Requirement of locality

Starting from a completely different angle, namely, the nuclear Lagrangean and the requirement of local gauge invariance, we have shown in Section IV.B... 

Depending on the requirements of local fire officers, statutory regulations and insurance bodies (or any other documents or bodies having jurisdiction), there may well be a need to address the clearance of smoke from escape routes, the control of smoke spread generally and the removal of smoke during and after firefighting activities. 

The facility design should meet the requirements of local national regulations and a company s policies pertaining to safety, health, and protection of the environment. 

Motors, electrical components, and electrical installations shall be suitable for the area classification (class, group, division, or zone) specified by the purchaser and shall meet the requirements of local codes (such as NFPA 70, Articles 500,501, and 502) specified by the purchaser. 

Two disadvantages of multipole partitioning should be mentioned. The first is that any density not fitted by the model is discarded in the partitioning process. Examination of the residual density is required to ensure the completeness of the set of modeling functions. The second is that very diffuse functions of the model, if included, violate the requirement of locality discussed above, and may lead to counterintuitive results. 

The recommendations on water management (Section 3.9) contain some very valuable approaches. The site-specific management requirements of local climate and geography are clearly recognized, as well as the necessity to address salinity on a catchment and community scale. While the standards do not take up the requirement of a watershed-scale approach, they do mention that measures of groundwater recharge and discharge control must be implemented, if salinity is present. 

CPT invariance is a fundamental property of quantum field theories in flat space-time which results from the basic requirements of locality, Lorentz invariance and unitarity [1,2,3,4,5]. A number of experiments have tested some of these predictions with impressive accuracy [6], e.g. with a precision of 10-12 for the difference between the moduli of the magnetic moment of the positron and the electron [7] and of 10-9 for the difference between the proton and antiproton charge-to-mass ratio [8],... 

There are many other reasons why pharmaceutical and healthcare organizations are required to hold records, not just for regulatory purposes. The record-keeping requirements of local environmental, safety, or financial regulations should also be considered when determining the length of time a record is required to be held. Whatever requirement stipulates the longest retention time is the one that should be adhered to and recorded to determine the disposal criteria. 

Control emissions of dust and noise to meet the requirements of local regulations and the reasonable expectations of persons living nearby. In particular, if explosives are used, control air blast and ground vibration as required. 

The equipment shall be of a type, capacity, and mechanical condition suitable for doing the work in an effective and efficient manner. All equipment including all power sources, cables, chemical containers, scaffolds, and anything used in the performance of the work, shall meet all applicable safety and other requirements of Local, State, and Federal ordinances, laws, regulations, and codes. 

Are there any stereochemical requirements of local anesthetic compounds when they bind to the sodium channel receptors A number of clinically used local anesthetics do contain a chiral center (i.e., bupivacaine, etidocaine, mepivacaine, and prilocaine) (Table 16.2), but in contrast to cholinergic drugs, the effect of optical isomerism on isolated nerve preparations revealed a lack of stereospecificity. In a few cases (e.g., prilocaine, bupivacaine, and etidocaine), however, small differences in the total pharmacological profile of optical isomers have been noted when administered in vivo (41,42,43). Whether these differences result from differences in uptake, distribution, and metabolism or from direct binding to the receptor has not been determined. 

Another valuable quality test for electrolyte solution calculations is based upon the zeroth and second moment conditions of Stillinger and Lovett. To apply these conditions, the first of which is equivalent to the requirement of local electroneutralitywe define the zeroth and second moment defects for an ion of species a as follows ... 

Any activities fall within the requirements of local legislation, codes, standards, etc. 

Temperatures of gas cylinder storage areas should never be allowed to exceed 125 °F. Highly toxic gases should be stored inside a well-ventilated area that can be secured. Gas cylinder storage areas may need to meet additional requirements of local area building codes. 

Regulatory Company ComplianceiThe facility should meet the requirements of local, national, or international regulations and company polices pertaining to safety health and the protection of the environment. 

Understanding project-related requirements in local, state, and federal laws and rules The practice of engineering and some other technical professions in the public and private sector is typically heavily influenced and constrained by the requirements of local, regional, state, and federal laws and administrative rules. You are strongly urged to learn about those requirements in the early stages of a project. 

---