Shedding separators

Clothing used in dean areas is laundered or deaned in such a way that it does not gather additional particulate contaminants that can later be shed. Separate laundry facilities for such dothing are desirable. If fibres are damaged by inappropriate cleaning or... 

For safety reasons, some fireworks manufacturers store their products in metal sheds separated by sand banks. Also, people who work with fireworks are advised to wear cotton clothing because cotton is less likely than other fabrics to develop a static charge, which can cause a spark and accidentally ignite fireworks. 

Vortex-Shedding Flowmeters These flowmeters take advantage of vortex shedding, which occurs when a fluid flows past a non-streamlined objec t (a Blunt body). The flow cannot follow the shape of the object and separates from it, forming turbulent vortices or eddies at the object s side surfaces. As the vortices move downstream, they grow in size and are eventually shed or detached from the objec t. 

In 1898, Marie and Pierre Curie isolated two new radioactive elements, which they named radium and polonium. To obtain a few milligrams of these elements, they started with several tons of pitchblende ore and carried out a long series of tedious separations. Their work was done in a poorly equipped, unheated shed where the temperature reached 6°C (43°F) in winter. Four years later, in 1902, Marie determined the atomic mass of radium to within 0.5%, working with a tiny sample. 

Typical pore size distributions result in mean pore diameters of around 15 //m. Even long and intensive efforts did not succeed in decreasing this value decisively in order to enable production of micropo-rous pocketing material resistant to penetration [65, 66], In practice PVC separators prove themselves in starter batteries in climatically warmer areas, where the battery life is however noticeably reduced because of increased corrosion rates at elevated temperature and vibration due to the road condition. The failure modes are similar for all leaf separator versions shedding of positive active mass fills the mud room at the bottom of the container and leads to bottom shorts there, unless — which is the normal case — the grids of the positive electrodes are totally corroded beforehand. 

Because of the increased shedding with these alloys, pure leaf separation is hardly suitable. Separations with supporting glass mats or fleeces as well as microfiber glass mats provide technical advantages, but are expensive and can be justified only in special cases. Also under these conditions of use the microporous polyethylene pocket offers the preferred solution [40]. Lower electrical properties at higher temperatures, especially decreased cold crank duration, are battery-related the choice of suitable alloys and expanders gains increased importance. 

Chiral heterogeneous catalysts, although have lower enantioselectivity and stability than homogeneous catalysts, are often preferable because of their handling and separation properties (5). Aim of this work was to shed light on the enantioselective hydrogenation of a,p-unsaturated acids or their... 

Vortex-induced separator, 22 62-63 Vortex-induced vibration, 11 756 Vortex meters, mass flowmeters, 20 681 Vortex patterns, 11 755 Vortex precession meters, 11 668 Vortex shedding, 11 756 Vortex shedding meters, 11 668-669 Vortices, superconductor, 23 824-825 Voyage charters, 25 327 VP Sandoflam 5085, 11 491 V-type inks, 14 326 Vulcanizable silicone rubber, 25 129 Vulcanizable silicones, properties and applications of, 22 594-595, 596-597 Vulcanizates EPDM, 10 713 EPM/EPDM, 10 715 ethylene-acrylic elastomer, 10 698,... 

As Re increases, skin friction becomes proportionately less and, at values greater than about 20, flow separation occurs with the formation of vortices in the wake of the sphere. At high Reynolds numbers, the size of the vortices progressively increases until, at values of between 100 and 200, instabilities in the flow give rise to vortex shedding. The effect of these changes in the nature of the flow on the force exerted on the particle is now considered. 

A strong test of this theory is presented by a blend of two dynamically different components (but of identical local chemistry) such that the volume fraction of both is large. Two cases of especial interest suggest themselves blends of linear with star polymers [42,55] and blends of star polymers with widely separated molecular weights [56]. Recent work on both these systems has shed further light on the nature of co-operative constraint release and the remarkable power of the theoretical tools we now have at hand. 

Liposomes (SUVs) were prepared by probe sonication according to standard procedures (31) in the presence of STPP. A mixture of lecithin, cholesterol, and STPP (PC/Ch/STPP = 65/15/20, molar ratio final total lipid 25 mg/ mL) was dissolved in chloroform followed by removal of the organic solvent using a rotary evaporator. After adding 5 mM HEPES (pH 7.4) to the dry lipid film, the sample was probe sonicated with a Sonic Dismembrator (Model 100, Fischer Scientific) at a power output of approximately 10 W for 30 minutes. To remove any titanium particles, which have been shed from the tip of the probe during sonication, the sample was centrifuged for 10 minutes at 3000 X g. The formed liposomes were separated from free, i.e., nonincorporated, STPP by gel filtration chromatography on a Sephadex G-15 column. 

---