Pipe, seamless steel

Welded and Seamless Wrought Steel Pipe Stainless Steel Pipe... [Pg.118]

Pipe Seamless Seamless Seamless Seamless ASTM A53 Type F Schedule 40 galvanized to ASTM A153 ASTM A312 Type316L stainless steel ... [Pg.48]

ASTMAI20 Black and hot dipped zinc coated (galvanized) welded and seamless steel pipe for ordinary uses G3442... [Pg.76]

Pipe Seamless Seamless Seamless Seamless Carbon steel, (ASTM A120 Schedule 40 galvanised to ASTM A153)... [Pg.152]

The largest reactors used at Iowa State College were 35 cm in diameter and 120 cm high, made of standard-wall seamless steel pipe. They were closed with a welded steel plate at the bottom and a cover bolted to a flange at the top. The liner was made of electrically fused dolomitic lime which was finely powdered and packed into the steel tube to form a dense layer... [Pg.278]

Paper tube 38 mm, wall thickness 4 mm seamless steel pipe... [Pg.321]

A 714 High-strength low-alloy welded and seamless steel pipe V, NI, Cr, Mo, Cu, Nb Pipe with nominal pipe size diameters of 13 to 660 mm Minimum yield strength of < 345 MPa and coTosion resistance two (X four times that of carbon steel Piping... [Pg.245]

Seamless steel pipe manufactured to API Specification 5D for Drill Pipe is used during the drilling operations. Available grades are E-75, X-95, G-105, and S-135 with specified minimum yield strengths (SMYS) of 75, 95, 105, and 135 ksi (517, 655, 724, 931 MPa), respectively. Drill pipe lengths are connected by tool joints, which involve a threaded pin and a box coupling. The couplings are friction welded to the pipe. [Pg.812]

Table 13-2. Dimensions of Welded and Seamless Steel Pipe, Inches...

A Russian ammonia pipeline of nearly 2400 km extends from Togliatti on the Volga River to the Port of Odessa on the Black Sea, and a 2200-km, 250-mm dia branch line extends from Godovka in the Ukraine to Panioutino. The pipeline is constmcted of electric-resistance welded steel pipe with 7.9-mm thick walls but uses seamless pipe with 12.7-mm thick walls for river crossings. The pipeline is primed and taped with two layers of polyethylene tape and suppHed with a cathodic protection system for the entire pipeline. Mainline operating pressure is 8.15 MPa (1182 psi) and branch-line operating pressure is 9.7 MPa (1406 psi) (11). [Pg.46]

Overhead tanks, purifiers, and degasing drums are covered. All pipe welding is to be done according to Section IX of the ASME code, and all piping must be seamless carbon steel, minimum schedule 80 for sizes inches (38.1 mm) and smaller, and a minimum of schedule 40 for pipe sizes 2 inches (50.8 mm) or greater. [Pg.167]

The major portion of drill string is composed of drill pipe. The drill pipe is manufactured by the seamless process. According to API Specification 5A (Thirty-fifth Edition, March 1981), seamless pipe is defined as a wrought steel tabular product made without a welded seam. It is manufactured by hot working steel or, if necessary, by subsequently cold finishing the hot worked tabular product to produce the desired shape, dimensions and properties. [Pg.735]

To meet specific downhole requirements, seamless drill pipe is available in five steel grades, namely D, E, X, G and S. (Grades X, G and S are considered to be high-strength pipe grades.) The mechanical properties of these steel grades are as follows ... [Pg.736]

A 53 Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless [Note (2)]... [Pg.26]

A 333 Seamless and Welded Steel Pipe for Low-Temperature Service [Notes (2) and (4)]... [Pg.26]

A 376 Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service... [Pg.26]

ASTM A53 Zinc coated welded and seamless black and hot dipped steel pipe G3452/G3454... [Pg.76]

ASTMAI06 Seamless carbon steel pipe for high-temperature service I7I75 3602 NFA 49.211 G3456... [Pg.76]

ASTM A312 Seamless and welded austenitic stainless steel pipe 17440 3605 NFA 49214/49219 G3459... [Pg.77]

ASTM A524 Seamless carbon steel pipe for atmospheric and lower temperatures G3460... [Pg.77]

ASTM A 53, Standard specification for pipe, steel, black and hot-dipped, zinc-coated, welded and seamless. [Pg.200]

ASTM A 106, Standard specification for seamless carbon steel pipe for high -temperature service. [Pg.200]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...