Performance tendency

The question of whether the performance tendency results as a product of expectations and value or of probability and usefulness played a relatively important role in this connection. This question led to some stimulating numbers games (Edwards, 1968), but no conclusions could be arrived at this is no surprise, because if probability is not appropriate as a basis for decision-making in hazardous situations, the relative importance of incentives, measured in termsof expectations, cannot serve as a basis from which one can, in the usual manner, determine the intention of performance. The solution of this problem would be relatively simple if readiness to perform depended only on the evaluation of the consequences, as is, according to Jungermamnn (1982), the case for risk perception among lay persons. 

The tests in the two previous paragraphs are often used because they are easy to perform. They are, however, limited due to their neglect of intermolecular interactions. Testing the effect of intennolecular interactions requires much more intensive simulations. These would be simulations of the bulk materials, which include many polymer strands and often periodic boundary conditions. Such a bulk system can then be simulated with molecular dynamics, Monte Carlo, or simulated annealing methods to examine the tendency to form crystalline phases. 

Development of the desired shade depends to a large degree on the tendency of the individual dyes in the mixture to adhere to the hair in proper proportions. Performance evaluation on many different types of hair, for example, natural, bleached, and permanendy waved, is required. 

The CBD diagram can provide various lands of information about the performance of an aUoy/medium system. The technique can be used for a direc t calculation of the corrosion rate as well as for indicating the conditions of passivity and tendency of the metal to suffer local pitting and crevice attack. 

Unit layout as installed is the next step of preparation. This may take some effort if analysts have not been involvea with the unit prior to the plant-performance analysis. The equipment in the plant should correspond to that shown on the PFDs and P IDs. Wmere differences are found, analysts must seek explanations. While a hne-by-line trace is not required, details of the equipment installation and condition must be understood. It is particularly useful to correlate the sample and measurement locations and the bypasses shown on the P IDs to those ac tuaUy piped in the unit. Gas vents and liquid (particularly water-phase) discharges may have been added to the unit based on operating experience out not shown on the P IDs. While these flows may ultimately be small within the context of plant-performance an ysis, they may have sufficient impact to alter conclusions regarding trace component flows, particularly those that have a tendency to build in a process. 

To be able to systematically identify opportunities for reducing human error, it is useful to ask the question, What is human error One definition is that human error is an inappropriate or undesirable human decision or behavior that reduces, or has the potential for reducing safety or system performance (Rasmusssen 1979). There is a tendency to view errors as operator errors. However, the error may result from inadequate management, design, or maintenance of the system. This broader view which encompasses the whole system can help provide opportunities for instituting measures to reduce the likelihood of errors. 

Proper condensed phase simulations require that the non-bond interactions between different portions of the system under study be properly balanced. In biomolecular simulations this balance must occur between the solvent-solvent (e.g., water-water), solvent-solute (e.g., water-protein), and solute-solute (e.g., protein intramolecular) interactions [18,21]. Having such a balance is essential for proper partitioning of molecules or parts of molecules in different environments. For example, if the solvent-solute interaction of a glutamine side chain were overestimated, there would be a tendency for the side chain to move into and interact with the solvent. The first step in obtaining this balance is the treatment of the solvent-solvent interactions. The majority of biomolecular simulations are performed using the TIP3P [81] and SPC/E [82] water models. 

Static techniques to determine unbalance can be performed by setting a rotor on a set of frictionless supports the heavy point of the rotor will have a tendency to roll down. Noting the location of this point, the resultant unbalance force can be found, and the rotor can be statically balanced. Static balancing makes the center of gravity of the rotor approach the centerline of two end supports. 

Bonded-bolted joints generally have better performance than either bonded or bolted joints. The bonding results in reduction of the usual tendency of a bolted joint to shear out. The bolting decreases the likelihood of a bonded joint debonding in an interfacial shear mode. The usual mode of failure for a bonded-bolted joint is either a tension failure through a section including a fastener or an interlaminar shear failure in the composite material or a combination of both. 

---