Radical polymerization double bonds, addition

Additions of benzoyloxy radicals to double bonds" and aromatic rings (Scheme 3.79) are potentially reversible. For double bond addition, the rate constant for the reverse fragmentation step is slow (A 10"-10 s at 25 °C) with respect to the rate of propagation during polymerizations. Thus, double bond addition is effectively irreversible. However, for aromatic substrates, the rate of the reverse process is extremely fast. While the aromatic substitution products may be trapped with efficient scavenging agents (e.g. a nitroxide " or a transition... 

Crosslinks could also form by a chain reaction, which involves the addition of polymeric free radicals to double bonds (Loan, 1967,1963). 

In a step-growth polymerization, the monomers polymerize following different reaction mechanisms, such as carbonyl addition-elimination, carbonyl addition-substitution, nucleophilic substitution, double bond addition or free radical... 

Unsaturated Group Reactions. In addition to a comprehensive review of these reactions (16), there are excellent texts (17,18). Free-radical-initiated polymerization of the double bond is the most common reaction and presents one of the more troublesome aspects of monomer manufacture and purification. 

Other nonpolymeric radical-initiated processes include oxidation, autoxidation of hydrocarbons, chlorination, bromination, and other additions to double bonds. The same types of initiators are generally used for initiating polymerization and nonpolymerization reactions. Radical reactions are extensively discussed in the chemical Hterature (3—15). 

Chemical Properties. Higher a-olefins are exceedingly reactive because their double bond provides the reactive site for catalytic activation as well as numerous radical and ionic reactions. These olefins also participate in additional reactions, such as oxidations, hydrogenation, double-bond isomerization, complex formation with transition-metal derivatives, polymerization, and copolymerization with other olefins in the presence of Ziegler-Natta, metallocene, and cationic catalysts. All olefins readily form peroxides by exposure to air. 

Additive Polyimides. Rhc ne-Poulenc s Kin el molding compound and Kerimid impregnating resin (115), Mitsubishi s BT Resins (116), and Toshiba s Imidaloy Resin (117) are based on bismaleimide (4) technology. Maleic anhydride reacts with a diamine to produce a diimide oligomer (7). Eurther reaction with additional diamine (Michael addition) yields polyaminohismaleimide prepolymer with terminal maleic anhydride double bonds. Cure is achieved by free-radical polymerization through the terminal double bonds. 

The chemical structure of SBR is given in Fig. 4. Because butadiene has two carbon-carbon double bonds, 1,2 and 1,4 addition reactions can be produced. The 1,2 addition provides a pendant vinyl group on the copolymer chain, leading to an increase in Tg. The 1,4 addition may occur in cis or trans. In free radical emulsion polymerization, the cis to trans ratio can be varied by changing the temperature (at low temperature, the trans form is favoured), and about 20% of the vinyl pendant group remains in both isomers. In solution polymerization the pendant vinyl group can be varied from 10 to 90% by choosing the adequate solvent and catalyst system. 

When an unsymmetrically substituted vinyl monomer such as propylene or styrene is polymerized, the radical addition steps can take place at either end of the double bond to yield either a primary radical intermediate (RCH2-) or a secondary radical (R2CH-). Just as in electrophilic addition reactions, however, we find that only the more highly substituted, secondary radical is formed. 

Conjugated dienes can be polymerized just as simple alkenes can (Section 7.10). Diene polymers are structurally more complex than simple alkene polymers, though, because double bonds remain every four carbon atoms along the chain, leading to the possibility of cis-trans isomers. The initiator (In) for the reaction can be either a radical, as occurs in ethylene polymerization, or an acid. Note that the polymerization is a 1,4-addition of the growing chain to a conjugated diene monomer. 

Synthetic polymers can be classified as either chain-growth polymen or step-growth polymers. Chain-growth polymers are prepared by chain-reaction polymerization of vinyl monomers in the presence of a radical, an anion, or a cation initiator. Radical polymerization is sometimes used, but alkenes such as 2-methylpropene that have electron-donating substituents on the double bond polymerize easily by a cationic route through carbocation intermediates. Similarly, monomers such as methyl -cyanoacrylate that have electron-withdrawing substituents on the double bond polymerize by an anionic, conjugate addition pathway. 

In the period 1910-1950 many contributed to the development of free-radical polymerization.1 The basic mechanism as we know it today (Scheme 1.1), was laid out in the 1940s and 50s.7 9 The essential features of this mechanism are initiation and propagation steps, which involve radicals adding to the less substituted end of the double bond ("tail addition"), and a termination step, which involves disproportionation or combination between two growing chains. 

Other radical reactions not covered in this chapter are mentioned in the chapters that follow. These include additions to systems other than carbon-carbon double bonds [e.g. additions to aromatic systems (Section 3.4.2.2.1) and strained ring systems (Section 4.4.2)], transfer of heteroatoms [eg. chain transfer to disulfides (Section 6.2.2.2) and halocarbons (Section 6.2.2.4)] or groups of atoms [eg. in RAFT polymerization (Section 9.5.3)], and radical-radical reactions involving heteroatom-centered radicals or metal complexes [e g. in inhibition (Sections 3.5.2 and 5.3), NMP (Section 9.3.6) and ATRP (Section 9.4)]. 

In anionic and coordination polymerizations, reaction conditions can be chosen to yield polymers of specific microstructurc. However, in radical polymerization while some sensitivity to reaction conditions has been reported, the product is typically a mixture of microstructures in which 1,4-addition is favored. Substitution at the 2-position (e.g. isoprene or chloroprene - Section 4.3.2.2) favors 1,4-addition and is attributed to the influence of steric factors. The reaction temperature does not affect the ratio of 1,2 1,4-addition but does influence the configuration of the double bond formed in 1,4-addition. Lower reaction temperatures favor tram-I,4-addition (Sections 4.3.2.1 and 4.3.2.2). 

The bond p- to the double bond of the unsaturated disproportionation product 2 is also weaker than other backbone bonds.10 30,32 31 However, it is now believed that the instability of unsaturated linkages is due to a radical-induced decomposition mechanism (Scheme 8.7).30 This mechanism for initiating degradation is analogous to the addition-fragmentation chain transfer observed in polymerizations carried out in the presence of 2 at lower temperatures (see 6.2.3.4, 7.6.5 and 9.5.2). 

Most addition polymerizations involve vinyl or diene monomers. The opening of a double bond can be catalyzed in several ways. Free-radical polymerization is the most common method for styrenic monomers, whereas coordination metal... 

Addition polymers, which are also known as chain growth polymers, make up the bulk of polymers that we encounter in everyday life. This class includes polyethylene, polypropylene, polystyrene, and polyvinyl chloride. Addition polymers are created by the sequential addition of monomers to an active site, as shown schematically in Fig. 1.7 for polyethylene. In this example, an unpaired electron, which forms the active site at the growing end of the chain, attacks the double bond of an adjacent ethylene monomer. The ethylene unit is added to the end of the chain and a free radical is regenerated. Under the right conditions, chain extension will proceed via hundreds of such steps until the supply of monomers is exhausted, the free radical is transferred to another chain, or the active site is quenched. The products of addition polymerization can have a wide range of molecular weights, the distribution of which depends on the relative rates of chain grcnvth, chain transfer, and chain termination. 

Monomers, such as ethylene, propylene, isobutylene, and isoprene, containing the carbon-carbon double bond undergo chain polymerization. Polymerization is initiated by radical, anionic or cationic catalysts (initiators) depending on the monomer. Polymerization involves addition of the initiating species R, whether a radical, cation, or anion, to the double bond followed by its propagation by subsequent additions of monomer... 

---