Poly silane synthesis

Koe J (2008) Contemporary poly silane synthesis and functionalisation. Polym Int 58(3) 255-260... 

The first step for the synthesis of a melt spinnable polysilane is the alkoxylation and distillation of the residue (Figure 1). 1,2-dimethyltetramethoxydisilane and 1,1,2-trimethyltrimethoxydisilane are mixed in a special ratio and a poly silane will be obtained by a catalytic redistribution reaction. Catalysts for this reaction are alkali alkoxides like sodium methoxylate. Phenylmethoxydisilanes [22] or phenylchloride are used as additives. A mixture of methyltrimethoxysilane and dimethyldimethoxy-silane distils off as a byproduct of the redistribution reaction. Figure 2 shows the mechanism of the catalytic redistribution. 

As an alternative to condensation of dichlorosilanes by alkali metals, it is possible to synthesize poly silanes by the reaction of preformed dilithio compounds with dichlorosilanes. An early synthesis of a copolymer by this route is illustrated in equation (19).10 (see also Section 5.9.2). Finally, poly(phenylmethylsilylene) has been made by thermal decomposition of a silyl-mercury polymer36 (equation (20)). 

The disadvantages of the synthesis routes 1-4 are the application of highly reactive and expensive metals (Li, Na, K, Mg) and the enormous quantity of solvents. Particularly, as result of the dehalocoupling reactions, the polymers are unreactive at room temperature. To overcome these problems we synthesized spinnable reactive poly(silanes/-carbosilanes) via heterogeneous catalytic disproportionation of methylchlorodisilanes which have been wasted as a byproduct of the "Direct synthesis" of methylchlorosilanes so far. 

Because of the low solubility of most poly silanes in combination with expandable processing, that is, purification including the above mentioned hydrolysis steps, product yields and purity are often unsatisfactory if obtained by reductive coupling of chlorosilanes. A further negative aspect of this approach is the limited functional group tolerance. Accordingly, only the synthesis of polysilanes with inert pendant groups such as alkyl or aryl can be adequately achieved. 

The standard method for synthesis of poly silanes follows the original preparation of (Me2Si) by Burkhard. Diorganodichlorosilanes are treated with finely dispersed sodium metal in an inert diluent, usually above the melting point of sodium. Homopolymers are obtained from single dichlorosUanes, whUe cocondensation of mixtures of dichlorosilanes yields copolymers (equation 33). Toluene is the most commonly used solvent, but other aliphatic or aromatic solvents are also effective. After completion of the reaction, the mixture is quenched with alcohol and/or water to destroy any excess sodium and silyl anion, then filtered and... 

Si or Ge containing conductive polymers, e.g.. Si-bridged thiophene macromolecules, oc-silylated oligothiophenes, Ge-homopolymers and copolymers. Synthesis routes, structures and application for electroluminescence devices are reviewed in [115]. Poly(silane)s become semiconducting upon treatment with Asp5 [121]. 

Gray GM, Corey JY (2000) Synthesis of poly silanes by new procedures. Part 2 Catalytic... 

Quan, Z. Zuju, M. Lizhong, N. Jianding, C. 2007. Novel phenyl acetylene terminated poly(carborane-silane) Synthesis, characterization, and thermal property. J. Appl. Polym. ScL, 104 2498-2503. 

Although the introduction of halogen-containing substituents into linear polysilanes have been reported,(55, 41, 45) further modification of structure and electronic properties of Aese polysilanes have not been extensively studied. We have recently reported that free-radical chlorination of poly(phenylsilane) with CCI4 provides a facile synthesis of poly(chlorophenylsilane), a versatile synthon for the preparation of a variety of functionalized poly(phenylsilane).(59) TTiis new synthetic capability has allowed us to investigate the influence of polymer substituent on the electronic properties of poly silanes. 

See also PBT degradation structure and properties of, 44-46 synthesis of, 106, 191 Polycaprolactam (PCA), 530, 541 Poly(e-caprolactone) (CAPA, PCL), 28, 42, 86. See also PCL degradation OH-terminated, 98-99 Polycaprolactones, 213 Poly(carbo[dimethyl]silane)s, 450, 451 Polycarbonate glycols, 207 Polycarbonate-polysulfone block copolymer, 360 Polycarbonates, 213 chemical structure of, 5 Polycarbosilanes, 450-456 Poly(chlorocarbosilanes), 454 Polycondensations, 57, 100 Poly(l,4-cyclohexylenedimethylene terephthalate) (PCT), 25 Polydimethyl siloxanes, 4 Poly(dioxanone) (PDO), 27 Poly (4,4 -dipheny lpheny lpho sphine oxide) (PAPO), 347 Polydispersity, 57 Polydispersity index, 444 Poly(D-lactic acid) (PDLA), 41 Poly(DL-lactic acid) (PDLLA), 42 Polyester amides, 18 Polyester-based networks, 58-60 Polyester carbonates, 18 Polyester-ether block copolymers, 20 Polyester-ethers, 26... 

Hydrosilation reactions have been one of the earlier techniques utilized in the preparation of siloxane containing block copolymers 22,23). A major application of this method has been in the synthesis of polysiloxane-poly(alkylene oxide) block copolymers 23), which find extensive applications as emulsifiers and stabilizers, especially in the urethane foam formulations 23-43). These types of reactions are conducted between silane (Si H) terminated siloxane oligomers and olefinically terminated poly-(alkylene oxide) oligomers. Consequently the resulting system contains (Si—C) linkages between different segments. Earlier developments in the field have been reviewed 22, 23,43> Recently hydrosilation reactions have been used effectively by Ringsdorf 255) and Finkelmann 256) for the synthesis of various novel thermoplastic liquid crystalline copolymers where siloxanes have been utilized as flexible spacers. Introduction of flexible siloxanes also improved the processibility of these materials. 

The synthesis of PDMS macromonomers with vinyl silane end-groups and their free-radical copolymerization with vinyl acetate, leading to poly(vinyl acetate)-PDMS graft copolymers, was described 346). The copolymers produced were later hydrolyzed to obtain poly(vinyl alcohol)-PDMS graft copolymers. 

In this section, we comprehensively focused on the controlled synthesis, chiroptical characterization, and manipulation of optically active poly(dialkyl-silane)s. Although many artificial polymers adopting preferential screw sense... 

The compounds I and II represent intermediates for the synthesis of either carboxy functional or amino functional polysiloxanes. To this end I or II is either saponified with sodium hydroxide and concomitantly polycon-densated to a poly(carboxylaIky1 methyl siloxane) (III) or reduced to an amino alkyl methyl dialkoxy silane with sodium borohydride (J 5). ... 

Research Focus Synthesis of poly(isobomyl methacrylate-coisobomyl acrylate)-b-methacryloxypropyl-tris(trimethylsiloxy)silane and derivatives as topical cosmetic components having high shine and gloss. 

We have previously reported on the synthesis of a series of mono- and bifunctional poly(DMS) having a variety of reactive end groups, such as silan (Si-H), vinyl, hydroxyalkyl, dimethylamino and carboxyllic acid groups.7 We have also described already on telechelic poly(DMS) having tosylate end group, lb and l b, where the hydrosilation reaction of poly(DMS) having silan end group was performed with allyl alcohol in the presence of Pt/C catalyst, followed by the tosylation reaction with tosyl chloride in the presence of dimethylaminopyridine.9... 

---