyclohexanone on hydrolysis, while in chloroform the yield was increased to 32%. 

With secondary and tertiary alkyl halides an Ea-elimination is often observed as a side-reaction. As the alkyl halide reactant an iodide is most often employed, since alkyl iodides are more reactive than the corresponding bromides or chlorides. With phenoxides as nucleophiles a C-alkylation can take place as a competing reaction. The ratio of 0-alkylation versus C-alkylation strongly depends on the solvent used. For example reaction of benzylbromide 4 with /3-naphth-oxide 5 in yV,A-dimethylformamide (DMF) as solvent yields almost exclusively the /3-naphthyl benzylether 6, while the reaction in water as solvent leads via intermediate 7 to formation of the C-benzylated product—l-benzyl-2-naphthol 8—as the major product ... 

---