Polyethylene relaxation

The y relaxation takes place at the lowest temperature, overlaps with the )3 relaxation (Fig. 15), and coincides in location and activation energy with the typical y relaxation of polyethylene [35,36], and also of polyethers [37], and polyesters [38] with three or more consecutive methylene units. It appears, for 3 Hz and tan6 basis, at - 120°C (P7MB) and - 126°C (P8MB), and its location and activation energy (35-45 kJ mol ) agree with the values of a similar relaxation associated with kink motions of polymethylenic sequences. 

Dielectric relaxation measurements of polyethylene grafted with acrylic acid(AA), 2-hydroxyethyl methacrylate (HEMA) and their binary mixture were carried out in a trial to explore the molecular dynamics of the grafted samples [125]. Such measurements provide information about their molecular packing and interaction. It was possible to predict that the binary mixture used yields a random copolymer PE—g—P(AA/HEMA), which is greatly enriched with HEMA. This method of characterization is very interesting and is going to be developed in different polymer/monomer systems. 

We are now going to compare the results of mode analysis with measurements of viscosity on polyethylene melts. With the aid of Eq. (30), which links the viscosity to the relaxation times, we can predict the viscosity using the results of spin-echo measurements and compare it with the viscosity measurement... 

In very few cases solid-state NMR has been used to determine molecular weights for polyethylene [99]. In general solid-state NMR is not so suitable due to the long relaxation times of the end groups, which lead to long measurement times. The strength of NMR is in chemical structure characterization and also the possibility to determine the chain branching, tacticity or to obtain further details of the microstructure. 

Extended chain crystal (ECC) Folded chain crystal (FCC) Growth Growth rate Induction period Melt relaxation Molecular weight Nucleation Nucleation rate Nucleus Optical microscope (OM) Polyethylene Polymer Power law ... 

Stress relaxation Polypropylene, high- and low-density polyethylene... 

Relaxation in Polyethylene A Molecular Dynamics Simulation Study. 

A similar continuity in the Tj s through the melting temperature was previously reported for linear polyethylene. (17) We have now investigated the temperature dependence of this quantity, for this polymer, in more detail and have also studied a low density (branched) polyethylene. The results for the poly-ethylenes are summarized in Fig. 8. The new data reported here substantiate the conclusion previously reached for linear polyethylene. A similar conclusion can now be reached for the baclc-bone carbons of low density (branched) polyethylene. The melting temperature for this particular sample, under the crystallization conditions studied, is less than 110°C. (33) Thus, the spin-lattice relaxation parameters for the bac)cbone carbons are the same for both the linear and branched polymers over the temperature range studied here. Changes that occur in Tq as the temperature is reduced below 0°C involve other considerations and will be discussed in detail elsewhere. (22)... 

---