Polyamides physical

In the area of moleculady designed hot-melt adhesives, the most widely used resins are the polyamides (qv), formed upon reaction of a diamine and a dimer acid. Dimer acids (qv) are obtained from the Diels-Alder reaction of unsaturated fatty acids. Linoleic acid is an example. Judicious selection of diamine and diacid leads to a wide range of adhesive properties. Typical shear characteristics are in the range of thousands of kilopascals and are dependent upon temperature. Although hot-melt adhesives normally become quite brittle below the glass-transition temperature, these materials can often attain physical properties that approach those of a stmctural adhesive. These properties severely degrade as the material becomes Hquid above the melt temperature. 

Nylon-6,6 [32131 -17-2J is a tough, translucent white, semiciystalline, high melting (T , = 265 C) material. The common physical properties ate shown in Table 9, and principal producers woddwide in Table 10, for nylon-6,6 and other commercial polyamides. 

Table 9. Physical Constants of Commercial Aliphatic Polyamide Homopolymers ...

Nylon-6,6 and nylon-6 have competed successfully ia the marketplace siace their respective commercial iatroductioas ia 1939 and 1941, and ia the 1990s share, about equally, 90% of the total polyamide market. Their chemical and physical properties are almost identical, as the similarity of their chemical stmcture might suggest the amide functions are oriented ia the same directioa aloag the polymer chain for ayloa-6, but are altematiag ia directioa for ayloa-6,6. 

Cycloahphatic diamines which have reacted with diacids to form polyamides generate performance polymers whose physical properties are dependent on the diamine geometric isomers. (58,74). Proprietary transparent thermoplastic polyadipamides have been optimized by selecting the proper mixtures of PDCHA geometric isomers (32—34) for incorporation (75) ... 

Another significant end-use for polyamines is in preparation of paper wet-strength resins. These are polyamide, modified formaldehyde, and polyamine resins used to improve the physical strength of tissue, toweling, and packaging paper products. The cationic formaldehyde resins include both urea—formaldehyde and melamine—formaldehyde types (248,249). Cationic functionaHty is imparted by incorporation of DETA, TETA, and/or TEPA in... 

Nearly all of the polymers produced by step-growth polymerization contain heteroatoms and/or aromatic rings in the backbone. One exception is polymers produced from acyclic diene metathesis (ADMET) polymerization.22 Hydrocarbon polymers with carbon-carbon double bonds are readily produced using ADMET polymerization techniques. Polyesters, polycarbonates, polyamides, and polyurethanes can be produced from aliphatic monomers with appropriate functional groups (Fig. 1.1). In these aliphatic polymers, the concentration of the linking groups (ester, carbonate, amide, or urethane) in the backbone greatly influences the physical properties. 

Siloxane containing interpenetrating networks (IPN) have also been synthesized and some properties were reported 59,354 356>. However, they have not received much attention. Preparation and characterization of IPNs based on PDMS-polystyrene 354), PDMS-poly(methyl methacrylate) 354), polysiloxane-epoxy systems 355) and PDMS-polyurethane 356) were described. These materials all displayed two-phase morphologies, but only minor improvements were obtained over the physical and mechanical properties of the parent materials. This may be due to the difficulties encountered in controlling the structure and morphology of these IPN systems. Siloxane modified polyamide, polyester, polyolefin and various polyurethane based IPN materials are commercially available 59). Incorporation of siloxanes into these systems was reported to increase the hydrolytic stability, surface release, electrical properties of the base polymers and also to reduce the surface wear and friction due to the lubricating action of PDMS chains 59). 

Clays have long been used as fillers in polymer systems because of low cost and the improved mechanical properties of the resulting polymer composites. If all other parameters are equal, the efficiency of a filler to improve the physical and mechanical properties of a polymer system is sensitive to its degree of dispersion in the polymer matrix (Krishnamoorti et ah, 1996). In the early 1990s, Toyota researchers (Okada et ah, 1990) discovered that treatment of montmorillonite (MMT) with amino acids allowed dispersion of the individual 1 nm thick silicate layers of the clay scale in polyamide on a molecular. Their hybrid material showed major improvements in physical and mechanical properties even at very low clay content (1.6 vol %). Since then, many researchers have performed investigations in the new field of polymer nano-composites. This has lead to further developments in the range of materials and synthesizing methods available. 

Diamantane-based polymers are synthesized to take advantage of their stiffness, chemical and thermal stability, high glass transition temperature, improved solubility in organic solvents, and retention of their physical properties at high temperatures. All these special properties result from their diamantane-based molecular structure [90]. Polyamides are high-temperature polymers with a broad range of applications in different scientific and industrial fields. However, their process is very difficult because of poor solubility and lack of adequate thermal stability retention [90]. Incorporation of 1,6- or... 

The amide functionality plays an important role in the physical and chemical properties of proteins and peptides, especially in their ability to be involved in the photoinduced electron transfer process. Polyamides and proteins are known to take part in the biological electron transport mechanism for oxidation-reduction and photosynthesis processes. Therefore studies of the photochemistry of proteins or peptides are very important. Irradiation (at 254 nm) of the simplest dipeptide, glycylglycine, in aqueous solution affords carbon dioxide, ammonia and acetamide in relatively high yields and quantum yield (0.44)202 (equation 147). The reaction mechanism is thought to involve an electron transfer process. The isolation of intermediates such as IV-hydroxymethylacetamide and 7V-glycylglycyl-methyl acetamide confirmed the electron-transfer initiated free radical processes203 (equation 148). 

We have prepared a synthetic protein polymer based on repeat sequence Lys-25 to investigate the effect of uniformity of crosslink placement on the physical properties of a polymer hydrogel (Figure 1). The design of Lys-25 reflects two essential structural requirements for formation of polymer hydrogels (1) a flexible, hydrated (polyamide) backbone and... 

The materials used in nonwoven fabrics include a single polyolefin, or a combination of polyolefins, such as polyethylene (PE), polypropylene (PP), polyamide (PA), poly(tetrafluoroethylene) (PTFE), polyvinylidine fluoride (PVdF), and poly(vinyl chloride) (PVC). Nonwoven fabrics have not, however, been able to compete with microporous films in lithium-ion cells. This is most probably because of the inadequate pore structure and difficulty in making thin (<25 /rm) nonwoven fabrics with acceptable physical properties. 

As indicated in Table I, most properties of polyamide derivatives of BA, nylons 13, and 13/13, are predictable from properties of commercial engineering plastics such as nylon-11 and nylon-6/10 -- the BA based nylons are have lower moduli and most physical properties are unexceptional.[9,10] However, the BA based nylons have one exceptional property -- their very low capacity to absorb moisture. This property suggests that these materials may be less affected by water plasticization than other nylons, and it has attracted interest in developing BA-based nylons commercially. Development has been impeded by the fact that BA is not produced on a sufficient scale to make it cost-competitive, and apparently the attractive markets are not large enough to justify investment in development of BA processes, creating a chicken-or-egg" problem. 

High-impact polystyrene (HIPS) is produced by polymerizing styrene in the presence of a rubber, usually poly(l,3-butadiene). HIPS has improved impact resistance compared to polystyrene and competes with ABS products at low-cost end applications such as fast-food cups, lids, takeout containers, toys, kitchen appliances, and personal-care product containers. HIPS as well as ABS and SMA are used in physical blends with other polymers, such as polycarbonates, polyesters, and polyamides, to improve impact resistance (Sec. 2-13c-3). 

Sufficiently concentrated polyamide solutions as needed for physical measurements (e.g., viscosimetry, opytical tests) must be prepared in two steps At first, synthesis of the polyamide by use of precipitation polymerization and secondly, dissolving the carefully washed and dried polymer in concentrated sulfuric acid. 

---