Phase Techniques

Memfield s concept of a solid phase method for peptide synthesis and his devel opment of methods for carrying it out set the stage for an entirely new way to do chem ical reactions Solid phase synthesis has been extended to include numerous other classes of compounds and has helped spawn a whole new field called combinatorial chemistry Combinatorial synthesis allows a chemist using solid phase techniques to prepare hun dreds of related compounds (called libraries) at a time It is one of the most active areas of organic synthesis especially m the pharmaceutical industry... 

Environmental aspects, as well as the requirement of efficient mixing in the mixed acid process, have led to the development of single-phase nitrations. These can be divided into Hquid- and vapor-phase nitrations. One Hquid-phase technique involves the use of > 98% by weight nitric acid, with temperatures of 20—60°C and atmospheric pressure (21). The molar ratios of nitric acid benzene are 2 1 to 4 1. After the reaction is complete, excess nitric acid is vacuum distilled and recycled. An analogous process is used to simultaneously produce a nitrobenzene and dinitrotoluene mixture (22). A conversion of 100% is obtained without the formation of nitrophenols or nitrocresols. The nitrobenzene and dinitrotoluene are separated by distillation. 

Introduction of a 3-bromosubstituent onto thiophene is accompHshed by initial tribromination, followed by reduction of the a-bromines by treatment with zinc/acetic acid, thereby utilizing only one of three bromines introduced. The so-called halogen dance sequence of reactions, whereby bromothiophenes are treated with base, causing proton abstraction and rearrangement of bromine to the produce the most-stable anion, has also been used to introduce a bromine atom at position 3. The formation of 3-bromotbiopbene [872-31-1] from this sequence of reactions (17) is an efficient use of bromine. Vapor-phase techniques have also been proposed to achieve this halogen migration (18), but with less specificity. Table 3 summarizes properties of some brominated thiophenes. 

Vapor-Phase Techniques. Vapor-phase powder synthesis teclmiques, including vapor condensation, vapor decomposition, and vapor—vapor, vapor—Hquid, and vapor—soHd reactions, employ reactive vapors or gases to produce high purity, ultrafine, reactive ceramic powders. Many nonoxide powders, eg, nitrides and carbides, for advanced ceramics are prepared by vapor-phase synthesis. 

Vapor-Phase Processing. Optical fiber preforms are prepared by vapor-phase techniques because of the superior clarity of the products. 

This technology also allows the control of refractive index profiles by doping. AH vapor-phase techniques use a vapor stream of volatile haUdes such as SiCl, GeCl, BCl, or POCl, and gases such as CI2 or O2. The reactants are oxidized and deposited onto a substrate to produce a soHd glass preform which is then drawn into a fiber. The variations of the technique differ in the way the reactants are oxidized (16). 

The low polarity of CO,-based eluents makes SFC a normal phase technique. Therefore, it is not surprising that most of the successful applications of chiral SFC have utilized CSPs designed for normal phase LC. Flowever, some exceptions have been noted. Specific applications of various CSPs are outlined in the next sections. 

The details of the solid-phase technique have been improved substantially over the years, but the fundamental idea remains the same. The most commonly used resins at present are either the Wang resin or the PAM (phenyl-acetamidomethyl) resin, and the most commonly used N-protecting group is the fluorenylmethyloxycarbonyl, or Fmoc group, rather than Boc. 

The reverse-phase technique is used less, however, with the advent of hydrophobic bonded phases (Section 8.2(3)). 

S.P. solid-phase technique L.P. liquid-phase technique OPTcp pentachlorophenyl ester TEEP tetraethyl pyrophosphit OTCp trichlorophenyl ester ONp p-nitrophenyl ester ONSu N-hydroxysuccinimido ester OPFp pentafluorophenyl ester OQu 8-hydroxyquinyl ester OPy 3-hydroxy-pyridyl ester ODnp 2,4-dinitrophenyl ester DCC dicyclohexylcarbodiimide HOBn 3-hydroxy-4-oxo-3,4-dihydro-l,2,3-benzotriazin Opi JV-hy-droxypiperidine EEDQ 2-ethoxy-l-ethoxycarbonyl-l,2-dihydroquinoline Tos p-toluenesulfonyl PTC propanetricarboxylic acid OBu tm-butyl ester Nva norvaline Aha aminohexanoic acid Om ornithine... 

Difficulties due to side reactions (cyclization) and a broad molecular weight distribution accompanying the polycondensation of active esters led to the application of methods wherein the polymers are built up stepwise. In 1968, Sakakibara et al.31) introduced the solid-phase technique using Merrifield s resin. By stepwise addition of tert-pentyloxycar-bonyl tripeptides, they have synthesized (Pro-Pro-Gly)n with n = 5, 10, 15 and 20. 

In the case of (Ala-Gly-Pro)n with n = 5-15, the tripeptide chains were synthesized by the liquid-solid phase technique. As mentioned above, the coupling of longer preformed peptide chains was difficult and the yield of the trimer was low. Therefore, a liquid-solid phase technique was applied in which a trimer was grown in a stepwise manner, beginning from a trifunctional crosslinked base A. 

In addition to the insoluble polymers described above, soluble polymers, such as non-cross-linked PS and PEG have proven useful for synthetic applications. However, since synthesis on soluble supports is more difficult to automate, these polymers are not used as extensively as insoluble beads. Soluble polymers offer most of the advantages of both homogeneous-phase chemistry (lack of diffusion phenomena and easy monitoring) and solid-phase techniques (use of excess reagents and ease of isolation and purification of products). Separation of the functionalized matrix is achieved by either precipitation (solvent or heat), membrane filtration, or size-exclusion chromatography [98,99]. 

PEG polymers are widely used as water soluble supports [99]. Although these polymers suffer from easy loss of PEG oligomers, they are frequently used for the preparation of small organic molecules [100-105] and biopolymers [106,107]. The main benefit of PEG supports is their solubility in water as well as most organic solvents. Also, as opposed to most solid-phase techniques, PEG polymers allow for easy on-bead NMR monitoring. Soluble PEG supports have been used frequently in synthetic microwave chemistry protocols [108-122]. 

Figure 6.2 Separation of products by (a) cyclic anhydrides as acyl donors and (b) fluorous phase technique.

Although the solid-phase technique was first developed for the synthesis of peptide chains and has seen considerable use for this purpose, it has also been used to synthesize chains of polysaccharides and polynucleotides in the latter case, solid-phase synthesis has almost completely replaced synthesis in solution. The technique has been applied less often to reactions in which only two molecules are brought together (nonrepetitive syntheses), but many examples have been reported. 

The recent liquid phase synthetic techniques provide us the metal nanoparticles with the standard deviation smaller than 10%. So a lot of scientists have been attracted by an investigation on the transition from molecular to bulk properties from both the fundamental and technological points of view. Here we present our recent liquid phase techniques to control the size and composition of Au and FePt nanoparticles. 

Manufacture well established well established techniques established for gas phase techniques for liquid phase at developmental stage... 

Solution and solid phase techniques have each been used... 

Peptide synthesis was amenable to solid-phase techniques since the process was repetitive. The C-terminal amino acid is attached to polymeric surface and the peptide chain is assembled via a two-step process coupling of the incoming amino acid that has the alpha-amino group protected... 

---