Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Silanes trimethoxy silane

ALKANOLAMNES - ALKANOLAMINES FROM OLEFIN OXIDES AND AL ONIA] (Vol 2) (3-(2-Aminoethyl)aminopropyl)trimethoxy silane... [Pg.43]

The observation of the spectrum for styrene polymerized on the surface of silane-treated silica and of the difference spectrum of polystyrene adsorbed on the surface of silica have revealed that there are absorption bands of atactic polystyrene at 1602, 1493, 1453, 756, and 698 cm. The absorption bands at 1411 and 1010 cm are related to vinyl trimethoxy silane, and C of the difference spectrum is below the base line. This indicates that the vinyl groups of silane react with styrene to form a copolymer. [Pg.827]

Figure 17 Raman spectra of a glass fiber/matrix interfaces. (A) styrene monomer (B) untreated E-glass fiber coated with polystyrene, (C) E-glass fiber treated with y-methacryloxy propyl trimethoxy silane. Figure 17 Raman spectra of a glass fiber/matrix interfaces. (A) styrene monomer (B) untreated E-glass fiber coated with polystyrene, (C) E-glass fiber treated with y-methacryloxy propyl trimethoxy silane.
Alkohole erhalt man ferner mit Natrium-triathoxy-hydrido-aluminat6, Natrium-bis-[2-methoxy-athoxy]-dihydrido-aluminat7, Lithium-trimethoxy-hydrido-aluminat8, Alu-miniumhydrid9, Diboran10, Natriumboranat/Zinn(IV)-chlorid11 bzw, Triathyl-silan/Tri-fluoressigsaure12 ... [Pg.174]

Zhong X, Yuan R, Chai Y, Liu Y, Dai J, Tang D (2005) Glucose biosensor based on self-assembled gold nanoparticles and double-layer 2d-network (3-mercaptopropyl)-trimethoxy-silane polymer onto gold substrate. Sensor Actuator B 104 191-198... [Pg.166]

SBDC N,N-(diethylamino)dithiocarbamoylbenzyl(trimethoxy)silane SFM scanning force microscopy... [Pg.48]

A stock solution of the coupling agent was prepared by mixing the trimethoxy-silane with 10 1 acetone-water solutions. The stock solution concentrations were 2-3 g/100 ml for APMS and AAPS. The solution pH was not adjusted and the experiments were done at ambient temperature (21°C). From our kinetics studies we were convinced that the hydrolysis was completed under these... [Pg.184]

Reduction The asymmetric reduction of a series of aryl alkyl ketones with quaternary ammonium fluorides and silanes was reported by Drew and Lawrence [55]. In these reactions, the best catalysts (e.g., 6f) were from the qui ni ne/quinidine series in fact, a fluoride salt prepared from cinchonine gave no induction. The use of trimethoxysilane resulted in faster rates but lower enantioselectivites when compared with tris(trimethoxy)silane. It is interesting that, with the... [Pg.744]

In PE/aluminium laminates, which are used for packaging, the bond strength can be improved by surface oxidation of the polymer. An alternative to surface oxidation is to use copolymers of ethylene and monomers containing polar groups that can provide stronger bonds to metal thus increasing adhesion [24,25]. The effects of three functional groups in ethylene copolymers, namely EVS [polyethylene-co-vinyl trimethoxy silane], EBA [polyethylene-co-butyl acrylate], EAA [polyethylene-co-acrylic acid) on the adhesion was studied [25]. The interface in polymer/metal laminates has been analysed by FT-IR... [Pg.178]

Adsorbed films of ethykriethoxysilane and vinyltriethoxy-silane were formed on silica and alumina by retraction from hydrocarbon solution and their wettabilities and water-stabilities determined. The vinyltriethoxysilane films were generally more oleophobic, more hydrophobic and more resistant to contact with water than the films formed by the ethyl analog. Neither adsorbate formed stable films on a-alumina. The addition of low molecular weight organic acids or bases to the adsorbate solution resulted in both the ethyl and vinyl compound forming hydrophobic and water-stable films on silica and ot-alumina. Films of p-chloro-phenyl-ft-ethyltrichloro, -trimethoxy, and -triethoxysilane were also studied and found to be water-stable and to have wettabilities characteristic of a surface comprised of closely-spaced p-chlorophenyl groups. [Pg.46]

Fig. 6 Immobilized functional nucleic acids, a Example fabrication of an aptamer biosen- sor surface (i) Attachment of (glycidoxypropyl)trimethoxy silane (GOPS) to glass surface at low pH results in the formation and subsequent cleavage of an epoxide, (ii) The resultant diol is activated with 1,1-carbonyldiimidazole (CDI) to form a carbonylimidazole. Fig. 6 Immobilized functional nucleic acids, a Example fabrication of an aptamer biosen- sor surface (i) Attachment of (glycidoxypropyl)trimethoxy silane (GOPS) to glass surface at low pH results in the formation and subsequent cleavage of an epoxide, (ii) The resultant diol is activated with 1,1-carbonyldiimidazole (CDI) to form a carbonylimidazole.

See other pages where Silanes trimethoxy silane is mentioned: [Pg.618]    [Pg.144]    [Pg.43]    [Pg.203]    [Pg.448]    [Pg.604]    [Pg.630]    [Pg.1020]    [Pg.351]    [Pg.33]    [Pg.101]    [Pg.351]    [Pg.45]    [Pg.272]    [Pg.568]    [Pg.575]    [Pg.618]    [Pg.333]    [Pg.677]    [Pg.407]    [Pg.94]    [Pg.262]    [Pg.43]    [Pg.43]    [Pg.203]    [Pg.448]    [Pg.604]    [Pg.630]    [Pg.96]    [Pg.473]    [Pg.95]    [Pg.380]    [Pg.53]    [Pg.541]    [Pg.93]    [Pg.600]    [Pg.24]    [Pg.136]    [Pg.14]    [Pg.55]   
See also in sourсe #XX -- [ Pg.541 ]




SEARCH



Aminopropyl trimethoxy silane

Methacrylate propyl trimethoxy silane

Methacryloxy propyl trimethoxy silane

Methacryloxypropyl trimethoxy silane

Trimethoxy

Trimethoxy silane

Vinyl trimethoxy silane

Y-Methacryloxypropyl trimethoxy silane

© 2024 chempedia.info