Soluble supports synthesis

Soluble supports for solution-phase combinatorial synthesis were extensively covered in Section 8.5. A recent survey of available soluble supports, with respect to their use in the soluble supported synthesis of various classes of chemicals (90), highlights the wide range of physicochemical properties (especially regarding solubility, tendency to crystallize, and solubilization power) that are embedded in different polymers and copolymers. The assessment of a sort of S AR for the composition of copol5miers versus their physicochemical properties would require the preparation of a large number of examples. Combinatorial approaches to soluble support libraries could be highly beneficial in this perspective. 

Abstract Current microwave-assisted protocols for reaction on solid-phase and soluble supports are critically reviewed. The compatibility of commercially available polymer supports with the relatively harsh conditions of microwave heating and the possibilities for reaction monitoring are discussed. Instrmnentation available for microwave-assisted solid-phase chemistry is presented. This review also summarizes the recent applications of controlled microwave heating to sohd-phase and SPOT-chemistry, as well as to synthesis on soluble polymers, fluorous phases and functional ionic liquid supports. The presented examples indicate that the combination of microwave dielectric heating with solid- or soluble-polymer supported chemistry techniques provides significant enhancements both at the level of reaction rate and ease of purification compared to conventional procedures. 

In addition to the insoluble polymers described above, soluble polymers, such as non-cross-linked PS and PEG have proven useful for synthetic applications. However, since synthesis on soluble supports is more difficult to automate, these polymers are not used as extensively as insoluble beads. Soluble polymers offer most of the advantages of both homogeneous-phase chemistry (lack of diffusion phenomena and easy monitoring) and solid-phase techniques (use of excess reagents and ease of isolation and purification of products). Separation of the functionalized matrix is achieved by either precipitation (solvent or heat), membrane filtration, or size-exclusion chromatography [98,99]. 

Soluble support-based synthetic approaches offer the advantages of both homogeneous solution-phase chemistry (high reactivity, ease of analysis) and solid-phase synthesis (large excess of reagents, simple product isolation and purification) [98,99]. As a representative example, PEG, one of the most widely used soluble polymers, has good solubility in most organic solvents (i.e., dichloromethane, acetonitrile, dimethylformamide, and toluene), but it... 

By replacing insoluble cross-linked resins with soluble polymer supports, the well-estabhshed reaction conditions of classical organic chemistry can be more readily apphed, while still fadhtating product purification. However, soluble supports suffer from the hmitation of low loading capacity. The recently introduced fluorous synthesis methodology overcomes many of the drawbacks of both the insoluble beads and the soluble polymers, but the high cost of perfluoroalkane solvents, hmitation in solvent selection, and the need for specialized reagents may hmit its apphcations. 

Miao, W. Chan, T.H. (2003) Exploration of Ionic Liquids as Soluble Supports for Organic Synthesis. Demonstration with a Suzuki Coupling Reaction. Organic Letters, 5, 5003-5005. 

W. J. Hagan Jr. et al. have reported the cyanate-supported synthesis of pyrophosphate from CaHPCL -2 H2O. Relatively low concentrations (5-20 mM) of NaOCN were required. The experiments show that the solubility of CaHPC>4 2 H2O is dependent on the pH value of the solution and the total concentration of Ca2+ NaCl, however, has only a little influence (Hagan et al., 2007). 

A method for microwave-assisted transesterifications has been described by Van-den Eynde and Rutot [73], The authors investigated the microwave-mediated deriva-tization of poly(styrene-co-allyl alcohol) as a key step in the polymer-assisted synthesis of heterocycles. Several /i-ketoesters were employed in this procedure and multigram quantities of products were obtained when neat mixtures of the reagents in open vessels were subjected to microwave irradiation utilizing a domestic micro-wave oven (Scheme 7.65). The successful derivatization of the polymer was confirmed by IR, 1H NMR, and 13C NMR spectroscopic analyses. The soluble supports... 

Wu and Sun have presented a versatile procedure for the liquid-phase synthesis of 1,2, ,4-tctrahydro-/i-carbolines [77]. After successful esterification of the MeO-PEG-OH utilized with Fmoc-protected tryptophan, one-pot cyclocondensations with various ketones and aldehydes were performed under microwave irradiation (Scheme 7.68). The desired products were released from the soluble support in good yields and high purity. The interest in this particular scaffold is due to the fact that the l,2,3,4-tetrahydro-/f-carboline pharmacophore is known to be an important structural element in several natural alkaloids, and that the template possesses multiple sites for combinatorial modifications. The microwave-assisted liquid-phase protocol furnished purer products than homogeneous protocols and product isolation/ purification was certainly simplified. 

In a recent study, the group of Buijsman presented a microwave-mediated preparation of a different N-imidazolium-based ionic analogue of the well-known AMEBA solid support (Scheme 7.93). With this soluble support, a set of various sulfonamides and amides was prepared, and furthermore the use of this novel linker in the synthesis of a potent analogue of the antiplatelet drug tirofiban was presented [106]. 

This cycloaddition has found application in the combinatorial synthesis of indolizines on solid support <1999TL8741 2005BML453> and on soluble support as poly(ethyleneglycol) <2004SL1231>. 

Many other linkers besides those listed above have been developed for two-phase synthesis of oligosaccharides on insoluble supports, and it can be expected that at least some of them will be tested on soluble supports. It should be kept in mind that MPEG-supported syntheses can be easily scaled up therefore, any relationship between both types of polymer supports will be cooperative rather than mutually exclusive. Such linkers will most probably include dialkyl- or diaryl-silyl linkers,10,41 3 and linkers cleavable by photolysis such as the o-nitrobenzyl group and its modifications.44 16... 

A stochiometric approach was applied by Van Koten and co-workers [29], who used chiral carbosilane dendrimers as soluble supports in the in situ ester enolate-imine condensation in the synthesis of /Mactams (e.g. 19, Scheme 20). The formation of the /Mactam products proceeded with high trans selectivity, and with the same level of stereoinduction as was earlier established in reactions without the dendritic supports, (i.e. the use of the enantiopure dendritic support did not affect the enantioselectivity of the C-C bond formation). After the reaction, the dendrimer species could be separated from the product by precipitation or GPC techniques and reused again. 

Initially, the term Hquid-phase synthesis was used to contrast the differences between soHd-phase peptide synthesis and a method of synthesis on soluble polyethylene glycol (PEG) [5, 6]. Although soluble polymer-supported synthesis is less ambiguous than Hquid-phase synthesis, the latter term is more prevalent in the Hterature. In-keeping with previous reviews [7-12], the phrases classical or solution synthesis will be used to describe homogeneous reaction schemes that do not employ polymer supports while liquid-phase synthesis will be reserved... 

Traditionally, soluble polymers have received less attention as polymeric supports than their insoluble counterparts. A perceived problem with the use of soluble polymers rested in the ability to isolate the polymer from all other reaction components. Yet, in practice this separation is not difficult and several methods have capitalized on the macromolecular properties of the soluble support to achieve product separation in liquid-phase synthesis. Most frequently the homogeneous... 

More recently, the scope of using hyperbranched polymers as soluble supports in catalysis has been extended by the synthesis of amphiphilic star polymers bearing a hyperbranched core and amphiphilic diblock graft arms. This approach is based on previous work, where the authors reported the synthesis of a hyperbranched macroinitiator and its successful application in a cationic grafting-from reaction of 2-methyl-2-oxazoline to obtain water-soluble, amphiphilic star polymers [73]. Based on this approach, Nuyken et al. prepared catalyticaUy active star polymers where the transition metal catalysts are located at the core-shell interface. The synthesis is outlined in Scheme 6.10. 

In 1996, Kim and coworkers reported for the first time on the use of a polyami-doamine (PAMAM) dendrimer [Gl] as a soluble support for organic synthesis (Fig. 7.5) [37]. Advantages of PAMAM are its commercial availability and its high symmetry, which provides uniform site accessibility (in lower generations) and facilitates NMR interpretation. By attaching 4-hydroxymethylbenzoic acid (HMB) to... 

Scheme 7.4 Disaccharide synthesis using a hyperbranched polymer (Boltorn polymer) as a soluble support.

---