SELECT command

Name any one-atom, two-atom, three-atom, or four-atom selection with the Select/Select command. 

In the field of imaging, present-day software should use mouse-driven or menu-selectable commands to control the camera and allow real-time image capture. The latter feature allows the users to monitor the image buildup and trigger the capture at the best moment. Temperature control and exposure times should... 

This tutorial will specify every command, in order, for the processing and alignment of three fruit fly genomes. Commands to be run will be specified by lines beginning with. The output for some commands will be shown and truncated output will be indicated by ellipses (...). Approximate running times for selected commands will be specified as comments. Running times are for an Apple PowerBook with a 1.25 GHz PowerPC G4 processor and 1 GB of RAM. 

An essential use of the Select command is to select data from different tables using the joining capabilities of RDBMS. Suppose there is another table of assay data defined using... 

Commands, such as show, add, or delete, are displayed as tabs in the lower part of the toolbox see Figure 17.2). Depending on which item is selected in the tree area, the available commands vary. The show command is always present it displays the contents of the current item. The add command is used for adding another item, for example, another molecule in a system or a force field. There are a number of actions displayed at the bottom of the toolbox. The most common action is confirm to execute the selected command. 

Verify the correct operation of the program by running the calculation on the test files provided. To do this, open a DOS window by selecting Command Prompt ... 

Remove semicolons from selected commands in the script so that intermediate results are displayed. 

Prior to a statistical evaluation of search results enter SET TERMSET L, in order to store the selected terms with L- instead of E-numbers. The next move consists of selecting the field to be evaluated using the SELECT command (Fig. 132). When analyzing patentees, remember that different spelling gives several answers which have to be added by hand after the online search. An evaluation using the Company Code requires manual offline transformation of the Company Codes into company names, in order to pass on the result to the client. 

The fields can also be used for statistical analysis. If you wish to find out how often a certain company is named in relation to a certain product, you may use the SELECT command, to generate a table, ranking the relevant field in alphabetic or numeric order of occurrencs (Fig. 145). 

Figure 166 shows that a search for cobalt phthalocyanine as reaction product must be done with several names. Therefore it is easier to look for the molecular formula and display the results in the free of charge format IDETAB. In a second step the results can be selected by the SELECT command. 

Select the Sctup/Coinpile Parameters command to recompile the set of txt files or files into a par file, a binary description of all the parameters of a given parameter set. 

The calculation setup screens list a good selection of the options that are most widely used. However, it is not a complete list. The user also chooses which queue to use on the remote machine and can set queue resource limits. All of this is turned into a script with queue commands and the job input file. The user can edit this script manually before it is run. Once the job is submitted, the inputs are transferred to the server machine, the job is run and the results can be sent back to the local machine. The server can be configured to work with an NQS queue system. The system administrator and users have a reasonable amount of control in configuring how the jobs are run and where files are stored. The administrator should look carefully at this configuration and must consider where results will be sent in the case of a failed job or network outage. 

Specify the modified parameter set with the Setup/Select Parameter Set command. 

This book is the result of a number of years experience in the compiling and editing of data useful to chemists. In it an effort has been made to select material to meet the needs of chemists who cannot command the unlimited time available to the research specialist, or who lack the facilities of a large technical library which so often is not conveniently located at many manufacturing centers. If the information contained herein serves this purpose, the compiler will feel that he has accomplished a worthy task. Even the worker with the facilities of a comprehensive library may find this volume of value as a time-saver because of the many tables of numerical data which have been especially computed for this purpose. 

Using MATLAB to design a system, it is possible to superimpose lines of constant ( and ajn on the root locus diagram. It is also possible, using a cursor in the graphics window, to select a point on the locus, and return values for open-loop gain K and closed-loop poles using the command... 

This produces the (pole-zero cancellation) root locus plot shown in Figure 5.18. When run, exampSlO.m allows the user to select the value of K that corresponds to ( = 0.7, and then uses this selected value to plot the step response. The text that appears in the command window is... 

Note that r locus and r locf ind works for both continuous and discrete systems. The statement squar e provides square axes and so provides a round unit circle. The command zgr id creates a unit circle together with contours of constant natural frequency and damping, within the unit circle. When examp76.m has been run, using r locf ind at the MATLAB prompt allows points on the loci to be selected and values of K identified (see Figure 7.20)... 

Employees outside immediate release area who assist on-scene incident commander All activities coordinated through individual in charge of the incident command system Examples industrial hygienists or health physicists providing guidance on PPL selection Individuals likely to witness or discover a release and who are trained to initiate emergency response sequence... 

Selection 3 from the FTAPSUIT menu (Figure 6.4-3) runs FTAPlus to prepare input for the postprocessor (Figure 6.4-5). To print the contents of the block file, the postprocessor input must contain either the command PRTDNF or FRMBLK (selections 2 and 3 respectively). The command PRTDNF (print equation in disjunctive normal form) allows you to display the contents of a punch file in readable form. FRMBLK (form block) is required to generate an FTAP input file. The... 

After selecting the MEX command (selection 5) the comma delimited input consists of groups of basic events that are pairwise mutually exclusive. To extend the group to the next and subsequent lines, the first field must be blank. Up to 100 names per group are allowed with a new group starting when a non-blank character is encountered in the first field. The number of pairs that are mutually exclusive is n /[(n-2) 2 ], where n is the number of basic events in the group. An example for the plant blackout fault tree is DG-A-M,DG-B-M,DG-C-M (where means enter). 

After selecting the MEX command (selection 5) the comma delimited input cr" uf... 

Selection 6 (Figure A-4) executes the SUB command. The comma-delimited input alternates... 

In addition to understanding the PSM system and its implementation, in-hou e trainers need skills development training to enable tiiem to fulfill their roles effectively. Everyone has had the dismal experience of listening to speakers or teachers whose command of their subject may be excellent, but who are incapable of conveying it in a useful, much less interesting, manner. To help avoid this, be selective in recruiting in-house trainer candidates the best people for this task have confidence, enthusiasm, and an ability to communicate well. 

The NPRDS is an industry-wide system for monitoring the performance of selected systems and components at U.S. commercial nuclear power plants. Information in NPRDS is derived from a standardized format input report prepared by U.S. nuclear plant licensees. The plants are as)ced to submit failure reports on catastrophic events and degraded failures within the defined reportable scope reporting of incipient events is optional. Command faults are not reportable unless they malce an entire system unavailable. In addition, the plants are as)ced to file component engineering reports on all components within the selected systems and reportable scope. These reports contain detailed design data, operating characteristics, and performance data on the selected systems and components (over 3000 components, from approximately 30 systems, per unit). The selected systems are primarily safety systems. 

EGSG Idaho s Idaho National Engineering Laboratory reviewed Licensee Event Reports (LERs), both qualitatively and quantitatively, to extract reliability information in support of the USNRC s effort to gather and analyze component failure data for U.S. commercial nuclear power plants. LERs describing failures or command faults (failure due to lack of needed input) for selected components have been analyzed in this program. Separate reports have been issued for batteries and battery chargers, control rods and drive mechanisms, diesel generators, ISC, Inverters, primary containment penetrations, protective relays and circuit breakers, pumps, and valves. 

---