Refinery catalysts octane number

Isomerization. Isomerization of any of the butylene isomers to increase supply of another isomer is not practiced commercially. However, their isomerization has been studied extensively because formation and isomerization accompany many refinery processes maximization of 2-butene content maximizes octane number when isobutane is alkylated with butene streams using HF as catalyst and isomerization of high concentrations of 1-butene to 2-butene in mixtures with isobutylene could simplify subsequent separations (22). One plant (Phillips) is now being operated for this latter purpose (23,24). The general topic of isomerization has been covered in detail (25—27). Isomer distribution at thermodynamic equiUbrium in the range 300—1000 Kis summarized in Table 4 (25). 

Polymer Gasoline. Refinery trends tend to favor alkylation over polymerisation. Unlike the alkylation process, polymerisation does not require isobutane. The catalyst is usually phosphoric acid impregnated on kieselghur pellets. Polymerisation of butylenes is not an attractive alternative to alkylation unless isobutane is unavailable. The motor octane number of polymer gasoline is also low, and there is considerable shrinkage ia product volume. The only commercial unit to be built ia recent years is at Sasol ia South Africa. The commercial process was developed by UOP ia the 1940s (104). 

In addition to this, solid acid catalysts can also be used in the hydroisomerization cracking of heavy paraffins, or as co-catalysts in Fischer-Tropsch processes. In the first case, it could also be possible to transform inexpensive refinery cuts with a low octane number (heavy paraffins, n-Cg 20) to fuel-grade gasoline (C4-C7) using bifunctional metal/acid catalysts. In the last case, by combining zeolites with platinum-promoted tungstate modified zirconia, hybrid catalysts provide a promising way to obtain clean synthetic liquid fuels from coal or natural gas. 

The first use of platinum catalysts, the UOP Platforming process, went onstream in 1949. Originally developed to upgrade low octane number, straight-run naphtha, to high octane motor fuels, the process has since been applied to the production of LPG and high purity aromatics. With proper feed preparation, the Platforming process efficiently handles almost any refinery naphtha. 

For early polymerization units, the catalyst was phosphoric acid on a quartz or kieselguhr support. Many of these units were shut down when the demand for gasoline with increased octane numbers prompted the diversion of the olefin feeds to alkylation units that gave higher octane number products. Yet some refinery balances have more propylene than alkylation can handle, so a newer version of polymerization was introduced.It is the Dimersol process of the Institut Frangais du Petrole, for which the flow diagram is shown in Fig. 15.18. 

Isomerization. Isomerization is a catalytic process which converts normal paraffins to isoparaffins. The feed is usually light virgin naphtha and the catalyst platinum on an alumina or zeoflte base. Octanes may be increased by over 30 numbers when normal pentane and normal hexane are isomerized. Another beneficial reaction that occurs is that any benzene in the feed is converted to cyclohexane. Although isomerization produces high quahty blendstocks, it is also used to produce feeds for alkylation and etherification processes. Normal butane, which is generally in excess in the refinery slate because of RVP concerns, can be isomerized and then converted to alkylate or to methyl tert-huty ether (MTBE) with a small increase in octane and a large decrease in RVP. 

---