Silver characteristics

Note cautiously the characteristic odour of acetaldehyde which this solution possesses. Then with the solution carry out the following general tests for aldehydes described on p. 341 Test No. I (SchiflF s reagent). No. 3 (Action of sodium hydroxide). No. 4 (Reduction of ammoniacal silver nitrate). Finally perform the two special tests for acetaldehyde given on p. 344 (Nitroprusside test and the Iodoform reaction). 

The Stedman-type column is shown in Fig. 11, 56, 25. The characteristic features are (i) the use of a fine stainless steel wire cloth formed into conical discs, and (ii) an accurately fitting Pyrex glass jacket, produced by shrinking Pyrex glass on mandrels to the required inside dimensions. Modifications incorporating a silvered vacuum jacket and an electrically-heated jacket are marketed. This column is said to possess high efficiency but is expensive. It is generally employed in conjunction with a total-condensation variable take-off still head. 

Sulphur, as sulphide ion, is detected by precipitation as black lead sulphide with lead acetate solution and acetic acid or with sodium plumbite solution (an alkaLine solution of lead acetate). Halogens are detected as the characteristic silver halides by the addition of silver nitrate solution and dilute nitric acid the interfering influence of sulphide and cyanide ions in the latter tests are discussed under the individual elements. 

Anhydrous silver hexafluorophosphate [26042-63-7] AgPF, as well as other silver fluorosalts, is unusual in that it is soluble in ben2ene, toluene, and xylene and forms 1 2 molecular crystalline complexes with these solvents (91). Olefins form complexes with AgPF and this characteristic has been used in the separation of olefins from paraffins (92). AgPF also is used as a catalyst. Lithium hexafluorophosphate [21324-40-3] LiPF, as well as KPF and other PF g salts, is used as electrolytes in lithium anode batteries (qv). 

A third group includes silver—nickel, silver—cadmium oxide, and silver—graphite combinations. These materials are characterized by low contact resistance, some resistance to arc erosion, and excellent non sticking characteristics. They can be considered intermediate in overall properties between silver alloys and silver or copper—refractory compositions. Silver—cadmium oxide compositions, the most popular of this class, have wide appHcation in aircraft relays, motor controllers, and line starters and controls. 

For many electronic and electrical appHcations, electrically conductive resias are required. Most polymeric resias exhibit high levels of electrical resistivity. Conductivity can be improved, however, by the judicious use of fillers eg, in epoxy, silver (in either flake or powdered form) is used as a filler. Sometimes other fillers such as copper are also used, but result in reduced efficiency. The popularity of silver is due to the absence of the oxide layer formation, which imparts electrical insulating characteristics. Consequently, metallic fibers such as aluminum are rarely considered for this appHcation. 

Some properties of silver are summarized in Table 1. The solar energy transmittance and neutron-absorption characteristics of silver are shown in Eigures 1 and 2, respectively. Thermal properties are given in Table 2. Other properties are given in References 1,3, and 4. 

Solders. In spite of the wide use and development of solders for millennia, as of the mid-1990s most principal solders are lead- or tin-based alloys to which a small amount of silver, zinc, antimony, bismuth, and indium or a combination thereof are added. The principal criterion for choosing a certain solder is its melting characteristics, ie, soHdus and Hquidus temperatures and the temperature spread or pasty range between them. Other criteria are mechanical properties such as strength and creep resistance, physical properties such as electrical and thermal conductivity, and corrosion resistance. 

Elemental sulfur in either its ore or its refined state can generaUy be recognized by its characteristic yeUow color or by the generation of sulfur dioxide when it is burned in air. Its presence in an elemental state or in a compound can be detected by heating the material with sodium carbonate and mbbing the fused product on a wet piece of silver metal. A black discoloration of the silver indicates the presence of sulfur. The test is quite sensitive. Several other methods for detecting smaU amounts of elemental sulfur have also been developed (34). 

Electrodes. AH of the finished silver electrodes have certain common characteristics the grids or substrates used in the electrodes are exclusively made of silver, although in some particular cases silver-plated copper is used. Material can be in the form of expanded silver sheet, silver wire mesh, or perforated silver sheet. In any case, the intent is to provide electronic contact of the external circuit of the battery or cell and the active material of the positive plate. Silver is necessary to avoid any possible oxidation at this junction and the increased resistance that would result. 

Silver—Iron Cells. The silver—iron battery system combines the advantages of the high rate capabiUty of the silver electrode and the cycling characteristics of the iron electrode. Commercial development has been undertaken (70) to solve problems associated with deep cycling of high power batteries for ocean systems operations. 

Fig. 13. Charge—discharge characteristics of a nominal 140-A-h silver—iron cell where the charge (-) is at 25 A for 8 h, A represents a 0.25 A float...

Fig. 24. Silver—hydrogen cell discharge characteristics where ( ) represents a 0.5 h rate at 4 A or 80 mA/cm (—...

---