Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Polarization interactions solvent

When viscometric measurements of ECH homopolymer fractions were obtained in benzene, the nonperturbed dimensions and the steric hindrance parameter were calculated (24). Erom experimental data collected on polymer solubiUty in 39 solvents and intrinsic viscosity measurements in 19 solvents, Hansen (30) model parameters, 5 and 5 could be deterrnined (24). The notation 5 symbolizes the dispersion forces or nonpolar interactions 5 a representation of the sum of 8 (polar interactions) and 8 (hydrogen bonding interactions). The homopolymer is soluble in solvents that have solubility parameters 6 > 7.9, 6 > 5.5, and 0.2 < <5.0 (31). SolubiUty was also determined using a method (32) in which 8 represents the solubiUty parameter... [Pg.555]

Silica gel, per se, is not so frequently used in LC as the reversed phases or the bonded phases, because silica separates substances largely by polar interactions with the silanol groups on the silica surface. In contrast, the reversed and bonded phases separate material largely by interactions with the dispersive components of the solute. As the dispersive character of substances, in general, vary more subtly than does their polar character, the reversed and bonded phases are usually preferred. In addition, silica has a significant solubility in many solvents, particularly aqueous solvents and, thus, silica columns can be less stable than those packed with bonded phases. The analytical procedure can be a little more complex and costly with silica gel columns as, in general, a wider variety of more expensive solvents are required. Reversed and bonded phases utilize blended solvents such as hexane/ethanol, methanol/water or acetonitrile/water mixtures as the mobile phase and, consequently, are considerably more economical. Nevertheless, silica gel has certain areas of application for which it is particularly useful and is very effective for separating polarizable substances such as the polynuclear aromatic hydrocarbons and substances... [Pg.93]

In the case of nonionic but polar compounds such as sugars, the excellent solvent properties of water stem from its ability to readily form hydrogen bonds with the polar functional groups on these compounds, such as hydroxyls, amines, and carbonyls. These polar interactions between solvent and solute are stronger than the intermolecular attractions between solute molecules caused by van der Waals forces and weaker hydrogen bonding. Thus, the solute molecules readily dissolve in water. [Pg.38]

If the protein of interest is a heteromultimer (composed of more than one type of polypeptide chain), then the protein must be dissociated and its component polypeptide subunits must be separated from one another and sequenced individually. Subunit associations in multimeric proteins are typically maintained solely by noncovalent forces, and therefore most multimeric proteins can usually be dissociated by exposure to pEI extremes, 8 M urea, 6 M guanidinium hydrochloride, or high salt concentrations. (All of these treatments disrupt polar interactions such as hydrogen bonds both within the protein molecule and between the protein and the aqueous solvent.) Once dissociated, the individual polypeptides can be isolated from one another on the basis of differences in size and/or charge. Occasionally, heteromultimers are linked together by interchain S—S bridges. In such instances, these cross-links must be cleaved prior to dissociation and isolation of the individual chains. The methods described under step 2 are applicable for this purpose. [Pg.131]

In comparison with traditional biphasic catalysis using water, fluorous phases, or polar organic solvents, transition metal catalysis in ionic liquids represents a new and advanced way to combine the specific advantages of homogeneous and heterogeneous catalysis. In many applications, the use of a defined transition metal complex immobilized on a ionic liquid support has already shown its unique potential. Many more successful examples - mainly in fine chemical synthesis - can be expected in the future as our loiowledge of ionic liquids and their interactions with transition metal complexes increases. [Pg.253]

Calculates dipole-field interaction and the corresponding energy spent on I polarizing the solvent. [Pg.64]

As reverse phase column ( LC-8) was used (octyldimethyl chains), the interactions with the stationary phase that controlled retention, and thus, the separation, were predominantly dispersive. It should be remembered, however, that although dispersive interactions dominate in the stationary phase, the separation is controlled by adjusting the competing dispersive interactions together with the polar interactions that take place in the mobile phase by the solvent composition. [Pg.215]

Increasing the solvent concentration increases the level of the competitive dispersive interactions that take place in the mobile phase. Use of a more dispersive solvent, such as tetrahydrofuran, will also achieve the same effect. In the same way, use of a more polar solvent such as methanol will increase the competitive polar interactions in the mobile phase. [Pg.236]

Certain alkyl halides and tosylates undergo E2 eliminations faster when treated with such weak bases as Cl in polar aprotic solvents or PhS than with the usual E2 strong bases such as RO in ROH. In order to explain these results Parker et al. proposed that there is a spectrum of E2 transition states in which the base can interact in the transition state with the a carbon as well as with the p hydrogen. At one end of this spectrum is a mechanism (called E2C) in which, in the transition... [Pg.1313]

Solvents grouped in the same region of the triangle will have similar selectivity, whereas solvents from other groups will have different selectivity even if their solvent strengths are similar. Acetone is a solvent characterized by a polarity value of 5.1 (group VI, e). Its X values given in Table 4.2 show its polar interaction properties that involve 35% proton-acceptor, 23% proton-donor, and 42% dipole interactions. Solvents near the comers have mainly one kind of selectivity. [Pg.80]

The solvatochromic classification of solvents takes into consideration only the polar interactions of the solvents and not their cohesion. The transfer of a solute from one solvent to another occurs with the cancellation of dispersion interactions [38]. [Pg.82]


See other pages where Polarization interactions solvent is mentioned: [Pg.199]    [Pg.264]    [Pg.524]    [Pg.489]    [Pg.403]    [Pg.405]    [Pg.231]    [Pg.241]    [Pg.294]    [Pg.66]    [Pg.157]    [Pg.444]    [Pg.204]    [Pg.168]    [Pg.69]    [Pg.929]    [Pg.6]    [Pg.21]    [Pg.904]    [Pg.47]    [Pg.27]    [Pg.289]    [Pg.298]    [Pg.305]    [Pg.137]    [Pg.171]    [Pg.170]    [Pg.343]    [Pg.267]    [Pg.904]    [Pg.9]    [Pg.193]    [Pg.195]    [Pg.198]    [Pg.617]    [Pg.620]    [Pg.826]    [Pg.10]    [Pg.106]    [Pg.235]   
See also in sourсe #XX -- [ Pg.295 ]




SEARCH



Coulomb interaction polar solvents

Polar interactions

Polar solvents

Polarity, solvent

Polarity/polarization solvent

Polarization interaction

Polarization solvent

Solvent polar solvents

Solvents, interactive

© 2024 chempedia.info