Palladium adducts

The formation of the 3-phenyl-2-butanone indicates a rearrangement of the intermediate palladium adduct is occurring, since only 3-phenyl-3-buten-2-ol could have been formed by a simple /1-hydride elimination from the 3-phenyl-4-pallado intermediate. It has been shown that the allylic alcohols are stable under the reaction conditions. Therefore, the 3-phenyl-2-butanone probably is being formed by an internal metal hydride elimination-readdition sequence as follows ... 

The details of the cupric salt reaction with the palladium adduct are not clear. Exchange to form a cupric alkyl is one possibility or complex formation,"probably with chloride bridges between the palladium adduct and cupric chloride, may occur with subsequent anion shift from palladium to carbon or perhaps an Sn2 displacement of the complex metal group by an anion may occur. Rearrangements producing 1,3 and 1,4 substituted products from linear olefins have also been observed. For example, 1-butene produced several percent of 1,3- and 1,4-chloro acetates and diacetates under the reaction conditions used 16>. "Hydrido-palladium acetate or chloride" -complexes would seem to be likely intermediates in these arrangements. 

Reference is made in Chapter 3 to the synthesis of C-glycosides from glycal derivatives by use of palladium adducts, and related work leading to 2,3-unsaturated C-nucleosides is reported in Chapter 20. 

Trudell and Nolan have reported that palladium adducts of Arduengo s carbene hgand, l,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) [59], are active catalysts for Suzuki cross-couplings of a wide variety of aryl chlorides with arylboronic acids (Equation 2.33) [60]. 

The cyclohexadiene derivative 130 was obtained by the co-cyclization of DMAD with strained alkenes such as norbornene catalyzed by 75[63], However, the linear 2 1 adduct 131 of an alkene and DMAD was obtained selectively using bis(maleic anhydride)(norbornene)palladium (124)[64] as a cat-alyst[65], A similar reaction of allyl alcohol with DMAD is catalyzed by the catalyst 123 to give the linear adducts 132 and 133[66], Reaction of a vinyl ether with DMAD gives the cyclopentene derivatives 134 and 135 as 2 I adducts, and a cyclooctadiene derivative, although the selectivity is not high[67]. 

Pyrazine 1,4-dioxides are available by the direct self-condensation of 1,2-hydroxyaminooximes (70JOC2790). 1,2-Nitrooximes are obtained by the isomerization of alkene initrogen trioxide adducts, which are reduced with palladium on charcoal to the hydroxyaminooximes which undergo acid-catalyzed auto-condensation to the pyrazine 1,4-dioxides (Scheme 19). 

Examples of perfluoroalkyl iodide addition to the triple bond include free radical addition of perfluoropropyl iodide to 1 -heptyne [28] (equation 21), thermal and free radical-initiated addition of lodoperfluoroalkanesulfonyl fluorides to acetylene [29] (equation 22), thermal addition of perfluoropropyl iodide to hexa-fluoro 2 butyne [30] (equation 23), and palladium-catalyzed addition of per-fluorobutyl iodide to phenylacetylene [31] (equation 24) The E isomers predominate in these reactions Photochemical addition of tnfluoromethyl iodide to vinylacetylene gives predominantly the 1 4 adduct by addition to the double bond [32] Platinum catalyzed addition of perfluorooctyl iodide to l-hexyne in the presence of potassium carbonate, carbon monoxide, and ethanol gives ethyl () per fluorooctyl-a-butylpropenoate [JJ] (equation 25)... 

The intermediacy of dipolar species such as 186 has been demonstrated by reaction of enamines with 2-hydroxy-1-aldehydes of the aromatic series (129). The enamine (113) reacts in benzene solution at room temperature with 2-hydroxy-1-naphthaldehyde to give the crystalline adduct (188) in 91 % yield. Oxidation with chromium trioxide-pyridine of 188 gave 189 with p elimination of the morpholine moiety. Palladium on charcoal dehydrogenation of 189 gave the known 1,2-benzoxanthone (129). 

Dimethyl-1,2,4-triazolium iodide with palladium acetate yields the carbene adduct 182 (97JOM(530)259). Under water it undergoes cis-trans isomerization to 183. Some other derivatives were reported in 1981 (81BCSJ800). 1,1 -Methylenebis(4-alkyl-l,2,4-triazolium)diiodides (alkyl = /-Pr, n-Bu, octyl) with palladium(II) acetate give the mononuclear complexes [L Pdl ] (99EJIC1965), where L2= l,l -methylenebis(4-R-l,2,4-triazol-2-ylidene) (R = /-Pr, n-Bu, octyl). Thermolysis of the products in THF gives the rran -dinuclear complexes 184... 

Due to their successful synthesis of 2-(4 -chlorophenyl)-4-iodoquinoline from the corresponding precursor acetylene, Arcadi et al. (99T13233) developed a one-step synthesis of 2,4-disubstituted quinolines via palladium-catalyzed coupling reactions. An example is the Heck reaction of 4-iodoquinoline (131) with a-acetamidoacrylate (132). This one-pot synthesis yielded adduct 133 in 50% overall yield after purification via flash chromatography. 

Cacchi and Palmier (83T3373) investigated a new entry into the quinoline skeleton by palladium-catalyzed Michael-type reactions. They found that phenyl mercurial 134 was a useful intermediate for the synthesis of quinoline derivatives, and that by selecting the reaction conditions the oxidation level of the heterocyclic ring in the quinoline skeleton can be varied. On such example is shown in Scheme 16. PdCla-catalyzed coupling between organomercurial reagent 134 and enone 135 delivered adduct 136 which was subsequently cyclized to quinoline 137 under acidic conditions. 

The parent TMM precursor (1), now commercially available, has played a pivotal role in the execution of many synthetic plans directed at natural and unnatural targets. Reaction of (1) with 2-(methoxycarbonyl)cyclohexenone (14, R=C02Me) in the presence of palladium acetate and triethyl phosphite produced the adduct (15) in near quantitative yield. This cycloadduct is a critical intermediate in the total synthesis of a hydroxykempenone (16), a component of the defensive substances secreted by termites (Scheme 2.5) [12]. In accord with a previous observation by Trost that unactivated 2-cyclohexenone reacts poorly with TMM-Pd [13], the substrate (14, R=Me) was essentially inert in the cycloaddition. 

Reaction of the cyclopropyl-substituted pivalate (25) with dimethyl benzylidenema-lonate in the presence of a palladium catalyst gave a mixture of alkylidenecyclo-propane (26) and vinylcyclopropane (27). The ratio of these two adducts is found to be quite sensitive to the choice of ligand and solvent. While triisopropyl phosphite favors the formation of the methylenecyclopropane (26), this selectivity is completely reversed with the use of the bidentate phosphite ligand dptp (12). Interestingly there was no evidence for any products that would have derived from the ring opening of the cyclopropyl-TMM intermediate (Scheme 2.8) [18]. 

Intramolecular cycloadditions of substrates with a cleavable tether have also been realized. Thus esters (37a-37d) provided the structurally interesting tricyclic lactones (38-43). It is interesting to note that the cyclododecenyl system (w = 7) proceeded at room temperature whereas all others required refluxing dioxane. In each case, the stereoselectivity with respect to the tether was excellent. As expected, the cyclohexenyl (n=l) and cycloheptenyl (n = 2) gave the syn adducts (38) and (39) almost exclusively. On the other hand, the cyclooctenyl (n = 3) and cyclododecenyl (n = 7) systems favored the anti adducts (41) and (42) instead. The formation of the endocyclic isomer (39, n=l) in the cyclohexenyl case can be explained by the isomerization of the initial adduct (44), which can not cyclize due to ring-strain, to the other 7t-allyl-Pd intermediate (45) which then ring-closes to (39) (Scheme 2.13) [20]. While the yields may not be spectacular, it is still remarkable that these reactions proceeded as well as they did since the substrates do contain another allylic ester moiety which is known to undergo ionization in the presence of the same palladium catalyst. 

The acetate (1) and its mosylate analog (79) have been shown to undergo cydoad-dition with the CN double bond of alkyl imines to generate substituted pyrrolidines in the presence of nickel or palladium catalyst [35]. For example, both the phenyl imine (80) and the diazene (81) gave reasonable yields of adducts (82) and (83) respectively (Scheme 2.23). 

There is significant metal-metal bonding in the platinum compound, whose geometry involves a square of platinum atoms another important difference is that the coordination geometry is square planar in palladium acetate but octahedral in the platinum analogue. Different oligomers exist in solution, broken down by adduct formation. Palladium(II) acetate may be obtained as brown crystals from the following reaction [65] ... 

Reaction of the diphosphines Ph2P(CH2) PPh2 (n = 1-3) with MCl2(PhCN)2 affords 1 1 m-complexes (Figure 3.46) [102]. (Note the use of the labile PhCN adducts if the MCl salts are used, Magnus type compounds M(P-P)2+MCl4- are formed.) Similar complexes are formed with other halides for the thiocyanates see section 3.8.6. The structures of the palladium complexes have been determined (Table 3.10) with square coordination only achieved for n = 3 with the formation of a six-membered metal-chelate ring. 

Other examples that involve intermediate allyl cations are illustrated in Scheme 1.4. The cationic palladium(II) complex [Pd(dppp)(PhCN)2](BF4)2 coordinates the carbonyl oxygen of benzaldehyde and the activated carbonyl carbon attacks the isoprene, forming the allyl cation 10 which then cyclizes to give the 4-methyl-6-phenyl-5,6-dihydro-2H-pyran [22]. 2-Oxopropyl acrylate 11, in the presence of trimethylsilyltrifluoromethane sulfonate (TMSOTf) and methoxytrimethylsilane (MeOSMT), generates the cation 11a which is an efficient dienophile that reacts easily with the cyclohexadiene to give the Diels-Alder adduct in good yield [23]. 

Palladium(II) acetate reacts with N,N, N"-triphenylguanidine ( = HTpg) in warm benzene to form a bis-adduct which, under more forcing conditions, converts to the novel dinuclear guanidinate-bridged complex [Pd(/L-Tpg)... 

NMR monitoring of the reaction of the palladium complex with 1-octyne suggested that the alkyne inserts into the Pd-H bond. Further heating produced a mixture of the two regioisomeric alkenylphosphine oxides, the anti-Markovnikov adduct being the favored product (54 46, 65% yield). 

This reaction typifies the two possibilities of reaction routes for M-catalyzed addition of an S-X (or Se-X) bond to alkyne (a) oxidative addition of the S-X bond to M(0) to form 94, (b) insertion of alkyne into either the M-S or M-X bond to provide 95 or 96 (c) C-X or C-S bond-forming reductive elimination to give 97 (Scheme 7-21). Comparable reaction sequences are also discussed when the Chalk-Harrod mechanism is compared with the modified Chalk-Harrod mechanism in hydrosily-lations [1,3]. The palladium-catalyzed thioboratiori, that is, addition of an S-B bond to an alkyne was reported by Miyaura and Suzuki et al. to furnish the cis-adducts 98 with the sulfur bound to the internal carbon and the boron center to the terminal carbon (Eq. 7.61) [62]. 

The palladium-catalyzed addition of Se-Si ( silylselenatiori) and Se-Ge bonds to phenyl acetylene was also reported to provide cis-adducts 112 in 25% and 35% yields, respectively (Eq. 7.65) [65]. 

---