1 -Propanol, 1 - synthesis

In comparable reaction conditions as Pd +Cu +Y, Pd + and Cu2+ exchanged pentasil and ferrierite zeolites show a different type of activity [31]. The main products formed by propylene oxidation on these catalysts are acrolein and propionaldehyde below 120°C and 2-propanol above 120 C. Above 150°C consecutive oxidation of 2-propano1 to acetone is observed. The catalytic role of Pd and Cu in the 2-propanol synthesis is proposed to follow the Wacker concept. It is striking that when Pd + and Cu2+ are exchanged in 10-membered ring zeolites, oxidation of a primary carbon atoms seems possible, as acrolein and propionaldehyde are obtained from propylene. 

Another synthesis avoids the isolation of 6-APA and starts directly with penidllin G. Reaction with chloromethyl pivalate gives its pivaloyloxymethyl ester. This reacts with PCI5 to an imidoyl chloride which may be solvolyzed with propanol. The add chloride of (R)-... 

Synthesis of (A) started with the combination of 2,4,6-trimethylphenol and allyl bromide to give the or/Ao-allyl dienone. Acid-catalyzed rearrangement and oxidative bydroboration yielded the dienone with a propanol group in porlactone ring were irons in the product as expected (see p. 275). Treatment with aqueous potassium hydroxide gave the epoxy acid, which formed a crystalline salt with (R)-l-(or-naphthyl)ethylamine. This was recrystallized to constant rotation. 

A two-step synthesis of indoles from o-nitrobenzaldehydes proceeds by condensation with nitromcthanc followed by reductive cyclization. Like the Leim-gruber Batcho method, the principal application of the reaction is to indoles with only carbocyclic substituents. The forniation of the o,p-dinitrostyrenes is usually done under classical Henry condensation conditions but KF/18-crown-6 in propanol was found to be an advantageous reaction medium for acetoxy-substituted compounds[1]. The o,p-dinitrostyrenes can also be obtained by nitration of p-nitrostyrenes[2]. 

In the synthesis of AGE with an acid as the catalyst, aHyl alcohol is added to the epoxy group of epichlorohydrin, yielding 3-aHyloxy-l-chloro-2-propanol [4638-03-3], which then undergoes cyclization with alkaU to yield AGE. Catalysts such as H2SO4, SnCl, BE (C2H )20 (33), heteropolyacids, HQO, andy -CH CgH SO H (34) are used. 

Sasol Fischer-Tropsch Process. 1-Propanol is one of the products from Sasol s Fischer-Tropsch process (7). Coal (qv) is gasified ia Lurgi reactors to produce synthesis gas (H2/CO). After separation from gas Hquids and purification, the synthesis gas is fed iato the Sasol Synthol plant where it is entrained with a powdered iron-based catalyst within the fluid-bed reactors. The exothermic Fischer-Tropsch reaction produces a mixture of hydrocarbons (qv) and oxygenates. The condensation products from the process consist of hydrocarbon Hquids and an aqueous stream that contains a mixture of ketones (qv) and alcohols. The ketones and alcohols are recovered and most of the alcohols are used for the blending of high octane gasoline. Some of the alcohol streams are further purified by distillation to yield pure 1-propanol and ethanol ia a multiunit plant, which has a total capacity of 25,000-30,000 t/yr (see Coal conversion processes, gasification). 

Propanol economics are sensitive to the raw material costs of ethylene (qv) and the feedstock for synthesis gas, ie, natural gas or Hquid petroleum feedstocks (qv). Natural gas-based technology is slightly more economical. 

Fig. 3. Synthesis of fluoxetine (31). 3-ChIoro-I-phenyl-I-propanol reacts with sodium iodide to afford the corresponding iodo derivative, followed by reaction with methylamine, to form 3-(methyl amin o)-1-phenyl-1-propan 0I. To the alkoxide of this product, generated using sodium hydride, 4-fluorobenzotrifluoride is added to yield after work-up the free base of the racemic fluoxetine (31), thence transformed to the hydrochloride (51)...

Studies of the synthesis of quiaolines usiag transition-metal catalysts and nonacidic conditions (55) have determined that mthenium(III) chloride is the most effective of a wide range of catalysts. The reaction between nitrobenzene and 1-propanol or 1-butanol gives 65 and 70% yields of 2-ethyl-3-methylquiQoline [27356-52-1] and 3-ethyl-2-propylquiQoline, respectively. 

Introduction of the cobalt atom into the corrin ring is preceeded by conversion of hydrogenobyrinic acid to the diamide (34). The resultant cobalt(II) complex (35) is reduced to the cobalt(I) complex (36) prior to adenosylation to adenosylcobyrinic acid i7,i -diamide (37). Four of the six remaining carboxyhc acids are converted to primary amides (adenosylcobyric acid) (38) and the other amidated with (R)-l-amino-2-propanol to provide adenosylcobinamide (39). Completion of the nucleotide loop involves conversion to the monophosphate followed by reaction with guanosyl triphosphate to give diphosphate (40). Reaction with a-ribazole 5 -phosphate, derived biosyntheticaHy in several steps from riboflavin, and dephosphorylation completes the synthesis. 

Synthesis of the intermediate aminonitrile for methadone by (I r giospecific route served to confirm the structure. Alkyla-I Lon of diphenylacetonitrile with l-chloro-2-propanol affords the. ilcohol, 120, free of isomeric products (although it is possible here, too, to imagine cyclization of the halide prior to alkyla-lion). The hydroxyl is then converted to the bromide (121) by... 

A structurally unrelated agent is tazadolene (40). The synthesis of tazadolene begins with P-keto ester 37 and subsequent enamine formation with 3-amino-1-propanol followed by hydrogenolysis to give 38. This phenylhydroxymethyl compound is then dehydrated with hydrochloride acid to form olefin 39. Treatment with bromine and triphenylphosphine effects cycliza-tion to form the azetidine ring of tazadolene [10]. 

Notable examples of general synthetic procedures in Volume 47 include the synthesis of aromatic aldehydes (from dichloro-methyl methyl ether), aliphatic aldehydes (from alkyl halides and trimethylamine oxide and by oxidation of alcohols using dimethyl sulfoxide, dicyclohexylcarbodiimide, and pyridinum trifluoro-acetate the latter method is particularly useful since the conditions are so mild), carbethoxycycloalkanones (from sodium hydride, diethyl carbonate, and the cycloalkanone), m-dialkylbenzenes (from the />-isomer by isomerization with hydrogen fluoride and boron trifluoride), and the deamination of amines (by conversion to the nitrosoamide and thermolysis to the ester). Other general methods are represented by the synthesis of 1 J-difluoroolefins (from sodium chlorodifluoroacetate, triphenyl phosphine, and an aldehyde or ketone), the nitration of aromatic rings (with ni-tronium tetrafluoroborate), the reductive methylation of aromatic nitro compounds (with formaldehyde and hydrogen), the synthesis of dialkyl ketones (from carboxylic acids and iron powder), and the preparation of 1-substituted cyclopropanols (from the condensation of a 1,3-dichloro-2-propanol derivative and ethyl-... 

Stereoselective Strecker reactions with galactosylamine 1 can also be achieved with sodium cyanide and acetic acid in 2-propanol. The reactions, however, proceed slowly and with a lower stereoselectivity, giving diastereomeric ratios of the products between 3 1 and 7 1. The scope of the method can be extended to other glycosylamines, e.g., 2,3,4-tri-O-pivaloyl-a-D-arabinosyl-amine which allows the stereoselective synthesis of (A )-amino nitriles61,62. 

PROBLEMS Starting with 1-propanol, and using any other reagents of your choice, show how you could use a WilUamson Ether synthesis to make each of the following... 

Total synthesis of (+)-validamycins A and B starting from a common synthetic intermediate was elaborated by the following sequence. Tetra-(9-benzyl-(-l-)-valienamine (370), derived from 211, and the di-O-benzyl derivative (371) of the epoxide were coupled in 2-propanol to produce the protected dicarba compound (374), the structure of which was confirmed by conversion into (-1-)-validoxylamine B nonaacetate. Concurrently, compound 372 was glycosylated and the product oxidized with a peroxy acid, to afford a mixture of products from which the desired epoxide (373) was obtained in 70% yield. Coupling of 370 with 373 in 2-propanol at 120° afforded two carba-trisaccharides, and the major product (47%) was depro-tected and characterized as the dodecaacetate of validamycin B. The pro-... 

An alternative synthesis,by method h, was conducted by coupling 357 and 1,6-anhydro-4-0-(3,4-anhydro-6-deoxy-a-D-galactopyranosyl)-a-D-glucopyranose (392a) in 2-propanol at 120° this yielded a diastereoiso-meric mixture, from which, after the usual treatment, amylostatin (XG) was isolated in 20% yield. 

---