Polyethylene butadiene

Annis B K, Noid D W, Sumpter B G, Reffner J R and Wunderlich B 1992 Application of atomic force microscopy (AFM) to a block copolymer and an extended chain polyethylene Makromol. Chem., Rapid. Commun. 13 169 Annis B K, Schwark D W, Reffner J R, Thomas E L and Wunderlich B 1992 Determination of surface morphology of diblock copolymers of styrene and butadiene by atomic force microscopy Makromol. Chem. 193 2589... 

Acryhc stmctural adhesives have been modified by elastomers in order to obtain a phase-separated, toughened system. A significant contribution in this technology has been made in which acryhc adhesives were modified by the addition of chlorosulfonated polyethylene to obtain a phase-separated stmctural adhesive (11). Such adhesives also contain methyl methacrylate, glacial methacrylic acid, and cross-linkers such as ethylene glycol dimethacrylate [97-90-5]. The polymerization initiation system, which includes cumene hydroperoxide, N,1S7-dimethyl- -toluidine, and saccharin, can be apphed to the adherend surface as a primer, or it can be formulated as the second part of a two-part adhesive. Modification of cyanoacrylates using elastomers has also been attempted copolymers of acrylonitrile, butadiene, and styrene ethylene copolymers with methylacrylate or copolymers of methacrylates with butadiene and styrene have been used. However, because of the extreme reactivity of the monomer, modification of cyanoacrylate adhesives is very difficult and material purity is essential in order to be able to modify the cyanoacrylate without causing premature reaction. 

Organic peroxides are used in the polymer industry as thermal sources of free radicals. They are used primarily to initiate the polymerisation and copolymerisation of vinyl and diene monomers, eg, ethylene, vinyl chloride, styrene, acryUc acid and esters, methacrylic acid and esters, vinyl acetate, acrylonitrile, and butadiene (see Initiators). They ate also used to cute or cross-link resins, eg, unsaturated polyester—styrene blends, thermoplastics such as polyethylene, elastomers such as ethylene—propylene copolymers and terpolymers and ethylene—vinyl acetate copolymer, and mbbets such as siUcone mbbet and styrene-butadiene mbbet. 

Over 70% of the total volume of thermoplastics is accounted for by the commodity resins polyethylene, polypropylene, polystyrene, and poly(vinyl chloride) (PVC) (1) (see Olefin polymers Styrene plastics Vinyl polymers). They are made in a variety of grades and because of their low cost are the first choice for a variety of appHcations. Next in performance and in cost are acryhcs, ceUulosics, and acrylonitrile—butadiene—styrene (ABS) terpolymers (see... 

Fig. 10. Preparation and morphology of toughened PVC (a) secondary PVC grain (50—250 flm) (b) modified PVC with coherent primary grain (ca 1 -lm) (220). CPE = chlorinated polyethylene EVA = ethylene—vinyl acetate copolymers ABS = acrylonitrile—butadiene—styrene MBS = methyl...

Natural mbber comes generally from southeast Asia. Synthetic mbbers are produced from monomers obtained from the cracking and refining of petroleum (qv). The most common monomers are styrene, butadiene, isobutylene, isoprene, ethylene, propylene, and acrylonitrile. There are numerous others for specialty elastomers which include acryUcs, chlorosulfonated polyethylene, chlorinated polyethylene, epichlorohydrin, ethylene—acryUc, ethylene octene mbber, ethylene—propylene mbber, fluoroelastomers, polynorbomene, polysulftdes, siUcone, thermoplastic elastomers, urethanes, and ethylene—vinyl acetate. 

NR = natural mbbei SBR = styiene—butadiene mbbei EPDM = ethylene—piopjiene—diene monomer CSM = chlorosulfonated polyethylene and PE = polyethylene. 

Copolymers with acrylonitrile, butadiene, isoprene, acrylates, piperjiene, styrene, and polyethylene have been studied. The high cost of sorbic acid as a monomer has prevented large-scale uses. The abiUty of sorbic acid to polymerize, particularly on metallic surfaces, has been used to explain its corrosion inhibition for steel, iron, and nickel (14). 

Styrene—butadiene elastomers, emulsion and solution types combined, are reported to be the largest-volume synthetic mbber, with 28.7% of the world consumption of all synthetic mbber in 1994 (38). This percentage has decreased steadily since 1973 when SBR s market share was 57% (39). The decline has been attributed to the switch to radial tires (longer milage) and the growth of other synthetic polymers, such as polyethylene, polypropylene, polyester, and polystyrene. Since 1985, production of SBR has been flat (Table 3). 

LDPE = low density polyethylene LLDPE = linear low density polyethylene HDPE = high density polyethylene PP = polypropylene PVC = polyvinyl chloride PS = polystyrene ABS = polyacrylonitrile-butadiene-styrene. 

Polymerization processes are characterized by extremes. Industrial products are mixtures with molecular weights of lO" to 10. In a particular polymerization of styrene the viscosity increased by a fac tor of lO " as conversion went from 0 to 60 percent. The adiabatic reaction temperature for complete polymerization of ethylene is 1,800 K (3,240 R). Heat transfer coefficients in stirred tanks with high viscosities can be as low as 25 W/(m °C) (16.2 Btu/[h fH °F]). Reaction times for butadiene-styrene rubbers are 8 to 12 h polyethylene molecules continue to grow lor 30 min whereas ethyl acrylate in 20% emulsion reacts in less than 1 min, so monomer must be added gradually to keep the temperature within hmits. Initiators of the chain reactions have concentration of 10" g mol/L so they are highly sensitive to poisons and impurities. 

The important thermoplastics used commercially are polyethylene, acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), cellulose acetate butyrate (CAB), vinylidene chloride (Saran), fluorocarbons (Teflon, Halar, Kel-F, Kynar), polycarbonates, polypropylene, nylons, and acetals (Delrin). Important thermosetting plasttcs are... 

Many of the most floppy polymers have half-melted in this way at room temperature. The temperature at which this happens is called the glass temperature, Tq, for the polymer. Some polymers, which have no cross-links, melt completely at temperatures above T, becoming viscous liquids. Others, containing cross-links, become leathery (like PVC) or rubbery (as polystyrene butadiene does). Some typical values for Tg are polymethylmethacrylate (PMMA, or perspex), 100°C polystyrene (PS), 90°C polyethylene (low-density form), -20°C natural rubber, -40°C. To summarise, above Tc. the polymer is leathery, rubbery or molten below, it is a true solid with a modulus of at least 2GNm . This behaviour is shown in Fig. 6.2 which also shows how the stiffness of polymers increases as the covalent cross-link density increases, towards the value for diamond (which is simply a polymer with 100% of its bonds cross-linked. Fig. 4.7). Stiff polymers, then, are possible the stiffest now available have moduli comparable with that of aluminium. 

At one time butadiene-acrylonitrile copolymers (nitrile rubbers) were the most important impact modifiers. Today they have been largely replaced by acrylonitrile-butadiene-styrene (ABS) graft terpolymers, methacrylate-buta-diene-styrene (MBS) terpolymers, chlorinated polyethylene, EVA-PVC graft polymers and some poly acrylates. 

When many moleeules eombine the maeromoleeule is termed a polymer. Polymerization ean be initiated by ionie or free-radieal meehanisms to produee moleeules of very high moleeular weight. Examples are the formation of PVC (polyvinyl ehloride) from vinyl ehloride (the monomer), polyethylene from ethylene, or SBR synthetie rubber from styrene and butadiene. 

Papirer et al. used ATR, XPS, and SIMS to determine the effect of flame treatment on adhesion of polyethylene and polypropylene to styrene/butadiene (SBR) rubber [8]. Each flame treatment consisted of a 75-ms pass over a circular burner. The distance between the upper flame front and the polymer was kept fixed al 8 mm. A band was observed near 1720 cm" in the ATR spectra and assigned to carbonyl groups this band increased in intensity as the number of flame... 

Other additives. Amorphous polypropylene, waxes and asphalt can be added to decrease the cost of BR formulations. On the other hand, PIB can be blended with NR, styrene-butadiene rubber, EVA and low molecular weight polyethylene to impart specific properties. 

Unlike polyethylene and other simple aikene polymers, natural rubber is a polymer of a diene, isoprene (2-methyl-l,3-butadiene). The polymerization takes place by addition of isoprene monomer units to the growing chain, leading to formation of a polymer that still contains double bonds spaced regularly at four-carbon intervals. As the following structure shows, these double bonds have Z stereochemistry ... 

Processability Styrene-acrylonitrile, methacrylate-butadiene-styrene, chlorinated polyethylene, PVC-ethyl acrylate, ethylene-vinyl acetate, chlorinated polyoxymethylenes (acetals)... 

In this contribution, in order to illustrate tlie importance of shake-up bands for extended systems, we simulate and compare on correlated grounds the ionization spectra of polyethylene and poly acetylene, the most simplest systems one can consider to represent insulating or semi-conducting polymers. Conclusions for the infinite stereoregular chains are drawn by exU apolation of the trends observed with the first terms of the related n-alkane or acene series, CnH2n+2 and CnHn+2. respectively, with n=2, 4, 6 and 8. Our simulations are also compared to X-ray photoionization spectra (7) recorded on gas phase samples of ethylene, butadiene and hexatriene, which provide a clear experimental manisfestation of the construction of correlation bands (8-12). 

This comprehensive article supplies details of a new catalytic process for the degradation of municipal waste plastics in a glass reactor. The degradation of plastics was carried out at atmospheric pressure and 410 degrees C in batch and continuous feed operation. The waste plastics and simulated mixed plastics are composed of polyethylene, polypropylene, polystyrene, polyvinyl chloride, acrylonitrile butadiene styrene, and polyethylene terephthalate. In the study, the degradation rate and yield of fuel oil recovery promoted by the use of silica alumina catalysts are compared with the non-catalytic thermal degradation. 9 refs. lAPAN... 

De Sarkar M., De P.P., and Bhowmick A.K., New polymeric blends from hydrogenated styrene-butadiene rubber and polyethylene. Polymer, 39, 1201, 1998. 

Frenkel R., Duchacek V., Kirillova T., and Kuz min E. Thermodynamic and structural properties of acrylonitrile butadiene rubber/polyethylene blends, J. Appl. Polym. Sci., 34, 1301, 1987. 

Pandey et al. have used ultrasonic velocity measurement to study compatibility of EPDM and acrylonitrile-butadiene rubber (NBR) blends at various blend ratios and in the presence of compa-tibilizers, namely chloro-sulfonated polyethylene (CSM) and chlorinated polyethylene (CM) [22]. They used an ultrasonic interferometer to measure sound velocity in solutions of the mbbers and then-blends. A plot of ultrasonic velocity versus composition of the blends is given in Eigure 11.1. Whereas the solution of the neat blends exhibits a wavy curve (with rise and fall), the curves for blends with compatibihzers (CSM and CM) are hnear. They resemble the curves for free energy change versus composition, where sinusoidal curves in the middle represent immiscibility and upper and lower curves stand for miscibihty. Similar curves are obtained for solutions containing 2 and 5 wt% of the blends. These results were confirmed by measurements with atomic force microscopy (AEM) and dynamic mechanical analysis as shown in Eigures 11.2 and 11.3. Substantial earher work on binary and ternary blends, particularly using EPDM and nitrile mbber, has been reported. 

FIGURE 11,1 Ultrasonic velocity versus acrylonitrile-butadiene mbber/ethylene-propylene-diene monomer (NBR-EPDM) blend composition (a) no compatibiUzer, (b) with chloro-sulfonated polyethylene (CSM), and (c) with chlorinated polyethylene (CM). (From Pandey, K.N., Setua, D.K., and Mathur, G.N., Polym. Eng. Set, 45, 1265, 2005.)... 

---