Separations capillary electrophoresis

Liu, Y., Sweedler, J.V. (1996). Two-dimensional separations capillary electrophoresis coupled to channel gel electrophoresis. Anal. Chem. 68(22), 3928-3933. 

Keywords Miniaturization, integration, microcolumn separations, capillary electrophoresis. 

Haab B B and Mathies R A 1999 Single-molecule detection of DNA separations in microfabricated capillary electrophoresis chips employing focused molecular streams Ana/. Chem. 71 5137-45... 

In capillary electrophoresis the conducting buffer is retained within a capillary tube whose inner diameter is typically 25-75 pm. Samples are injected into one end of the capillary tube. As the sample migrates through the capillary, its components separate and elute from the column at different times. The resulting electrophero-gram looks similar to the chromatograms obtained in GG or HPLG and provides... 

The electroosmotic flow profile is very different from that for a phase moving under forced pressure. Figure 12.40 compares the flow profile for electroosmosis with that for hydrodynamic pressure. The uniform, flat profile for electroosmosis helps to minimize band broadening in capillary electrophoresis, thus improving separation efficiency. 

A form of capillary electrophoresis in which separations are based on differences in the solutes electrophoretic mobilities. 

Conradi, S. Vogt, C. Rohde, E. Separation of Enatiomeric Barbiturates by Capillary Electrophoresis Using a Cyclodextrin-Containing Run Buffer, /. Chem. Educ. 1997, 74, 1122-1125. 

Weber, P. L. Buck, D. R. Capillary Electrophoresis A Past and Simple Method for the Determination of the Amino Acid Composition of Proteins, /. Chem. Educ. 1994, 71, 609-612. This experiment describes a method for determining the amino acid composition of cyctochrome c and lysozyme. The proteins are hydrolyzed in acid, and an internal standard of a-aminoadipic acid is added. Derivatization with naphthalene-2,3-dicarboxaldehyde gives derivatives that absorb at 420 nm. Separation is by MEKC using a buffer solution of 50 mM SDS in 20 mM sodium borate. 

Capillary Electrophoresis. Capillary electrophoresis (ce) or capillary 2one electrophoresis (c2e), a relatively recent addition to the arsenal of analytical techniques (20,21), has also been demonstrated as a powerful chiral separation method. Its high resolution capabiUty and lower sample loading relative to hplc makes it ideal for the separation of minute amounts of components in complex biological mixtures (22,23). 

Capillary Electrophoresis. Capillary electrophoresis (ce) is an analytical technique that can achieve rapid high resolution separation of water-soluble components present in small sample volumes. The separations are generally based on the principle of electrically driven ions in solution. Selectivity can be varied by the alteration of pH, ionic strength, electrolyte composition, or by incorporation of additives. Typical examples of additives include organic solvents, surfactants (qv), and complexation agents (see Chelating agents). 

The heating effect is the limiting factor for all electrophoretic separations. When heat is dissipated rapidly, as in capillary electrophoresis, rapid, high resolution separations are possible. For electrophoretic separations the higher the separating driving force, ie, the electric field strength, the better the resolution. This means that if a way to separate faster can be found, it should also be a more effective separation. This is the opposite of most other separation techniques. 

We have developed the method for quantitative analysis of urinary albumin with CE. A capillary electrophoresis systems Nanophor 01 (Institute of Analytical Instmmentation, Russian Academy of Sciences, Saint-Petersburg) equipped with a UV-detector was used to determine analyte. Separation was achieved using 45 cmx30 p.m I.D. fused silica capillary column with UV-detection at 214 nm. 

A capillary electrophoresis systems CAPEE 103R ( Eumex Etd, Saint-Petersburg) equipped with a UV-detector was used to separate and quantify analytes. 

One of the important problems in the diagnosis of different disease in their early stages is the determination of bio-active substances in biological fluids. We are currently interested in applying capillary electrophoresis (CE) as technique for the rapid and highly efficient separation of corticosteroids in semm and urine. Steroids can analyze by MEKC. 

This chapter will first cover the nature of electrophoretic separations, especially those concerning capillary electrophoresis. Comprehensive multidimensional separations will then be defined, specifically in terms of orthogonality and resolution. The history of planar and non-comprehensive electrodriven separations will then be discussed. True comprehensive multidimensional separations involving chromatography and capillary electrophoresis will be described next. Finally, the future directions of these multidimensional techniques will be outlined. 

The only other group to have performed comprehensive multidimensional reverse-phase HPLC-CZE separations is at Hewlett-Packard. In 1996, a two-dimensional LC-CE instrument was described at the Erederick Conference on Capillary Electrophoresis by Vonda K. Smith (21). The possibility for a commercial multidimensional instrument may have been explored at that time. 

P. D. Grossman, J. C. Colburn, H. H. Lauer, R. G. Nielsen, R. M. Riggin, G. S. Sittampalam and E. C. Rickard, Application of free-solution capillary electrophoresis to the analytical scale separation of proteins and peptides . Anal. Chem. 61 1186-1194 (1989). 

T. F. Elooker, D. J. Jeffery and J. W. Jorgenson, Two-dimensional separations in high-performance capillary electrophoresis, in High Performance Capillary Electrophoresis, M. G. Khakedi (Ed.), John Wiley Sons, New York, pp. 581-612 (1998). 

J. P. Larmann-Jr, A. V. Lemmo, A. W. Moore-Jr and J. W. Jorgenson, Two-dimensional separations of peptides and proteins by comprehensive liquid cliromatography-capillary electrophoresis . Electrophoresis 14 439-447 (1993). 

---