Polymers, chloromethylated

Manatt SL, Horowitz D, Horowitz R, Pimnell RP, Solvent swelling for enhancement of carbon-13 nuclear magnetic resonance spectral information from insoluble polymers chloromethylation levels in crosslinked, Anal. Chem., 52 1529-1532, 1980. 

Synonyms Bisphenol A, (chloromethyl) oxirane polymer Bisphenol A, epichlorohydrin polymer (Chloromethyl) oxirane, 4,4 -(1-methylethyl-idene) bisphenol copolymer Epoxy resin Epoxy resin ERL-2795 4,4-Isopropylidenediphenol-epichlorohydrin epoxy resin 4,4 -lsopropyli-denediphenol, polymer with 1-chloro-2,3-epo) propane Phenol, 4,4 -isopropylidenedi-, dimer with 1 -chloro-2,3-epo) propane Phenol, 4,4 -isopropylidenedi-, polymer with 1-chloro-2,3-epoxypropane Phenol, 4,4 -(1-methylethylidene) bis-, polymer with (chloromethyl) oxirane CiassiTicatbn Polymer... 

NFPA Health 3, Flammability 3, Reactivity 2 Uses Intermediate in prep, of chloromethyl derive, which are subsequently converted to amine compds. for use as ion exchange resins, water repellents, and other industrial polymers chloromethylation reagent ion exhange membrane in prod, of grapefruit juice protective agent... 

Acyl Chlorides. When acyl chlorides are reacted with formaldehyde polymers, chloromethyl esters are obtained. According to Descud , cUoromethyl acetate is the principal product formed by the exothermic... 

To illustrate the specific operations involved, the scheme below shows the first steps and the final detachment reaction of a peptide synthesis starting from the carboxyl terminal. N-Boc-glycine is attached to chloromethylated styrene-divinylbenzene copolymer resin. This polymer swells in organic solvents but is completely insoluble. ) Treatment with HCl in acetic acid removes the fert-butoxycarbonyl (Boc) group as isobutene and carbon dioxide. The resulting amine hydrochloride is neutralized with triethylamine in DMF. 

The actual process of solid phase peptide synthesis outlined m Figure 27 15 begins with the attachment of the C terminal ammo acid to the chloromethylated polymer m step 1 Nucleophilic substitution by the carboxylate anion of an N Boc protected C terminal... 

Platinum-group metals (qv) form complexes with chelating polymers with various 8-mercaptoquinoline [491-33-8] derivatives (83) (see Chelating agents). Hydroxy-substituted quinolines have been incorporated in phenol—formaldehyde resins (84). Stannic chloride catalyzes the condensation of bis(chloromethyl)benzene with quinoline (85). 

Epichlorohydrin. Commercial polyester elastomers include both the homopolymer and the copolymer of epichl orohydrin with ethylene oxide. The very polar chloromethyl groups create basic resistance to oil for these polymers, and they have been extensively used in fuel lines however, the desire for lower fuel permeation is causing a search to be made for other polymers (10) (see Elastomers, synthetic-polyethers). 

Oxetane, 2-(o -chlorobenzyl)-2-phenyl-X-ray crystal structure, 7, 366 Oxetane, 3-chloromethyl-3-ethyl-ring strain, 7, 370-371 Oxetane, 2-(o-chlorophenyl)- H NMR, 7, 367 Oxetane, 2-cyano-synthesis, 7, 391-392 Oxetane, 2-cyano-3,3-dimethyl-2-phenyl-thermolysis, 7, 372 Oxetane, 2,2-dialkoxy-synthesis, 7, 396 Oxetane, 2,2-dialkyl-isomerization, 7, 377 Oxetane, 3,3-dialkyl-alkylative cleavage, 7, 381 polymers, 7, 382 Oxetane, 2-diethylamino-synthesis, 7, 390 Oxetane, 3,3-difluoro-molecular dimensions, 7, 365 Oxetane, 2,2-dimethyl-mass spectra, 7, 368-369 photolysis, 7, 373 synthesis, 7, 393 Oxetane, 2,3-dimethyl- H NMR, 7, 366 thermolysis, 7, 372 Oxetane, 2,4-dimethyl-mass spectrum, 7, 369... 

The first, and still widely used, polymer-supported ester is formed from an amino acid and a chloromethylated copolymer of styrene-divinylbenzene. Originally it was cleaved by basic hydrolysis (2 N NaOH, FtOH, 25°, 1 h). Subsequently, it has been cleaved by hydrogenolysis (H2/Pd-C, DMF, 40°, 60 psi, 24 h, 71% yield), and by HF, which concurrently removes many amine protective groups. Monoesterification of a symmetrical dicarboxylic acid chloride can be effected by reaction with a hydroxymethyl copolymer of styrene-divinylbenzene to give an ester a mono salt of a diacid was converted into a dibenzyl polymer. ... 

Reinhoudt, Gray, Smit and Veenstra prepared a number of monomer and dimer crowns based on a variety of substituted xylylene units. They first conducted the reaction of 1,2-dibromomethylbenzene and a polyethylene glycol with sodium hydride or potassium Z-butoxide in toluene solution. Mixtures of the 1 1 and 2 2 (monomer and dimer) products were isolated and some polymer was formed . The reaction was conducted at temperatures from 30—60° and appeared to be complete in a maximum of one hour. The authors noted that the highest yield of 1 1 cyclic product was obtained with disodium tetraethylene glycolate instead of dipotassium hexaethylene gly-colate (see also Chap. 2) . Chloromethylation of 1,3-benzodioxole followed by reaction with disodium tetraethylene glycolate afforded the macrocycle (29% yield) illustrated in Eq. (3.20). 

The six-position may be functionalized by electrophilic aromatic substitution. Either bromination (Br2/CH2Cl2/-5°) acetylation (acetyl chloride, aluminum chloride, nitrobenzene) " or chloromethylation (chloromethyl methyl ether, stannic chloride, -60°) " affords the 6,6 -disubstituted product. It should also be noted that treatment of the acetyl derivative with KOBr in THF affords the carboxylic acid in 84% yield. The brominated crown may then be metallated (n-BuLi) and treated with an electrophile to form a chain-extender. To this end, Cram has utilized both ethylene oxide " and dichlorodimethyl-silane in the conversion of bis-binaphthyl crowns into polymer-bound resolving agents. The acetylation/oxidation sequence is illustrated in Eq. (3.54). 

A typical system is a chlorome thy late d polystyrene resin cross-linked with 2 or 4% p-divinylbenzene and different amounts of chloromethylated sites (0.7—3.7 mequiv. of Cl per g of polymer) . The reaction is shown schematically in Eq. (6.19) and additional information may be found in Sects. 8.3 and 8.8. 

Warshawsky and coworkers have recently reported the synthesis of a class of compounds which they call polymeric pseudocrown ethers . A chloromethylated polystyrene matrix is used here as in 6.6.2, but instead of adding a crown to the backbone, a strand of ethyleneoxy units is allowed to react at two different positions on the chain, thus forming a crown. Such systems must necessarily be statistical, and the possibility exists for forming interchain bridges as well as intrachain species. Nevertheless, polymers which could be successfully characterized in a variety of ways were formed. A schematic representation of such structures is illustrated below as compound 30. ... 

A functional group is introduced to the polystyrene 10 by chloromethylation Blanc reaction) in order to allow for reaction with the substrate 11. The polymer-bound diester is then treated with base to initiate the Dieckmann condensation. 

Chemical Name N-(2-aminoethyl)-1,2-ethanediamine polymer with (chloromethyl)oxirane Common Name —... 

A polymer-bound analog of the p-sulfonato-calix[6]arenes is described in a Shinkai patent [31,32], which states that the hexakis(carbetoxymethyl)ether of p-sulfonatocalix[6]arene was partially nitrated, ami-nated, and fixed on crosslinked chloromethylated polystyrene. This resin is stated to absorb 108 ixg of uranium... 

Recently, Deligoz and Yilmaz [51] prepared three polymeric calix[4]arenes, which were synthesized by reacting chloromethylated polystyrene with 25,26,27-tribenzoyloxy-28-hydroxy calix[4]arene (2a, 3a) and po-lyacryloyl chloride with 25,26,27,28-tetraacetoxy ca-lix[4]arene (4a). After alkaline hydrolysis of the polymers, they were utilized for selective extraction of transition metal cations from aqueous phase to organic phase. 

The polymer-bound catalysts A-C. (Table 31) are prepared by reaction of the corresponding amino alcohols with partially chloromethylated 1 -2% cross-linked polystyrene. In the case of A, the enantioselectivity of the addition of dialkylzincs to aldehydes is higher than with the corresponding monomeric ephedrine derivatives (vide supra). Interesting insights into the mechanism of the alkylation of aldehydes by dialkylzinc reagents can be obtained from the experi-... 

The checkers used beads of chloromethylated polymer available from Bio. Rad. Laboratories, Richmond, California (Bio Beads S-X2). Chlorine analysis (Note 3) showed that the resin contained 1.06 milli-equivalents of chlorine per gram, as specified by the manufacturer. 

Chemistry (Continued) polyimide, 287-300 polyurethane, 222-236, 546 transition metal coupling, 483-490 Chiral conjugated polymers, 479-480 Chlorinated solvents, 91 Chlorofluorocarbons (CFCs), 201, 205 Chloroformate endgroups, 87 Chloromethylation, 354 Church, A. Cameron, 431 Circular dichroism, 490 Classical catalysts, 433 Clean Air Act of 1990, 201, 205 Clearcoat, 240... 

Anionic grafting methods (vide infra) can be applied to the synthesis of comb-shaped polymers. As an example, a polystyrene backbone is partially chloromethylated (under mild conditions) and used as an electrophilic deactivator for a living polystyrene 89). The grafting onto process yields well defined species that have been characterized accurately. The branches are distributed randomly along the backbone 90). 

The same procedure can be employed to make well defined comb-like polymers Living polystyrene can be grafted onto a partially chloromethylated polystyrene89 146), or onto a random copolymer of styrene and methyl methacrylate containing less than 10% of the latter monomer I48). 

---