Silver temperature

Above 962°C, the freezing point of silver, temperatures on the ITS-90 ate defined by a thermodynamic function and an interpolation instmment is not specified. The interpolation instmment universally used is an optical pyrometer, manual or automatic, which is itself a thermodynamic device. 

Keywords silver, temperature, electrochemical impedance, thermoelectrochemistry, electrode-position, adsorption... 

Flarfenist S A and Wang Z L 1999 Fligh-temperature stability of passivated silver nanocrystal superlattices J. Phys. Chem. B 103 4342... 

The more noble metals (for example copper, mercury and silver) can form oxides, and exhibit variable oxidation state in such compounds (for example CU2O, CuO), but it is not easy to prepare such oxides by direct action of oxygen on the metal, and elevated temperatures are necessary. Moreover, in the case of silver and mercury, loss of oxygen from the oxide by heating is easy. The oxidesare, however, basic (for example Ag20 - Ag, CuO - Cu in acids). 

Three crystalline compounds, one violet, one pale green, and one deep green in colour, all have the molecular formula CrClj. 6H2O. When equal masses of the three compounds are separately treated with an excess of aqueous silver nitrate at room temperature, the masses of white precipitate produced are in the ratio 3 2 1. Suggest an explanation for these results. 

In a 1-litre three-necked flask, fitted with a mechanical stirrer, reflux condenser and a thermometer, place 200 g. of iodoform and half of a sodium arsenite solution, prepared from 54-5 g. of A.R. arsenious oxide, 107 g. of A.R. sodium hydroxide and 520 ml. of water. Start the stirrer and heat the flask until the thermometer reads 60-65° maintain the mixture at this temperature during the whole reaction (1). Run in the remainder of the sodium arsenite solution during the course of 15 minutes, and keep the reaction mixture at 60-65° for 1 hour in order to complete the reaction. AUow to cool to about 40-45° (2) and filter with suction from the small amount of solid impurities. Separate the lower layer from the filtrate, dry it with anhydrous calcium chloride, and distil the crude methylene iodide (131 g. this crude product is satisfactory for most purposes) under diminished pressure. Practically all passes over as a light straw-coloured (sometimes brown) liquid at 80°/25 mm. it melts at 6°. Some of the colour may be removed by shaking with silver powder. The small dark residue in the flask solidifies on cooling. 

Aromatic aldehydes react with the dimedone reagent (Section 111,70,2). All aromatic aldehydes (i) reduce ammoniacal silver nitrate solution and (ii) restore the colour of SchifiF s reagent many react with sodium bisulphite solution. They do not, in general, reduce Fehling s solution or Benedict s solution. Unlike aliphatic aldehydes, they usually undergo the Cannizzaro reaction (see Section IV,123) under the influence of sodium hydroxide solution. For full experimental details of the above tests, see under Ali-phalic Aldehydes, Section 111,70. They are easily oxidised by dilute alkaline permanganate solution at the ordinary temperature after removal of the manganese dioxide by sulphur dioxide or by sodium bisulphite, the acid can be obtained by acidification of the solution. 

Introduce a solution of 15 g. of the diazo ketone in 100 ml. of dioxan dropwise and with stirring into a mixture of 2 g. of silver oxide (1), 3 g. of sodium thiosulphate and 5 g. of anhydrous sodium carbonate in 200 ml. of water at 50-60°. When the addition is complete, continue the stirring for 1 hour and raise the temperature of the mixture gradually to 90-100°. Cool the reaction mixture, dilute with water and acidify with dilute nitric acid. Filter off the a-naphthylacetic acid which separates and recrys-talhse it from water. The yield is 12 g., m.p. 130°. 

Sodium anthraquinone-p-sulphonate ( silver salt ). Place 60 g. of fuming sulphuric acid (40-50 per cent. SO3) in a 250 or 500 ml. round-bottomed flask and add 50 g. of dry, finely-powdered anthra-quinone (Section IV,145). Fit an air condenser to the flask and heat the mixture slowly in an oil bath, with occasional shaking, so that at the end of 1 hour the temperature has reached 160°. Allow to cool and pour the warm mixture carefully into a 2 litre beaker containing 500 g. of crushed ice. Boil for about 15 minutes and filter off the unchanged anthraquinone at the pump. Neutralise the hot filtrate with sodium hydroxide and allow to cool, when the greater part of the sodium anthra-quinone-p-sulphonate separates as silvery glistening plates ( silver salt ). Filter these with suction and dry upon filter paper or upon a porous plate. A second crop of crystals may be isolated by concentration of the trate to half the original volume. The yield is 40-45 g. 

Reaction with alcoholic silver nitrate. To carry out the test, treat 2 ml. of a 2 per cent, solution of silver nitrate in alcohol with 1 or 2 drops (or 0 05 g.) of the compound. If no appreciable precipitate appears at the laboratory temperature, heat on a boiling water bath for several minutes. Some organic acids give insoluble silver salts, hence it is advisable to add 1 drop of dilute (5 per cent.) nitric acid at the conclusion of the test most silver salts of organic acids are soluble in nitric acid. 

Yttrium has a silver-metallic luster and is relatively stable in air. Turnings of the metal, however, ignite in air if their temperature exceeds 400oC. Finely divided yttrium is very unstable in air. 

Samarium has a bright silver luster and is reasonably stable in air. Three crystal modifications of the metal exist, with transformations at 734 and 922oC. The metal ignites in air at about ISOoC. The sulfide has excellent high-temperature stability and good thermoelectric efficiencies up to llOOoC. 

Terbium is reasonably stable in air. It is a silver-gray metal, and is malleable, ductile, and soft enough to be cut with a knife. Two crystal modifications exist, with a transformation temperature of 1289oC. Twenty one isotopes with atomic masses ranging from 145 to 165 are recognized. The oxide is a chocolate or dark maroon color. 

The element has a metallic, bright silver luster. It is relatively stable in air at room temperature, and is readily attacked and dissolved, with the evolution of hydrogen, but dilute and concentrated mineral acids. The metal is soft enough to be cut with a knife and can be machined without sparking if overheating is avoided. Small amounts of impurities can greatly affect its physical properties. 

Pure holmium has a metallic to bright silver luster. It is relatively soft and malleable, and is stable in dry air at room temperature, but rapidly oxidizes in moist air and at elevated temperatures. The metal has unusual magnetic properties. Few uses have yet been found for the element. The element, as with other rare earths, seems to have a low acute toxic rating. 

The benzyl group has been widely used for the protection of hydroxyl functions in carbohydrate and nucleotide chemistry (C.M. McCloskey, 1957 C.B. Reese, 1965 B.E. Griffin, 1966). A common benzylation procedure involves heating with neat benzyl chloride and strong bases. A milder procedure is the reaction in DMF solution at room temperatiue with the aid of silver oxide (E. Reinefeld, 1971). Benzyl ethers are not affected by hydroxides and are stable towards oxidants (e.g. periodate, lead tetraacetate), LiAIH, amd weak acids. They are, however, readily cleaved in neutral solution at room temperature by palladium-catalyzed bydrogenolysis (S. Tejima, 1963) or by sodium in liquid ammonia or alcohols (E.J. Rcist, 1964). 

Many low molecular weight aldehydes and ketones are important industrial chem icals Formaldehyde a starting material for a number of plastics is prepared by oxida tion of methanol over a silver or iron oxide/molybdenum oxide catalyst at elevated temperature... 

The equilibrium is more favorable to acetone at higher temperatures. At 325°C 97% conversion is theoretically possible. The kinetics of the reaction has been studied (23). A large number of catalysts have been investigated, including copper, silver, platinum, and palladium metals, as well as sulfides of transition metals of groups 4, 5, and 6 of the periodic table. These catalysts are made with inert supports and are used at 400—600°C (24). Lower temperature reactions (315—482°C) have been successhiUy conducted using 2inc oxide-zirconium oxide combinations (25), and combinations of copper-chromium oxide and of copper and silicon dioxide (26). 

Dry chlorine reacts with most metals combustively depending on temperature alurninum, arsenic, gold, mercury, selenium, teUerium, and tin react with dry CI2 in gaseous or Hquid form at ordinary temperatures carbon steel ignites at about 250°C depending on the physical shape and titanium reacts violendy with dry chlorine. Wet chlorine is very reactive because of the hydrochloric acid and hypochlorous acid (see eq. 37). Metals stable to wet chlorine include platinum, silver, tantalum, and titanium. Tantalum is the most stable to both dry and wet chlorine. 

The pure acid does not react in the cold with sulfur, selenium, tellurium, carbon, silver, copper, zinc, iron, chromium, or manganese, but slowly dissolves mercury and tin (20). At higher temperatures, lead, mercury, tin, and sulfur react rapidly, eg ... 

---