Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Rhodium functionalized

Mirkin and coworkers reported on catalytic molecular tweezers used in the asymmetric ring opening of cyclohexene oxide. In this case the early transition metal is the catalyst and rhodium functions as the structural inductor metal. The catalyst consists of two chromium salen complexes, the reaction is known to be bimetallic, and a switchable rhodium complex, using carbon monoxide as the switch. Indeed, when the salens are forced in dose proximity in the absence of CO the rate is twice as high and the effect is reversible [77]. [Pg.280]

This is an ion-exchanger like the sulfonated polymer. The siUca surface can also be functionalized with phosphine complexes when combined with rhodium, these give anchored complexes that behave like their soluble and polymer-supported analogues as catalysts for olefin hydrogenation and other reactions ... [Pg.175]

In addition to platinum and related metals, the principal active component ia the multiflmctioaal systems is cerium oxide. Each catalytic coaverter coataias 50—100 g of finely divided ceria dispersed within the washcoat. Elucidatioa of the detailed behavior of cerium is difficult and compHcated by the presence of other additives, eg, lanthanum oxide, that perform related functions. Ceria acts as a stabilizer for the high surface area alumina, as a promoter of the water gas shift reaction, as an oxygen storage component, and as an enhancer of the NO reduction capability of rhodium. [Pg.370]

The dimethyl ketal function (51) is one of the most suitable base stable protecting groups for saturated 5a- and 5/i-3-ketones. It is formed by reaction of the ketone (50) with methanol in the presence of a suitable catalyst. Good selectivity can also be achieved with this group since 2-, 6-, 11-, 12-, 17- and 20-ketones do not form dimethyl ketals under these conditions. The 2-ketone is converted in part to the dimethyl ketal in the presence of homogeneous rhodium catalyst. "" y -Toluenesulfonic acid is the catalyst of... [Pg.388]

Organometallic chemistry of pyrrole is characterized by a delicate balance of the ti N)- and -coordination modes. Azacymantrene is an illustration of the considerable nucleophilicity of the heteroatom. However, azaferrocene can be alkylated at C2 and C3 sites. Ruthenium and osmium, rhodium, and iridium chemistry revealed the bridging function of pyrroles, including zwitterionic and pyrrolyne complex formation. The ti (CC) coordination of osmium(2- -) allows versatile derivatizations of the heteroring. [Pg.178]

In the rhodium and iridium complexes, the C-coordination, carbene function, and cyclometallated cases prevail. Benzothiazole-2-thione was studied extensively as a ligand and various situations of the exocyclic S-monodentate coordination as well as N,S-combinations in the di-, tri-, and tetranuclear species were discovered. [Pg.212]

Whereas the utility of these methods has been amply documented, they are limited in the structures they can provide because of their dependence on the diazoacetate functionality and its unique chemical properties. Transfer of a simple, unsubstituted methylene would allow access to a more general subset of chiral cyclopropanes. However, attempts to utilize simple diazo compounds, such as diazomethane, have never approached the high selectivities observed with the related diazoacetates (Scheme 3.2) [4]. Traditional strategies involving rhodium [3a,c], copper [ 3b, 5] and palladium have yet to provide a solution to this synthetic problem. The most promising results to date involve the use of zinc carbenoids albeit with selectivities less than those obtained using the diazoacetates. [Pg.86]

Platinum, palladium, and rhodium will function well under milder conditions and are especially useful when other reducible functions are present. Freifelder (23) considers rhodium-ammonia the system of choice when reducing -amino nitriles and certain )5-cyano ethers, compounds that undergo extensive hydrogenolysis under conditions necessary for base-metal catalysis. [Pg.97]

Noble-metal catalysts can be used under mild conditions. Rhodium 16,24,61,73) has given excellent results. Rhodium seems esp>ecially useful when other catalysts give excessive secondary amine. Ruthenium functions best in aqueous media, but under these conditions it is apt to promote extensive... [Pg.99]

Rhodium (2J) and ruthenium are excellent catalysts for the reduction of aromatic rings. It is with these catalysts that the best chance resides for preservation of other reducible functions (2,10,13,18,41,42,52). Rhodium (41) and ruthenium (45) each reduced methylphenylcarbinol to methylcyclohexyl-carbinol in high yield. Palladium, on the other hand, gives ethylbenzene quantitatively. Water has a powerful promoting effect, which is unique in ruthenium catalysis (36). [Pg.118]

An excellent route to cyclohexylamines is by hydrogenation of the corresponding aniline over rhodium or ruthenium (17,18,19 2 36,63,64). Rhodium has proved especially useful in saturation of alkoxyanilines with minimal hydrogenolysis of the alkoxy function (45), The extent of hydrogenol ysis occurring in saturation of alkoxyanilines depends also on the solvent. Hydrogenolysis of p-methoxyaniline over Ru(OH)2 fell with alcohol solvent in the order methanol (35%) > ethanol (30%) > propanol (26%) > butanol (22%) > isopropanol (16%) > r-butanol (8%) (43). [Pg.126]

To date, these functionalized ligands have been investigated on the laboratory scale, in batch operations to immobilize rhodium catalyst in hydroformylation. [Pg.267]

The diazo function in compound 4 can be regarded as a latent carbene. Transition metal catalyzed decomposition of a diazo keto ester, such as 4, could conceivably lead to the formation of an electron-deficient carbene (see intermediate 3) which could then insert into the proximal N-H bond. If successful, this attractive transition metal induced ring closure would accomplish the formation of the targeted carbapenem bicyclic nucleus. Support for this idea came from a model study12 in which the Merck group found that rhodi-um(n) acetate is particularly well suited as a catalyst for the carbe-noid-mediated cyclization of a diazo azetidinone closely related to 4. Indeed, when a solution of intermediate 4 in either benzene or toluene is heated to 80 °C in the presence of a catalytic amount of rhodium(n) acetate (substrate catalyst, ca. 1000 1), the processes... [Pg.254]

In the context of 12, the diazo keto function and the thiolactam are in proximity. This circumstance would seem to favor any process leading to the union of these two groupings. It is conceivable that decomposition of the diazo function in 12 with rhodium(n) acetate would furnish a transitory electron-deficient carbene which would be rapidly intercepted by the proximal thiolactam sulfur atom (see 20, Scheme 4). After spontaneous ring contraction of the... [Pg.475]

FlC. 26. A log-log plot of the ratio of the absorbances of lines attributed to RhylOj), species to that of a RhlO,), reference absorption as a function of the total rhodium concentration [RhJo at constant dioxygen deposition-rate (120). [Pg.119]

To date most of the nitriles studied have been simple alkyl or aromatic derivatives with little other functionality. We recently attempted to extend the reaction to iV-protected a-aminonitriles, derived by dehydration of a-aminoacid amides (Path A, Scheme 25), but this proved unsatisfactory, and therefore we investigated an alternative diazocarbonyl based route in which the order of steps was reversed, i.e. a rhodium catalysed N-H insertion reaction on the amide followed by cyclodehydration to the oxazole (Path B, Scheme 25). [Pg.14]

Finally, these aqueous suspensions of rhodium(O) and iridium(O) are the most efficient systems for the hydrogenation of a large variety of mono-, di-substituted and/or functionalized arene derivatives. Moreover, in our approach, the reaction mixture forms a typical two-phase system with an aqueous phase containing the nanoparticle catalyst able to be easily reused in a recycling process. [Pg.273]

Sodium salts of sulfonated triphenylphosphine P(m-C5H4S03Na)3 or alkyltriphenyl-methyltrisulfonates function as stabilizers for hydrosols of colloidal rhodium and (C6H5)2P-p-C6H5S03Na has been used by Schmid to prepare water soluble gold clusters which are isolable and redispersible without agglomeration [202]. [Pg.29]


See other pages where Rhodium functionalized is mentioned: [Pg.606]    [Pg.238]    [Pg.78]    [Pg.319]    [Pg.606]    [Pg.238]    [Pg.78]    [Pg.319]    [Pg.42]    [Pg.200]    [Pg.200]    [Pg.200]    [Pg.378]    [Pg.129]    [Pg.138]    [Pg.168]    [Pg.184]    [Pg.171]    [Pg.73]    [Pg.99]    [Pg.214]    [Pg.559]    [Pg.43]    [Pg.96]    [Pg.1003]    [Pg.1003]    [Pg.1036]    [Pg.1037]    [Pg.170]    [Pg.224]    [Pg.135]    [Pg.143]    [Pg.315]    [Pg.272]    [Pg.259]    [Pg.144]   
See also in sourсe #XX -- [ Pg.179 ]




SEARCH



Rhodium catalysts indole functionalization

Rhodium-Catalyzed Asymmetric Hydrogenation of Functionalized Alkenes

Rhodium-Catalyzed Enantioselective Hydrogenation of Functionalized Ketones

Rhodium-catalyzed synthesis functionalization

© 2024 chempedia.info