Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Pipes seamless

Pipe Seamless Seamless Seamless Seamless ASTM A53 Type F Schedule 40 galvanized to ASTM A153 ASTM A312 Type316L stainless steel ... [Pg.48]

Pipe Seamless Seamless Seamless Seamless Carbon steel, (ASTM A120 Schedule 40 galvanised to ASTM A153)... [Pg.152]

Titanium and titanium aUoy strip, sheet, and plate Seamless and welded titanium and titanium alloy pipe Seamless and welded titanium and titanium alloy tubes for condensers and heat exchangers Titanium and titanium alloy bars and biUets Seamless and welded imalloyed titanium welding fittings (1974) Titanium and titanium alloy castings Titanium and titanium alloy forgings... [Pg.527]

A Russian ammonia pipeline of nearly 2400 km extends from Togliatti on the Volga River to the Port of Odessa on the Black Sea, and a 2200-km, 250-mm dia branch line extends from Godovka in the Ukraine to Panioutino. The pipeline is constmcted of electric-resistance welded steel pipe with 7.9-mm thick walls but uses seamless pipe with 12.7-mm thick walls for river crossings. The pipeline is primed and taped with two layers of polyethylene tape and suppHed with a cathodic protection system for the entire pipeline. Mainline operating pressure is 8.15 MPa (1182 psi) and branch-line operating pressure is 9.7 MPa (1406 psi) (11). [Pg.46]

Copper and Copper Alloys Seamless copper, bronze, brass, copper-nickel-aUoy, and copper-silicon-aUoy pipe and tubing are produced by extrusion. Tubing is available in outside-diameter sizes from Vi6 to 16 in and in a range of wall thicknesses varying from 0.005 in for the smallest tubing to 0.75 in for the 16-in size. Tubing is usually specified by outside diameter and wall thickness. [Pg.971]

Copper-silicon alloy (96 percent cooper, 3 percent silicon, 1 percent manganese), per ASTM B315, is furnished as seamless pipe and welding fittings in Schedule 10 and regular and extra-strong copper pipe thicknesses. It is easier to weld than copper. [Pg.973]

Asbestos Cement Asbestos-cement pipe is seamless pipe made of sihca and portland cement, compacted under heavy pressure, uniformly reinforced with asbestos fiber, and thoroughly cured. The interior surface is smooth, does not corrode, and does not tuberculate. Under normal conditions of operation, asbestos cement will handle... [Pg.974]

Copper and copper alloy Seamless pipe and tubing Copper pipe B42 31 Drawn 102, 120, 122 i/f -2, inclusive 45.0 40.0 9, 27 -325... [Pg.990]

Overhead tanks, purifiers, and degasing drums are covered. All pipe welding is to be done according to Section IX of the ASME code, and all piping must be seamless carbon steel, minimum schedule 80 for sizes inches (38.1 mm) and smaller, and a minimum of schedule 40 for pipe sizes 2 inches (50.8 mm) or greater. [Pg.167]

Round-welded or seamless pipe for use as foundation piles where pipe cylinder acts as a permanent load-carrying member usually filled with concrete. Used below the ground in foundation work in the construction industry for piers, docks, highways, bridges and all types of buildings. Fabricated to ASTM piling specifications (ASTM A-252). [Pg.137]

Welded or seamless pipe used for structural or load-bearing applications in aboveground installations. Fabricated in nominal wall thicknesses and sizes to ASTM specifications in round, square, rectangular and other cross-sectional shapes. [Pg.140]

Piling pipe Round-welded or seamless pipe for use as foundation... [Pg.156]

Structural pipe Welded or seamless pipe used for structural or load-... [Pg.159]

PIPE ly/ and smaller Schedule 80, ASTM-A106 Gr. B Seamless P.E. (Plain End). Nipples Sch. 80 ASTM-A106 Gr. B... [Pg.27]

The major portion of drill string is composed of drill pipe. The drill pipe is manufactured by the seamless process. According to API Specification 5A (Thirty-fifth Edition, March 1981), seamless pipe is defined as a wrought steel tabular product made without a welded seam. It is manufactured by hot working steel or, if necessary, by subsequently cold finishing the hot worked tabular product to produce the desired shape, dimensions and properties. [Pg.735]

To meet specific downhole requirements, seamless drill pipe is available in five steel grades, namely D, E, X, G and S. (Grades X, G and S are considered to be high-strength pipe grades.) The mechanical properties of these steel grades are as follows ... [Pg.736]

Couplings for pipe (both casing and tubing) shall be seamless and, unless otherwise specified on the purchase order, shall be of the same grade as the pipe, except grade H-40 and J-55 pipe which may be furnished with grade J-55 or K-55 couplings. [Pg.1144]

The British Gas version uses magnetic saturation, and can identify corrosion on both internal and external pipe surfaces. The specification for seamless pipe is ... [Pg.1147]

Pipe and tube mills (seamless and butt-weld)... [Pg.60]

See other pages where Pipes seamless is mentioned: [Pg.16]    [Pg.203]    [Pg.294]    [Pg.16]    [Pg.203]    [Pg.294]    [Pg.53]    [Pg.126]    [Pg.431]    [Pg.24]    [Pg.945]    [Pg.948]    [Pg.949]    [Pg.971]    [Pg.973]    [Pg.973]    [Pg.978]    [Pg.988]    [Pg.988]    [Pg.988]    [Pg.990]    [Pg.990]    [Pg.1004]    [Pg.156]    [Pg.429]    [Pg.181]    [Pg.494]    [Pg.821]    [Pg.949]    [Pg.1132]    [Pg.90]    [Pg.33]   
See also in sourсe #XX -- [ Pg.343 ]



SEARCH



Line pipe, seamless

Pipe, seamless steel

Seamless

Seamless Pipe and Tubing

© 2024 chempedia.info