Palladium catalysts arylation

This reaction is highly stereoselective. Cine substitution is known with this reaction, and its mechanism has been studied. Using ArSnCl3 derivatives, Stille coupling can be done in aq. KOH. A related reaction couples reagents with C=C-I Ph reagents, in the presence of a palladium catalyst. Aryl halides and het-... 

By careful selection of the palladium catalyst, aryl trifluoromethanesulfonates can be converted directly to benzoate esters under mild conditions (70 °C, 1 bar CO equation 31). The best catalyst appears to be Pd(OAc)2-l,3-bis(diphenylphosphino)propane and the best solvent DMF. With aromatic compounds bearing electron-withdrawing substituents carbonylations can be carried out under even milder conditions. 

Remarkably, Beller s group developed several novel methodologies for the primary amides synthesis [135-139]. In the presence of palladium catalysts, aryl halides, phenyl triflates, benzyl chlorides and even phenols were transformed into the corresponding primary amides in good to excellent yields. Ammonia gas was used directly as an amine source and also as a base. These were the primary reports on using NH3 and CO for primary amides synthesis (Scheme 2.14). 

Aromatic Aldehydes. Carbon monoxide reacts with aromatic hydrocarbons or aryl haHdes to yield aromatic aldehydes (see Aldehydes). The reaction of equation 24 proceeds with yields of 89% when carried out at 273 K and 0.4 MPa (4 atm) using a boron trifluoride—hydrogen fluoride catalyst (72), whereas conversion of aryl haHdes to aldehydes in 84% yield by reaction with CO + H2 requires conditions of 423 K and 7 MPa (70 atm) with a homogeneous palladium catalyst (73) and also produces HCl. 

They have also developed a route to 2-allenylindole derivatives (98T13929). When prop-2-ynyl carbonates (76) are reacted with 73 in the presence of palladium catalyst, a cross-coupling reaction occurs to give 77a (46%) and 77b (45%). Under a pressurized carbon monoxide atmosphere (10 atm), the palladium-catalyzed reaction of 73 with 78 provides 79a (60%) and 79b (60%) (2000H2201). In a similar reaction, when the substrate is changed to aryl halides (80), 2-aryl-1-methoxyindoles such as 81a (70%) and 81b (60%) are prepared (97H2309). 

Palladium-catalyzed carbon-carbon bond forming reactions like the Suzuki reac-tion as well as the Heck reaction and the Stille reaction, have in recent years gained increased importance in synthetic organic chemistry. In case of the Suzuki reaction, an organoboron compound—usually a boronic acid—is reacted with an aryl (or alkenyl, or alkynyl) halide in the presence of a palladium catalyst. 

Reduction of unsaturated carbonyl compounds to the saturated carbonyl is achieved readily and in high yield. Over palladium the reduction will come to a near halt except under vigorous conditions (73). If an aryl carbonyl compound, or a vinylogous aryl carbonyl, such as in cinnamaldehyde is employed, some reduction of the carbonyl may occur as well. Carbonyl reduction can be diminished or stopped completely by addition of small amounts of potassium acetate (i5) to palladium catalysts. Other effective inhibitors are ferrous salts, such asferroussulfate, at a level of about one atom of iron per atom of palladium. The ferrous salt can be simply added to the hydrogenation solution (94). Homogeneous catalysts are not very effective in hydrogenation of unsaturated aldehydes because of the tendencies of these catalysts to promote decarbonylation. 

The coupling reaction of aryl-alkenyl halides with alkenes in the presence of a palladium catalyst and a base is known as the Heck coupling (Scheme 9.4).6 Since the early 1980s, this type of coupling reaction has been used for die syndiesis of poly(arylenevinylene) and related polymers by polymerization of AB- or AA/BB-type of monomers (Scheme 9.5).7... 

Polymerization using the Stille coupling, the cross-coupling of aryl-alkenyl halides with organotins in the presence of palladium catalysts (Scheme 9.10),13 appeared in 1989 (Scheme 9.11).14 The low nucleophilicity of organotins makes it possible to use functionalized monomers for the polymerization.15... 

At about die same time, die application of the Suzuki coupling, the crosscoupling of boronic acids widi aryl-alkenyl halides in die presence of a base and a catalytic amount of palladium catalyst (Scheme 9.12),16 for step-growth polymerization also appeared. Schliiter et al. reported die synthesis of soluble poly(para-phenylene)s by using the Suzuki coupling condition in 1989 (Scheme 9.13).17 Because aryl-alkenyl boronic acids are readily available and moisture stable, the Suzuki coupling became one of die most commonly used mediods for die synthesis of a variety of polymers.18... 

The Suzuki reaction has been successfully used to introduce new C - C bonds into 2-pyridones [75,83,84]. The use of microwave irradiation in transition-metal-catalyzed transformations is reported to decrease reaction times [52]. Still, there is, to our knowledge, only one example where a microwave-assisted Suzuki reaction has been performed on a quinolin-2(lH)-one or any other 2-pyridone containing heterocycle. Glasnov et al. described a Suzuki reaction of 4-chloro-quinolin-2(lff)-one with phenylboronic acid in presence of a palladium-catalyst under microwave irradiation (Scheme 13) [53]. After screening different conditions to improve the conversion and isolated yield of the desired aryl substituted quinolin-2( lff)-one 47, they found that a combination of palladium acetate and triphenylphosphine as catalyst (0.5 mol %), a 3 1 mixture of 1,2-dimethoxyethane (DME) and water as solvent, triethyl-amine as base, and irradiation for 30 min at 150 °C gave the best result. Crucial for the reaction was the temperature and the amount of water in the... 

In 2003, the microwave-assisted coupUng of aryl hahdes with acetylenes using a palladium catalyst were carried out employing a modified Smith Process vial [49]. These vessels, equipped with a polypropylene frit and screw cap at the bottom, and sealed with an aluminum crimp cap fitted with a silicon septum at the top (Fig. 8), faciUtated the processing of approximately 1 g of solid support. Notably, they are compatible with stirring of the reaction mixture and monitoring of the temperature and pressure. 

PdCl2(PPh3)2 and Cul in a mixture of Et2NH and DMF at 120 °C for 5-25 min were found to be suitable as a general protocol. For less reactive (hetero)aryl bromides and 2-chloropyridine, extra triphenylphosphine was added to improve the stability of the palladium catalyst (Scheme 49). 

A microwave-assisted Cu-catalyzed Sonogashira-type protocol on aryl iodide substrates without the involvement of a palladium catalyst has also been published (Scheme 54) [71]. Reactions were executed using Cut and CS2CO3 in NMP at 195 °C. The application seems to be fairly limited since there are indications that only (hetero)arylacetylenes are suitable coupHng partners for this protocol. In addition, aryl bromides react more sluggishly than aryl iodides. Moreover, even on aryl iodides the reaction times required are on the order of hours. 

If, instead of a palladium catalyst, a nickel catalyst, such as the bipyridylnickel(II) bromide, is used for the arylation of amines (Fig. 7), the reduction of the aryl halide into the corresponding aromatic hydrocarbon is still present for the primary or secondary benzylamines but, the arylation into substituted anilines is the main reaction even most often the only one, for the other types of amines. 

Alkenylboranes (R2C=CHBZ2 Z — various groups) couple in high yields with vinylic, alkynyl, aryl, benzylic, and allylic halides in the presence of tetra-kis(triphenylphosphine)palladium, Pd(PPh3)4, and a base to give R C CHR. 9-Alkyl-9-BBN compounds (p. 1013) also couple with vinylic and aryl halides " as well as with a-halo ketones, nitriles, and esters.Aryl halides couple with ArB(IR2 ) species with a palladium catalyst. ... 

Haloalkynes (R—C=C—X) react with ArSnBu3 and Cul to give R—C= C—Ar. Acetylene reacts with two equivalents of iodobenzene, in the presence of a palladium catalyst and Cul, to give 1,2-diphenylethyne. 1-Trialkylsilyl alkynes react with 1-haloalkynes, in the presence of a CuCl catalyst, to give diynes and with aryl triflates to give 1-aryl alkynes. Alkynes couple with alkyl halides in the presence of Sml2/Sm. Alkynes react with hypervalent iodine compounds " and with reactive alkanes such as adamantane in the presence of AIBN. ... 

---