Poly -polyacetylene

A second type of soHd ionic conductors based around polyether compounds such as poly(ethylene oxide) [25322-68-3] (PEO) has been discovered (24) and characterized. These materials foUow equations 23—31 as opposed to the electronically conducting polyacetylene [26571-64-2] and polyaniline type materials. The polyethers can complex and stabilize lithium ions in organic media. They also dissolve salts such as LiClO to produce conducting soHd solutions. The use of these materials in rechargeable lithium batteries has been proposed (25). 

Although polyacetylene has served as an excellent prototype for understanding the chemistry and physics of electrical conductivity in organic polymers, its instabiUty in both the neutral and doped forms precludes any useful appHcation. In contrast to poly acetylene, both polyaniline and polypyrrole are significantly more stable as electrical conductors. When addressing polymer stabiUty it is necessary to know the environmental conditions to which it will be exposed these conditions can vary quite widely. For example, many of the electrode appHcations require long-term chemical and electrochemical stabihty at room temperature while the polymer is immersed in electrolyte. Aerospace appHcations, on the other hand, can have quite severe stabiHty restrictions with testing carried out at elevated temperatures and humidities. 

The polymers which have stimulated the greatest interest are the polyacetylenes, poly-p-phenylene, poly(p-phenylene sulphide), polypyrrole and poly-1,6-heptadiyne. The mechanisms by which they function are not fully understood, and the materials available to date are still inferior, in terms of conductivity, to most metal conductors. If, however, the differences in density are taken into account, the polymers become comparable with some of the moderately conductive metals. Unfortunately, most of these polymers also have other disadvantages such as improcessability, poor mechanical strength, instability of the doped materials, sensitivity to oxygen, poor storage stability leading to a loss in conductivity, and poor stability in the presence of electrolytes. Whilst many industrial companies have been active in their development (including Allied, BSASF, IBM and Rohm and Haas,) they have to date remained as developmental products. For a further discussion see Chapter 31. 

Polyacetylene is considered to be the prototypical low band-gap polymer, but its potential uses in device applications have been hampered by its sensitivity to both oxygen and moisture in its pristine and doped states. Poly(thienylene vinylene) 2 has been extensively studied because it shares many of the useful attributes of polyacetylene but shows considerably improved environmental stability. The low band gap of PTV and its derivatives lends itself to potential applications in both its pristine and highly conductive doped state. Furthermore, the vinylene spacers between thiophene units allow substitution on the thiophene ring without disrupting the conjugation along the polymer backbone. 

Oxidative polymerization of trans-bis-deprotected 79 under Hay coupling conditions [54] yielded, after end-capping with phenylacetylene, the high-melting and readily soluble oligomers 80a-e with the poly (triacetylene) backbone [87,106] (Scheme 8). Poly(triacetylene)s [PTAs,-(C=C-CR=CR-C=C) -] are the third class of linearly conjugated polymers with a non-aromatic allcarbon backbone in the progression which starts with polyacetylene [PA,... 

FIGURE 26.4 Simple conductive organic polymers. From top to bottom polyacetylene, polyaniline, polypyrrole, polythiophene, and polybenzene (poly-p-phenylene). (Adapted from Novak et ah, 1997, with permission of the American Chemical Society.)... 

Figure 13 shows the irreversible conversion of a nonconjugated poly (p-phenylene pentadienylene) to a lithiun-doped conjugated derivative which has a semiconducting level of conductivity (0.1 to 1.0 S/cm) (29). Obviously, the neutral conjugated derivative of poly (p-phenylene pentadienylene) can then be reversibly generated from the n-type doped material by electrochemical undoping or by p-type compensation. A very similar synthetic method for the conversion of poly(acetylene-co-1,3-butadiene) to polyacetylene has been reported (30), Figure 14. This synthesis of polyacetylene from a nonconjugated precursor polymer containing isolated CH2 units in an otherwise conjugated chain is to be contrasted with the early approach of Marvel et al (6) in which an all-sp3 carbon chain was employed.

Synthesis of polyacetylene from poly(acetylene-co-1,3-butadiene). 

The one-dimensional chain of hydrogen atoms is merely a model. Flowever, compounds do exist to which the same kind of considerations are applicable and have been confirmed experimentally. These include polyene chains such as poly acetylene. The p orbitals of the C atoms take the place of the lx functions of the H atoms they form one bonding and one antibonding n band. Due to the Peierls distortion the polyacetylene chain is only stable with alternate short and long C-C bonds, that is, in the sense of the valence bond formula with alternate single and double bonds ... 

The electronic band structure of a neutral polyacetylene is characterized by an empty band gap, like in other intrinsic semiconductors. Defect sites (solitons, polarons, bipolarons) can be regarded as electronic states within the band gap. The conduction in low-doped poly acetylene is attributed mainly to the transport of solitons within and between chains, as described by the intersoliton-hopping model (IHM) . Polarons and bipolarons are important charge carriers at higher doping levels and with polymers other than polyacetylene. 

Both theoretical and experimental evidence suggest that the precise nature of the charge carriers in conjugated polymer systems varies from material to material, and it is still a subject of debate in many cases. A discussion of the various theoretical models for the electronic structure of conjugated polymers is given below, using polyacetylene and poly(paraphenylene) as examples. More detailed information on these materials and the applicability of these theoretical models is given in subsequent sections. 

A route to processible polyacetylene, devised initially using classical initiators (Scheme 1i) 576-578 has been developed using well-defined molybdenum initiators to prepare conjugated polymers.579-585 They have also been employed to prepare polyacetylene via the polymerization of cyclooctate-traene, COT,586 and by the isomerization of poly(benzvalene).587 588 Substituted, and hence soluble, polyacetylene derivatives may be synthesized by polymerizing monosubstituted COT substrates.589-591... 

The relatively high electronic conductivity of conducting polymers is connected with the presence in polymers of internal system of poly-7t-conjugated bonds. This is easy to understand on the example of a simplest type of conducting polymer (polyacetylene) in the main and activated states (Figure 6). 

Poly(4-phenoxybenzoyl-1,4-phenylene) (PPBP), sulfonated, 23 718 Polyacetal, antioxidant applications, 3 121 Polyacetaldehyde, 1 103 Polyacetal fiber, 13 392 Polyacetylene, 7 514-515 26 953 conduction in, 7 527 22 208 molecular structure of, 22 211 optical band gap, 7 529t Peierls distortion in, 22 203, 208 room temperature conductivity, 7 532 synthesis of, 22 213... 

Some conducting polymers with a conjugated polyvinyl structure, such as polyacetylene and poly(phenylacetylene), seem likely to be energetic enough, and reactive enough, to give trouble undoped, if they actually have the supposed structure [7],... 

---