Resistance to Hydration

These reactions lead to the breaking down of the refractories concerned. Factors controlling the hydration reaction are temperature, exposure time, and degree of product susceptibility. An increase in each of these factors increases the hydration. 

Tests for hydration resistance can be done under pressure or without pressure application. Under pressure, tests can be conducted in an autoclave or in a pressure cooker. A humidity chamber can be used for testing without pressure. 

The specimens are kept in the equipment for a set time or until disintegration occurs [2,8]. 

The standard procedure for the hydration tendency of dolomite is given in ASTM C492-92 and for that of magnesite in ASTM C544-92. 

---

Resistance to hydration was elucidated with tricyclic model compounds that lack the side chain and, hence, pharmacological activity. In this context, a useful comparison has been made between two meso compounds, namely 5W-dibenz.oja, dIcycloheplene 10,11-oxide (10.130, X = CH2) and d.v-slilbcnc oxide (10.7) [195]. The former compound proved to be a very poor substrate for rabbit liver microsomal EH, with a Km value comparable to that of cis-stilbene oxide, but Emax ca. 100-fold lower. This indicates that the two compounds have a comparable affinity for the enzyme, but that nucleophilic attack in the catalytic step is much less efficient for dibcnzo[ // cycloheplcnc 10,11-oxide than for d.v-slilbcnc oxide. This implies that the former compound acts better as an inhibitor than as a substrate of microsomal EH. Furthermore, there was also a fundamental steric difference in the reaction course of the two substrates, since the predominant stereoisomer formed from dibenzo //]cyclohep(ene 10,11-oxide had the (I OS, 11. -configuration,... 

Phosphoric acid anodization (PAA)( > is a common method of surface preparation of aluminum adherends prior to adhesive bonding for aerospace applications. PA A surfaces are microscopically rough(6) and are more resistant to hydration than aluminum surfaces prepared by other treatments.(2,90) The microroughness provides for mechanical interlocking with the primer or adhesive, which results in a strong adhesive bond, while the environmental stability of the oxide (together with its porosity) results in excellent bond durability in hot, humid environments. 

CAA oxides protect the metal surface from hydration due to their inherent thickness the important factor for bond durability is the stability of the outer oxide structure when water diffuses through the bondline to the polymer-oxide interface. Because hydration rates at the oxide-metal interface are controlled by the thickness of the barrier layer (i.e., they are directly proportional to the anodizing voltage), typical CAA processes yield oxides that are more resistant to hydration than FPL surfaces. Direct comparisons between the normal surface treatments using durability tests show that CAA adherends can perform as well as PAA adherends.(6J,5i,52)... 

The metal preparation method should be optimized and controlled to produce an aluminum oxide of maximum porosity, strength, and resistance to hydration. ... 

As can be seen, natural dolomite has a much better resistance to hydration than synthetic dolomite and in some cases not much worse than some high-purity magnesite. 

Dead-burned magnesia, characterized by large crystaUite size and very low chemical reactivity, is resistant to the basic slags employed in the metals refining industry. It reacts very slowly with strong acids, and does not readily hydrate or react with carbon dioxide unless finely pulverized. 

Calcium Hypochlorite. High assay calcium hypochlorite [7778-54-3] was first commercialized in the United States in 1928 by Mathieson Alkali Works, Inc. (now Olin Corp.) under the trade name HTH. It is now produced by two additional manufacturers in North America (Table 5). Historically, it usually contained about 1% water and 70—74% av CI2, so-called anhydrous product, but in 1970, a hydrated product was introduced (234). It is similar in composition to anhydrous Ca(OCl)2 except for its higher water content of about 6—12% and a slightly lower available chlorine content. This product has improved resistance to accidental initiation of self-sustained decomposition by a Ht match, a Ht cigarette, or a small amount of organic contamination. U.S. production in the 1990s consists primarily of partially hydrated Ca(OCl)2, which is sold as a 65% av CI2 product mainly for swimming pool use. Calcium hypochlorite is also sold as a 50% av CI2 product as a sanitizer used by dairy and food industries and in the home, and as a 32% product for mildew control. 

Endotliermic Decompositions These decompositions are mostly reversible. The most investigated substances have been hydrates and hydroxides, which give off water, and carbonates, which give off CO9. Dehydration is analogous to evaporation, and its rate depends on the moisture content of the gas. Activation energies are nearly the same as reaction enthalpies. As the reaction proceeds in the particle, the rate of reaction is impeded hy resistance to diffusion of the water through the already formed product. A particular substance may have sever hydrates. Which one is present will depend on the... 

In addition to the four compounds discussed above, the final Portland cement may contain gypsum, alkali sulfates, magnesia, free lime and other components. These do not significantly affect the properties of the set cement, but they can influence rates of hydration, resistance to chemical attack and slurry properties. 

---