Solubility aldehydes and ketones

Method 2. Dissolve 0-25 g. of 2 4-dinitrophenylhydrazine in a mixture of 42 ml. of concentrated hydrochloric acid and 50 ml. of water by warming on a water bath dilute the cold solution to 250 ml. with distilled water. This reagent is more suitable for water-soluble aldehydes and ketones since alcohol is absent. 

Aldehydes and ketones are usually hydrogenated to the alcohol over platinum, rhodium or ruthenium catalysts at 25 -60°C and 1-5 atmospheres pressure. Platinum catalyzed hydrogenations are generally best run in acidic media while with rhodium or ruthenium neutral or basic solvents are preferred. Hydrogenations run over ruthenium catalysts are facilitated by the presence of water which makes ruthenium a particularly effective catalyst for the hydrogenation of sugars and other water soluble aldehydes and ketones.2... 

A. Water-soluble Aldehydes and Ketones.—Prepare some phenylhydrazine solution by dissolving 1 cc. of h quid phenyl-hydrazine in 3 cc. of 30 per cent acetic acid. Add cc. of this... 

Girard s reagents Quaternary ammonium salts of the type Me3NCH2CONHNH2 X which form water-soluble compounds with aldehydes and ketones, and are therefore separable from other neutral compounds the aldehyde or ketone may be subsequently regenerated after separation. 

Aldehydes and ketones may frequently be identified by their semicarbazones, obtained by direct condensation with semicarbazide (or amino-urea), NH,NHCONH a compound which is a monacidic base and usually available as its monohydrochloride, NHjCONHNH, HCl. Semicarbazones are particularly useful for identification of con jounds (such as acetophenone) of which the oxime is too soluble to be readily isolated and the phenylhydrazone is unstable moreover, the high nitrogen content of semicarbazones enables very small quantities to be accurately analysed and so identified. The general conditions for the formation of semicarbazones are very similar to those for oximes and phenylhydrazones (pp. 93, 229) the free base must of course be liberated from its salts by the addition of sodium acetate. 

Reagent A is particularly useful for the treatment of the lower aliphatic aldehydes and ketones which are soluble in water cf. acetaldehyde, p. 342 acetone, p. 346). The Recent is a very dilute solution of the dinitrophenylhydrazine, and therefore is used more to detect the presence of a carbonyl group in a compound than to isolate sufficient of the hydrazone for effective recrystallisation and melting-point determination. 

Dinitrophenylhydra2ones usually separate in well-formed crystals. These can be filtered at the pump, washed with a diluted sample of the acid in the reagent used, then with water, and then (when the solubility allows) with a small quantity of ethanol the dried specimen is then usually pure. It should, however, be recrystallised from a suitable solvent, a process which can usually be carried out with the dinitrophenylhydrazones of the simpler aldehydes and ketones. Many other hydrazones have a very low solubility in most solvents, and a recrystallisation which involves prolonged boiling with a large volume of solvent may be accompanied by partial decomposition, and with the ultimate deposition of a sample less pure than the above washed, dried and unrecrystal-lised sample. 

Both aldehydes and ketones contain the carbonyl group, hence a general test for carbonyl compounds will Immediately characterise both classes of compounds. The preferred reagent is 2 4-dinilrophenylhydrazine, which gives sparingly soluble phenylhydrazones with carbonyl compounds ... 

The polyhydric alcohols of Solubility Group II are liquids of relatively high boiling point and may be detected inter alia by the reactions already described for Alcohols (see 6). Compounds containing two hydroxyl groups attached to adjacent carbon atoms (1 2-glyeols), a-hydroxy aldehydes and ketones, and 1 2-diketones may be identified by the periodic acid test, given in reaction 9. 

The imides, primaiy and secondary nitro compounds, oximes and sulphon amides of Solubility Group III are weakly acidic nitrogen compounds they cannot be titrated satisfactorily with a standard alkaU nor do they exhibit the reactions characteristic of phenols. The neutral nitrogen compounds of Solubility Group VII include tertiary nitro compounds amides (simple and substituted) derivatives of aldehydes and ketones (hydrazones, semlcarb-azones, ete.) nitriles nitroso, azo, hydrazo and other Intermediate reduction products of aromatic nitro compounds. All the above nitrogen compounds, and also the sulphonamides of Solubility Group VII, respond, with few exceptions, to the same classification reactions (reduction and hydrolysis) and hence will be considered together. 

Physical constants such as melting point boiling point and solubility in water are collected for a variety of aldehydes and ketones in Appendix 1... 

The carbonyl oxygen of aldehydes and ketones can form hydrogen bonds with the pro tons of OH groups This makes them more soluble m water than alkenes but less solu ble than alcohols... 

The reaction has been extended to include carbanions generated from phosphonates. This is often referred to as the Horner-Wittig or Homer-Emmons reaction. The Horner-Emmons reaction has a number of advantages over the conventional Wittig reaction. It occurs with a wider variety of aldehydes and ketones under relatively mild conditions as a result of the higher nucleophilicity of the phosphonate carbanions. The separation of the olefinic product is easier due to the aqueous solubility of the phosphate by-product, and the phosphonates are readily available from the Arbusov reaction. Furthermore, although the reaction itself is not stereospecific, the majority favor the formation of the trans olefin and many produce the trans isomer as the sole product. 

Addition of sodium dithionite to formaldehyde yields the sodium salt of hydroxymethanesulfinic acid [79-25-4] H0CH2S02Na, which retains the useful reducing character of the sodium dithionite although somewhat attenuated in reactivity. The most important organic chemistry of sodium dithionite involves its use in reducing dyes, eg, anthraquinone vat dyes, sulfur dyes, and indigo, to their soluble leuco forms (see Dyes, anthraquinone). Dithionite can reduce various chromophores that are not reduced by sulfite. Dithionite can be used for the reduction of aldehydes and ketones to alcohols (348). Quantitative studies have been made of the reduction potential of dithionite as a function of pH and the concentration of other salts (349,350). 

Styrene is a colourless mobile liquid with a pleasant smell when pure but with a disagreeable odour due to traces of aldehydes and ketones if allowed to oxidise by exposure to air. It is a solvent for polystyrene and many synthetic rubbers, including SBR, but has only a very limited mutual solubility in water. Table 16.1 shows some of the principal properties of pure styrene. 

Aldehydes and Ketones — These share many chemical properties because they possess the carbonyl (C=0) group as a common feature of their structure. Aldehydes and ketones have lower boiling points and higher vapor pressures than their alcohol counterparts. Aldehydes and ketones through C< are soluble in water and have pronounced odors. Ketones are relatively inert while aldehydes are easily oxidized to their counterpart organic acids. 

The aldehyde and ketone compounds formed with the sodium sulphite are readily soluble in water, and H. E. Burgess makes use of this fact... 

Lithium aluminum hydride, LiAIH4/ is another reducing agent often used for reduction of aldehydes and ketones. A grayish powder that is soluble in ether and tetrabydrofuran, LiAlH4 is much more reactive than NaBH4 but also more dangerous. It reacts violently with water and decomposes explosively when heated above 120 °C. 

Dipyridiue-chromium(VI) oxide2 was introduced as an oxidant for the conversion of acid-sensitive alcohols to carbonyl compounds by Poos, Arth, Beyler, and Sarett.3 The complex, dispersed in pyridine, smoothly converts secondary alcohols to ketones, but oxidations of primary alcohols to aldehydes are capricious.4 In 1968, Collins, Hess, and Frank found that anhydrous dipyridine-chromium(VI) oxide is moderately soluble in chlorinated hydrocarbons and chose dichloro-methane as the solvent.5 By this modification, primary and secondary alcohols were oxidized to aldehydes and ketones in yields of 87-98%. Subsequently Dauben, Lorber, and Fullerton showed that dichloro-methane solutions of the complex are also useful for accomplishing allylic oxidations.6... 

Precursor and derived lipids These include fatty acids, glycerol, steroids, other alcohols, fatty aldehydes, and ketone bodies (Chapter 22), hydrocarbons, hpid-soluble vitamins, and hormones. 

It is convenient to consider the indifferent or neutral oxygen derivatives of the hydrocarbons—(a) aldehydes and ketones, (b) esters and anhydrides, (c) alcohols and ethers— together. All of these, with the exception of the water-soluble members of low molecular weight, are soluble only in concentrated sulphuric acid, t.e., fall into Solubility Group V. The above classes of compounds must be tested for in the order in which they are listed, otherwise erroneous conclusions may be drawn from the reactions for functional groups about to be described. 

Besides direct reduction, a one-pot reductive amination of aldehydes and ketones with a-picoline-borane in methanol, in water, and in neat conditions gives the corresponding amine products (Scheme 8.2).40 The synthesis of primary amines can be performed via the reductive amination of the corresponding carbonyl compounds with aqueous ammonia with soluble Rh-catalyst (Eq. 8.17).41 Up to an 86% yield and a 97% selectivity for benzylamines were obtained for the reaction of various benzaldehydes. The use of a bimetallic catalyst based on Rh/Ir is preferable for aliphatic aldehydes. 

While ether is the common solvent for LiAlH4, in which it is soluble, hydroxylic solvents like water, methanol and ethanol are preferred for NaBH4, It is more soluble in methanol than in ethanol, but since it reacts with the former at an appreciable rate than the latter, hence ethanol is the preferred solvent. Isopropanol, in which NaBH4 is stable, is used for kinetic studies of the reduction of aldehydes and ketones. 

Solubility in water Aldehydes and ketones with low molecular masses are very soluble in water. Aldehydes and ketones with a large non-polar hydrocarbon part are less soluble in water. 

---