Pentachloride oxides

Wieland, 1907 Wieland and Wecker, 1910). Oxidation was carried out in an inert solvent such as benzene, from which the salt precipitated. The easier and more reliable preparation of perchlorate salts by the iodine-silver perchlorate method (Weitz and Schwechten, 1926, 1927), to which we have referred earlier (p. 168), allowed a much clearer understanding of the nature of triarylaminium ions to be obtained. Isolation of perchlorates permitted chemical studies, and easy reduction to the triarylamine by iodide ion, ferrous ion, etc., was consistent with the cation-radical view that was developed. The name aminium ion was coined by Weitz. Other salts were prepared such as tritolylaminium picrate (by oxidation of the amine with lead dioxide in the presence of picric acid), and it was also recognized that conjugate anions in salts obtained by oxidation with antimony pentachloride, phosphorus pentachloride and ferric chloride had to be complex anions rather than simple anionic radicals. This is a particularly pertinent point in antimony pentachloride oxidations (p. 165). 

Phosphorus pentachloride sublimes and then dissociates on heating, dissociation being complete at 600 K. It is attacked by water, yielding first phosphorus trichloride oxide, thus ... 

The trichloride oxide is also obtained by distillation of a mixture of the pentachloride and anhydrous ethanedioic acid ... 

Chlorine reacts with most elements, both metals and non-metals except carbon, oxygen and nitrogen, forming chlorides. Sometimes the reaction is catalysed by a trace of water (such as in the case of copper and zinc). If the element attacked exhibits several oxidation states, chlorine, like fluorine, forms compounds of high oxidation state, for example iron forms iron(III) chloride and tin forms tin(IV) chloride. Phosphorus, however, forms first the trichloride, PCI3, and (if excess chlorine is present) the pentachloride PCI5. 

Hydroxylamine Barium oxide and peroxide, carbonyls, chlorine, copper(II) sulfate, dichromates, lead dioxide, phosphorus trichloride and pentachloride, permanganates, pyridine, sodium, zinc... 

Phosphorus pentachloride Aluminum, chlorine, chlorine dioxide, chlorine trioxide, fluorine, magnesium oxide, nitrobenzene, diphosphorus trioxide, potassium, sodium, urea, water... 

Safety. Magnesium oxide (fume) has a permissible exposure limit (PEL) (134) (8 hours, TWA), of 10 mg/m total dust and 5 mg/m respirable fraction. Tumorigenic data (intravenous in hamsters) show a TD q of 480 mg/kg after 30 weeks of intermittent dosing (135), and toxicity effects data show a TC q of 400 mg/m for inhalation in humans (136). Magnesium oxide is compatible with most chemicals exceptions are strong acids, bromine pentafluoride, chlorine trifluoride, interhalogens, strong oxidizers, and phosphorous pentachloride. 

Another method of purifying niobium is by distillation of the anhydrous mixed chlorides (29). Niobium and tantalum pentachlorides boil within about 15°C of one another which makes control of the process difficult. Additionally, process materials must withstand the corrosion effects of the chloride. The system must be kept meticulously anhydrous and air-free to avoid plugging resulting from the formation of niobium oxide trichloride, NbOQ. Distillation has been used commercially in the past. 

Niobium Pent chloride. Niobium pentachloride can be prepared in a variety of ways but most easily by direct chlorination of niobium metal. The reaction takes place at 300—350°C. Chlorination of a niobium pentoxide—carbon mixture also yields the pentachloride however, generally the latter is contaminated with niobium oxide trichloride. The pentachloride is a lemon-yeUow crystalline soHd that melts to a red-orange Hquid and hydrolyzes readily to hydrochloric acid and niobic acid. It is soluble in concentrated hydrochloric and sulfuric acids, sulfur monochloride, and many organic solvents. 

Tantalum. Numerous methods developed to extract tantalum metal from compounds included the reduction of the oxide with carbon or calcium the reduction of the pentachloride with magnesium, sodium, or hydrogen and the thermal dissociation of the pentachloride (30). The only processes that ever achieved commercial significance are the electrochemical reduction of tantalum pentoxide in molten K TaF /KF/KCl mixtures and the reduction of K TaF with sodium. 

The reddish brown pentachloride, uranium pentachloride [13470-21 -8], UCl, has been prepared in a similar fashion to UCl [10026-10-5] by reduction—chlorination of UO [1344-58-7] under flowing CCl, but at a lower temperature. Another synthetic approach which has been used is the oxidation of UCl by CI2. The pentachloride has been stmcturaHy characterized and consists of an edge-sharing bioctahedral dimer, U2CI2Q. The pentachloride decomposes in H2O and acid, is soluble in anhydrous alcohols, and insoluble in benzene and ethers. 

Uranium pentabromide [13775-16-1], UBr, is unstable toward reduction and the pentaiodide is unknown. Two synthetic methods utilized for the production of UBr involve the oxidation of uranium tetrabromide [13470-20-7], UBr, by Br2 or by bromination of uranium turnings with Br2 in acetonitrile. The metastable pentabromide is isostmctural with the pentachloride, being dimeric with edge-sharing octahedra U2Br2Q. 

Hydroxy and mercapto substituents at the 3- and 5-positions can also exist in tautomeric forms (see Section 4.01.5.2) and can be alkylated at either the substituent or the ring nitrogen atom. 3-Methoxy groups are not replaced by nucleophiles, but both 3- and 5-alkylthio groups react readily, as does 3-methoxy-l,2-benzisothiazole. Alkylthio compounds can be oxidized to sulfoxides and sulfones, and the latter readily undergo nucleophilic replacement. All the hydroxy compounds react with phosphorus pentachloride to give the chloro derivatives. 

Radical cations can be derived from aromatic hydrocarbons or alkenes by one-electron oxidation. Antimony trichloride and pentachloride are among the chemical oxidants that have been used. Photodissociation or y-radiation can generate radical cations from aromatic hydrocarbons. Most radical cations derived from hydrocarbons have limited stability, but EPR spectral parameters have permitted structural characterization. The radical cations can be generated electrochemically, and some oxidation potentials are included in Table 12.1. The potentials correlate with the HOMO levels of the hydrocarbons. The higher the HOMO, the more easily oxidized is the hydrocarbon. 

As reagents concentrated sulfuric acid, hydrochloric acid, liquid sulfur dioxide, thionyl chloride, phosphorus pentachloride, zinc oxide" and even silica gel can be used. Reagents like phosphorus pentachloride (as well as thionyl chloride and others) first convert the hydroxy group of the oxime 1 into a good leaving group ... 

Chlorination of ferroalloys (ferroniobium-tantalum) is a more economical and simple alternative [30]. The process is performed on a sodium chloride melt that contains iron trichloride, FeCU. Chlorine is passed through the melt yielding NaFeCl4, which interacts as a chlorination agent with the Fe-Nb-Ta alloy. Chlorination of ferroalloys allows for the production of pure tantalum and niobium pentachlorides, which are used further in the production of high purity oxides and other products. 

Several methods are described for the production of tantalum and niobium metal. Metals can be obtained by reduction of pentachlorides with magnesium, sodium, hydrogen or by thermal decomposition in vacuum [24,28]. Oxides can be reduced using carbon, aluminum, calcium, magnesium [28, 537, 538] or alkali and rare earth metals [539]. 

Oxidative chlorination of 1,10-penanthroline using excess phosphorus pentachloride and phosphoryl chloride gave rise to high yields of products chlorinated meta and para to the annular nitrogens (92BCJ2007). 

In the Meisenheimer reaction of quinoline 1-oxides chlorine atoms usually enter the 2-and 4-positions, but not exclusively. 2,4-Dibromoquinoline 1-oxide was 6-chlorinated (57MI1), and the 5- and 6-nitroquinoline 1-oxides were 3-chlorinated to some extent (44JOC302). This reaction with phosphoryl chloride-phosphorus pentachloride has also been used in the preparation of chlorinated phenanthrolines (88YZ1148). 

Chlorination. When 75 was treated with chlorine in the presence of aluminium chloride, initial chlorination took place at the 5-position, but the reaction was rather unselective 5,8-di-, 5,7,8-tri-, and 5,6,7,8-tetra-chloroisoquinolines were also formed (64JOC329). Perchlorination has been achieved by initial reaction of the isoquinoline-aluminium chloride complex with chlorine, as above, followed by treatment with phosphorus pentachloride at 270°C in an autoclave [66JCS(C)2328]. Treatment of 1,8-dimethylisoquinoline with NCS gave the 5-chloro derivative (91NKK-1193). Meisenheimer reaction of isoquinoline 2-oxides with phosphoryl chloride gave 1-chloroisoquinoline (84MI2). 

P pentachloride causes ignition on contact with Al powder (Ref 2), while contact with a mixt of chlorine and chlorine dioxide usually results in expln, possibly due to formation of the more sensitive chlorine monoxide (Ref 5). Interaction with diphosphorus trioxide is rather violent at ambient temp (Ref 3) treatment with fluorine causes the entire mass to become incandescent (Ref 1). Ignition occurs when hydroxylamine is mixed with P pentachloride (Ref 6), while mixts with Mg oxide react with brilliant incandescence (Ref 7). The residue from interaction of P pentachloride and anilide in benz and removal of solvent and phosphoryl chloride in vacuo expld violently on admission of air (Ref 12). A soln of P pentachloride in nitrobenzene is stable at 110°, but begins to de-... 

Phosphorus pentachloride, for conversion of pentaacetylgluconic add to add chloride, 41, 80 for oxidation of cycloheptatriene to tropylium fluoborate, 43, 101 with cyanoacetic acid, 41, 5 Phosphorus tribromide, reaction with 1.5-hexadien-3-ol, 41, 50 Phthalic anhydride, reaction with L-phenylalanine to yield N-phthalyl-L-phenylalanine, 40, 82 Phthalic monoperacid, 42, 77 N-Phthalyl-i.-alanine, 40, 84 N-Phthalyl-/3-alanine, 40, 84 N-Phthalylglycine, 40, 84 N-Phthalyl-l-/5-phenylalanine, 40, 82... 

Phosphine oxides, e.g., di-/ -octadecylphosphine oxide, are oxidized to phos-phinic acids by hydrogen peroxide. With chlorine or phosphorus pentachloride, phosphine oxides form dialkylphosphinyl chlorides, R2P(0)C1, which can be easily hydrolyzed to phosphinic acids [162,165] see Eqs. (96) and (97) ... 

A. Nucleophilic Reactions of the P=0 Group.—Tris(trifluoromethyl)-phosphine oxide (33) reacts with hexamethyldisiloxane to give a phos-phorane, whose n.m.r. spectrum at — 140 °C shows non-equivalent trifluoromethyl groups. Although this unusual reaction clearly involves nucleophilic attack of the phosphoryl oxygen on silicon at some stage of the reaction, a full study of the mechanism has not been published. Tertiary phosphine oxides can be converted cleanly into dichlorophos-phoranes (34) by treatment with two moles of phosphorus pentachloride. Alkylation of the sodium salt of tetraphenylmethylenediphosphine dioxide (35) with alkyl halides, in dimethyl sulphoxide, has been reported to... 

When It is heated with magnesium oxide, phosphorus pentachloride incandesces. 

The nitrobenzene/phosphorus pentachloride mixture is stable up to 110°C. Above this temperature there is a decomposition that becomes more and more violent. Nitrogen oxides are also released in large quantities. 

Phosphorus pentachloride See Phosphorus pentachloride Magnesium oxide... 

---