Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Nanoparticles polymers

Rao, J. P. Geckeler, K. E. (2011). Polymer nanoparticles Preparation techniques and size-control parameters. Fh ogress in Polymer Science, Vol. 36, 7, (July 2011), pp. (887-913), ISSN 0079-6700... [Pg.82]

Optical patterning and photochemical fixation of polymer nanoparticles on glass substrates. Appl. Phys. Lett, 78, 2566-2568 Ito, S., Yoshikawa, H. and Masuhara, H. (2002) Laser manipulation and fixation of single gold nanoparticles in solution at room temperature. Appl. Phys. Lett, 80, 482 84. [Pg.168]

Solbrig CM, Saucier-Sawyer JK, Cody V et al (2007) Polymer nanoparticles for immunotherapy from encapsulated tumor-associated antigens and whole tumor cells. Mol Pharm 4 47-57... [Pg.64]

Among those several different types of transducers based on CNTs, the CNT-composite electrode, which was the first CNT electrode tested in 1996, is still widely used with different composite materials such as conducting polymers, nanoparticles, sol-gel, etc. The usefulness of these electrodes is based on their high sensitivity, quick response, good reproducibility, and particularly long-term stability. We expect to see continued research activities using CNT-composite electrodes. [Pg.516]

PCR product [192]. The dye-doped polymer nanoparticles [13], silica nanoparticles [14] and nano-size all-dye aggregates [15] are overviewed in other chapters of this book. [Pg.81]

Frigoli M, Ouadahi K, Larpent C (2009) A cascade FRET-mediated ratiometric sensor for Cu2+ ions based on dual fluorescent ligand-coated polymer nanoparticles. Chemistry 15 8319-30... [Pg.130]

Gouanve F, Schuster T, Allard E, Meallet-Renault R, Larpent C (2007) Fluorescence quenching upon binding of copper ions in dye-doped and ligand-capped polymer nanoparticles a simple way to probe the dye accessibility in nano-sized templates. Adv Funct Mater 17 2746-2756... [Pg.223]

Allard E, Larpent C (2008) Core-shell type dually fluorescent polymer nanoparticles for ratiometric pH-Sensing. J Polym Sci Part A Polym Chem 46 6206-6213... [Pg.224]

Synthesis and Characterisation of Molecularly Imprinted Polymer Nanoparticles for Streptomycin for Use as Solid Phase Extraction Materials... [Pg.102]

Cammas, S., Suzuki, K., Sone, Y, Sakurai, Y., Kataoka, K., and Okano, T. Thermo-responsive polymer nanoparticles with a core-shell micelle structure as site-specific drug carriers. J. Contr. Rel, 1997,48, 157-164. [Pg.48]

Shea and colleagues [109-111] added an exciting contribution to this field They created molecular imprints for the peptide melittin, the main component of bee venom, in polymer nanoparticles, resulting in artificial antibody mimics that can be used for the in vivo capture and neutralization of melittin. Melittin is a peptide comprising 26 amino acids which is toxic because of its cytolytic activity. Shea and colleagues strategy was to synthesize cross-linked, acrylamide-based MIP nanoparticles by a process based on precipitation polymerization using a small amount of surfactant. To maximize the specificity and the affinity for melittin, a number of hydrophilic monomers were screened for complementarity with the template. The imprinted nanoparticles were able to bind selectively the peptide with an apparent dissociation constant of Ax>app > 1 nM [109]. [Pg.24]

Figure 8.8 Schematic diagram showing SECM measurement of lateral (in-plane) and cross-film electron transport properties in multilayer polymer/nanoparticle films.30 (Reprinted with permission from V. Ruiz et al., Nano Lett. 2003, 3, 1459-1462. Copyright 2003 American Chemical Society.)... Figure 8.8 Schematic diagram showing SECM measurement of lateral (in-plane) and cross-film electron transport properties in multilayer polymer/nanoparticle films.30 (Reprinted with permission from V. Ruiz et al., Nano Lett. 2003, 3, 1459-1462. Copyright 2003 American Chemical Society.)...
Electrostatic assembly, which involves attractive forces between two oppositely charged entities (polymers, nanoparticles, and substrates), has been proposed in the pioneering work of Her for the assembly of two- and three-dimensional structures.22 The LbL assembly of charged polyelectrolytes was later reported by Decher et al. for the fabrication of multilayer films of polyelectrolytes.10 23 Their technique is based on the consecutive adsorption of polyanions and polycations from dilute aqueous solutions onto a charged substrate (Fig. 13.2). [Pg.410]

Wolf et al. introduced the self-assembly, transfer, and integration (S ATI) of nanoparticles with high placement accuracy.86 87 Silica and polymer nanoparticles were positioned on a PDMS stamp through convective assembly (Fig. 13.14). By controlling the printing temperature or by using a thin polymer layer as an adhesion layer, nanoparticles of different shapes and sizes were printed onto the target substrate. [Pg.423]

Keywords. Polymer latex, Miniemulsion, Heterophase polymerization, Polymer nanoparticles, Composite particles... [Pg.75]

Nakache E, Poulain N, Candau F, Orecchioni A-M, Irache JM (2000) Biopolymer and polymer nanoparticles and their biomedical application. In Nalwa HS (ed), Handbook of Nanostructured Materials and Nanotechnology. Vol 5 Organics, Polymers, and Biological Materials. New York Academic Press, pp 577-635... [Pg.169]


See other pages where Nanoparticles polymers is mentioned: [Pg.506]    [Pg.508]    [Pg.489]    [Pg.112]    [Pg.22]    [Pg.353]    [Pg.168]    [Pg.220]    [Pg.108]    [Pg.120]    [Pg.126]    [Pg.281]    [Pg.102]    [Pg.57]    [Pg.3]    [Pg.222]    [Pg.128]    [Pg.142]    [Pg.55]    [Pg.358]    [Pg.361]    [Pg.902]    [Pg.209]    [Pg.164]    [Pg.224]    [Pg.7]    [Pg.281]    [Pg.354]    [Pg.28]    [Pg.373]    [Pg.7]   
See also in sourсe #XX -- [ Pg.292 ]

See also in sourсe #XX -- [ Pg.285 , Pg.286 , Pg.287 ]

See also in sourсe #XX -- [ Pg.52 ]




SEARCH



Nanoparticle polymer nanoparticles

© 2024 chempedia.info