Resistivity, electrical quartz

Ca.rhothermic Reduction. Sihcon carbide is commercially produced by the electrochemical reaction of high grade siUca sand (quartz) and carbon in an electric resistance furnace. The carbon is in the form of petroleum coke or anthracite coal. The overall reaction is... 

A similar unit, modified in details such as location of condenser, use of an agitator and shape of the vessel, was used by Fisher and Whitney . Further substantial modifications to permit interface location of specimens, cooling of specimens and operation under applied pressure, have been described by Fisher . Earlier laboratory test methods tried by Fisher and Whitney included exposure of specimens heated by their own electrical resistance and of tubular specimens containing a pencil-type resistance-wire heater in a quartz tube. 

Pulse-mode pyrolyzers include resistively-heated electrical filaments or ribbons and radio frequency induction-heated wires [841,842,846,848,849]. The filament or ribbon-type pyrolyzers are simple to construct. Figure 8.45, and typically consist of an inert wire or ribbon (Pt or Pt-Rh alloy) connected to a high-current power supply. Samples soluble in a volatile solvent are applied to the fileutent as a thin film. Insoluble materials are placed in a crucible or quartz tube, heated by a basket-lilce shaped or helical wound filiunent. The coated filament is contained within a low dead volume chamber through which the carrier gas flows, sweeping the pyrolysis products onto the column. The surface temperatui of the filament is raised rapidly from ambient temperature to He equilibrium pyrolysis temperature. This... 

The EDL system is modular and consists of two basic parts, a gas filled bulb and a power supply with waveguides or external electrodes. A typical EDL consists of a scaled (usually quartz) tube envelope, which contains an inert gas (such as a noble gas) and an excitable substance (e. g. Hg, Cd, Na, Ga, In, Tl, Sc, S, Se, or Te) [30]. The envelope material must be impermeable to gases, an electrical insulator, and chemically resistant to the filling compounds at the temperature of operation. 

Poly(phenylene sulfide) (PPS Ryton) is a solvent-resistant plastic that is useful in high-temperature service (structure 4.71). PPS is used for pumps, sleeve bearing, cookware, quartz halogen lamp parts, and electrical appliance housings. 

Very often particles are blended into polymers, in thermoplasts as well as in thermosets and in synthetic rubbers. This is done for various reasons the aim may be stiffness, strength, hardness, softening temperature, a reduction of shrinkage in processing, reduction of thermal expansion or electric resistance, or, simply, to reduce the price of the material. The fillers used are wood flour, carbon black, glass powder, chalk, quartz powder, mica, molybdene sulphide, various metal oxides, etc. etc. 

Diffusion couples were encapsulated in quartz ampoules filled with argon. Their annealing was carried out in electric-resistance furnaces, with the temperature deviations from the required value, not exceeding 1°C. After annealing, the couples were cut along the cylindrical axis and... 

Since the unloaded QCM is an electromechanical transducer, it can be described by the Butterworth-Van Dyke (BVD) equivalent electrical circuit represented in Fig. 12.3 (box) which is formed by a series RLC circuit in parallel with a static capacitance C0. The electrical equivalence to the mechanical model (mass, elastic response and friction losses of the quartz crystal) are represented by the inductance L, the capacitance C and the resistance, R connected in series. The static capacitance in parallel with the series motional RLC arm represents the electrical capacitance of the parallel plate capacitor formed by both metal electrodes that sandwich the thin quartz crystal plus the stray capacitance due to the connectors. However, it is not related with the piezoelectric effect but it influences the QCM resonant frequency. 

---