Poisons halogens

Feed Ga.s Purifica.tion. Because nickel-based reforming catalysts are quite sensitive to sulfur, halogen, and heavy metal poisons which may be found ia natural gas, a feedstock purification system is normally required. Sulfur compounds, ia both organic and inorganic forms, are the most common... 

Catalytic Oxidation. Catalytic oxidation is used only for gaseous streams because combustion reactions take place on the surface of the catalyst which otherwise would be covered by soHd material. Common catalysts are palladium [7440-05-3] and platinum [7440-06-4]. Because of the catalytic boost, operating temperatures and residence times are much lower which reduce operating costs. Catalysts in any treatment system are susceptible to poisoning (masking of or interference with the active sites). Catalysts can be poisoned or deactivated by sulfur, bismuth [7440-69-9] phosphoms [7723-14-0] arsenic, antimony, mercury, lead, zinc, tin [7440-31-5] or halogens (notably chlorine) platinum catalysts can tolerate sulfur compounds, but can be poisoned by chlorine. 

Metals in the platinum family are recognized for their ability to promote combustion at lowtemperatures. Other catalysts include various oxides of copper, chromium, vanadium, nickel, and cobalt. These catalysts are subject to poisoning, particularly from halogens, halogen and sulfur compounds, zinc, arsenic, lead, mercury, and particulates. It is therefore important that catalyst surfaces be clean and active to ensure optimum performance. 

In line with the conclusions derived in the model study10), the effect of solvent on initiator reactivity can also be explained on the basis of halogen polarizability in MeX. A detailed discussion of these trends is given in Section VIII. Mel is a poison in isobutylene polymerization. The poisoning activity of Mel will be discussed in Section VII. 

Promoters may influence selectivity by poisoning undesired reactions or by increasing the rates of desired intermediate reactions so as to increase the yield of the desired product. If they act in the first sense, they are sometimes referred to as inhibitors. An example of this type of action involves the addition of halogen compounds to the catalyst used for oxidizing ethylene to ethylene oxide (silver supported on alumina). The halogens prevent complete oxidation of the ethylene to carbon dioxide and water, thus permitting the use of this catalyst for industrial purposes. 

An efficient, low temperature oxidation catalyst was developed based on highly disperse metal catalyst on nanostructured Ti02 support. Addition of dopants inhibits metal sintering and prevents catalyst deactivation. The nanostructured catalyst was formulated to tolerate common poisons found in environments such as halogen- and sulfur-containing compounds. The nanocatalyst is capable of oxidizing carbon monoxide and common VOCs to carbon dioxide and water at near ambient temperatures (25-50 °C). 

Danni 0, Brossa 0, Burdino E, et al. 1981. Toxieity of halogenated hydroearbons in pretreated rats - An experimental model for the study of integrated permissible limits of environmental poisons. Int Arch Occup Environ Health 49 165-176. 

Bismuth is flammable as a powder. The halogen compounds of bismuth are toxic when inhaled or ingested. Some of the salts of bismuth can cause metallic poisoning in a manner similar to mercury and lead. 

Iodine is the least reactive of the elements in the halogen group 17. Most people associate iodine with the dark-brown color of the tincture of iodine used as an antiseptic for minor skin abrasions and cuts. A tincture is a 50% solution of iodine in alcohol. Although it is still used, iodine is no longer the antibiotic of choice for small skin wounds. Since iodine is a poison that kills bacteria, iodine tablets are often used by campers and others to purify water that is taken from outdoor streams. 

Carbon monoxide is a highly flammable and poisonous gas. Its flammable limits in air are 12.5 to 74.2% by volume, and the autoignition temperature 700°C. It explodes when exposed to flame. Reactions with interhalogen compounds, such as, bromine pentafluoride or halogen oxides can cause explosion. It forms explosive products with sodium or potassium that are sensitive to heat and shock. 

Sodium azide is a toxic as well as an explosive substance (Patnaik, P. 1999. A Comprehensive Guide to the Hazardous Properties of Chemical Substances, 2nd e(j New York John Wdey Sons). Although inert to shock, violent decomposition can occur when heated at 275°C. Contact of solid or solution with lead and copper must be avoided. Reactions with halogens, carbon disulfide, or chromyl chloride can be explosive. Dissolution in water produces toxic vapors of hydrazoic acid. The salt is an acute poison causing headache, hypotension, hypothermia, and convulsion. 

---