Polymer matrix diffusion-controlled

Polymer matrix diffusion-controlled drug delivery systems. 

Polymer Matrix Diffusion-Controlled Drug Delivery Systems... 

Matrix diffusion-controlled system in which the drug is homogeneously dispersed in a hydrophilic polymer diffusion from the matrix controls release rate Nitrodur (nitroglycerin key). 

In an optimal release system, the rate of release is primarily determined by the design of the device itself, which is typically a polymer structure (Wise, 2000). A dmg can diffuse through the pores of the polymer system or by passing between the polymer chains. In a pure diffusion-controlled release system, there is no change occurring in the polymer itself. In matrix diffusion-controlled systems, the dmg can be either dissolved or dispersed throughout the polymer network, while reservoir diffusion-controlled... 

Details are given of pilocarpine trapped in a matrix diffusion-controlled drug delivery system using hydrophilic inserts of polyhydroxyethyl methacrylate. The physical and chemical properties of pilocarpine were investigated to determine the mechanism of drug-polymer interaction and the effect of drug release behaviour of controlled release polymeric devices. 22 refs. 

First, in composites with high fiber concentrations, there is little matrix in the system that is not near a fiber surface. Inasmuch as polymerization processes are influenced by the diffusion of free radicals from initiators and from reactive sites, and because free radicals can be deactivated when they are intercepted at solid boundaries, the high interfacial area of a prepolymerized composite represents a radically different environment from a conventional bulk polymerization reactor, where solid boundaries are few and very distant from the regions in which most of the polymerization takes place. The polymer molecular weight distribution and cross-link density produced under such diffusion-controlled conditions will differ appreciably from those in bulk polymerizations. 

The rate of drug release (E) from the eroding matrix is controlled by (a) the chemical properties of the system - the hydrolytic and the neutralizing process at the boundary of the device, catalytic degradation of the polymer and the intrinsic backbone reactivity, and (b) several concomitant physical processes such as water diffusivity, water solubility, water partitioning, etc. 

Erosion is typically characterized by either occurring on the surface or in the bulk. Surface erosion is controlled by the chemical reaction and/or dissolution kinetics, while bulk erosion is controlled by diffusion and transport processes such as polymer swelling, diffusion of water through the polymer matrix, and the diffusion of degradation products from the swollen polymer matrix. The processes of surface and bulk erosion are compared schematically in Fig. 1. These two processes are idealized descriptions. In real systems, the tendency towards surface versus bulk erosion behavior is a function of the particular chemistry and device geometry (Tamada and Langer, 1993). Surface erosion may permit the... 

Diffusion of particles in the polymer matrix occurs much more slowly than in liquids. Since the rate constant of a diffusionally controlled bimolecular reaction depends on the viscosity, the rate constants of such reactions depend on the molecular mobility of a polymer matrix (see monographs [1-4]). These rapid reactions occur in the polymer matrix much more slowly than in the liquid. For example, recombination and disproportionation reactions of free radicals occur rapidly, and their rate is limited by the rate of the reactant encounter. The reaction with sufficient activation energy is not limited by diffusion. Hence, one can expect that the rate constant of such a reaction will be the same in the liquid and solid polymer matrix. Indeed, the process of a bimolecular reaction in the liquid or solid phase occurs in accordance with the following general scheme [4,5] ... 

A nonionic, non-volatile photoactive acid generator, 2,6-dinitrobenzyl tosylate has been recently reported and shown to be effective in chemically amplified resist systems (10). This ester is a nonionic compound that has a much wider range of solubility in matrix polymers and does not contain undesirable inorganic elements. While it is known to exhibit a lower sensitivity to irradiation than the onium salt materials, many structural variations can be produced to precisely vary the acid properties of the molecule and to control the diffusion of the AG in the polymer matrix (11). 

The requirements for solid-phase synthesis are diverse. The support must be insoluble, in the form of beads of sufficient size to allow quick removal of solvent by filtration, and stable to agitation and inert to all the chemistry and solvents employed. For continuous-flow systems, the beads also must be noncompressible. Reactions with functional groups on beads imply reaction on the inside of the beads as well as on the surface. Thus, it is imperative that there be easy diffusion of reagents inside the swollen beads and that the reaction sites be accessible. Accessibility is facilitated by a polymer matrix that is not dense and not highly functionalized. A matrix of defined constitution allows for better control of the chemistry. Easier reaction is favored by a spacer that separates the matrix from the reaction sites. Coupling requires an environment of intermediate polarity such as that provided by dichloromethane or dimethylformamide benzene is unsuitable as solvent. 

The mode of action of the antifouling polymers thus conforms to the bulk abiotic bond cleavage model. All the controlling factors, viz., diffusion of water into the polymer matrix, hydrolysis of the tributyltin carboxylate, diffusion of tributyltin species from the matrix to the surface, phase transfer of the organotin species, and its migration across the boundary layer, are analyzed. It is found that the transport of the mobile tributyltin species in the matrix is the rate limiting factor. 

An NIR optical fiber for the detection of metal ions has been developed In a controlled environment, the optical probe with immobilized NIR dye was immersed in vials containing different metal ions varying in concentrations from 10 9 to 1CT2 M. The probe response was obtained by the diffusion of the metal ions through the poly(2-hydroxyethyl methacrylate) (PHEMA) polymer matrix where the dye was covalently attached. On complexation of the metal with the dye, the intensity of the fluorescence signal increased. 

Other than in polymer matrix composites, the chemical reaction between elements of constituents takes place in different ways. Reaction occurs to form a new compound(s) at the interface region in MMCs, particularly those manufactured by a molten metal infiltration process. Reaction involves transfer of atoms from one or both of the constituents to the reaction site near the interface and these transfer processes are diffusion controlled. Depending on the composite constituents, the atoms of the fiber surface diffuse through the reaction site, (for example, in the boron fiber-titanium matrix system, this causes a significant volume contraction due to void formation in the center of the fiber or at the fiber-compound interface (Blackburn et al., 1966)), or the matrix atoms diffuse through the reaction product. Continued reaction to form a new compound at the interface region is generally harmful to the mechanical properties of composites. 

---