P-hydride elimination reactions

Such reactions are generally reversible, the backwards process leading to elimination of a ligand. The reverse of alkene insertion is the p-hydride elimination reaction referred to above. 

Theoretically, it is possible for the process of olefin coordination and insertion to continue as in Ziegler-Natta polymerization (Chapter 52) but with palladium the metal is expelled from the molecule by a p-hydride elimination reaction and the product is an alkene. For the whole process to be catalytic, a palladium(O) complex must be regenerated from the palladium(ll) product of P-hydride elimination. This occurs in the presence of base which removes HX from the palladium(II) species. 

Scheme 4 Five-coordinate intermediates in P-hydride elimination reactions from Pt(IV) [23]...

The initially formed tetra-alkylferrate(II) represents the reactive intermediate in both reactions that undergoes a carboferration of the triple bond in eq. 2, Scheme 29. Transmetallation from Fe to Mg yields a vinyl-magnesium species, which liberates the desired olefin upon hydrolysis within the acidic work-up procedure. In the above two reactions, a competing p-hydride elimination from the ferrate yields the unreactive Fe-H species and hence is considered to be the deactivation step in the catalytic cycle. 

Transfer hydrogenation of aldehydes with isopropanol without addition of external base has been achieved using the electronically and coordinatively unsaturated Os complex 43 as catalyst. High turnover frequencies have been observed with aldehyde substrates, however the catalyst was very poor for the hydrogenation of ketones. The stoichiometric conversion of 43 to the spectroscopically identifiable in solution ketone complex 45, via the non-isolable complex 44 (Scheme 2.4), provides evidence for two steps of the operating mechanism (alkoxide exchange, p-hydride elimination to form ketone hydride complex) of the transfer hydrogenation reaction [43]. 

The Mizoroki-Heck reaction is a metal catalysed transformation that involves the reaction of a non-functionalised olefin with an aryl or alkenyl group to yield a more substituted aUcene [11,12]. The reaction mechanism is described as a sequence of oxidative addition of the catalytic active species to an aryl halide, coordination of the alkene and migratory insertion, P-hydride elimination, and final reductive elimination of the hydride, facilitated by a base, to regenerate the active species and complete the catalytic cycle (Scheme 6.5). 

Both Ni and Pd reactions are proposed to proceed via the general catalytic pathway shown in Scheme 8.1. Following the oxidative addition of a carbon-halogen bond to a coordinatively unsaturated zero valent metal centre (invariably formed in situ), displacement of the halide ligand by alkoxide and subsequent P-hydride elimination affords a Ni(II)/Pd(ll) aryl-hydride complex, which reductively eliminates the dehalogenated product and regenerates M(0)(NHC). ... 

Silyl(pinacol)borane (88) also adds to terminal alkenes in the presence of a coordinate unsaturated platinum complex (Scheme 1-31) [132]. The reaction selectively provides 1,2-adducts (97) for vinylarenes, but aliphatic alkenes are accompanied by some 1,1-adducts (98). The formation of two products can be rationalized by the mechanism proceeding through the insertion of alkene into the B-Pt bond giving 99 or 100. The reductive elimination of 97 occurs very smoothly, but a fast P-hydride elimination from the secondary alkyl-platinum species (100) leads to isomerization to the terminal carbon. 

This new impurity proved to be derived from the Pd-catalyzed oxidation of DIPA to the enamine via P-hydride elimination. In fact, mixing Pd(OAc)2 with DIPA in DMF-d7 readily formed Pd black along with two species, primary amine and acetone, presumably derived from the enamine through hydrolysis. The resulting enamine or acetone then underwent a coupling reaction with iodoaniline 28. Heterocyclization through the arylpalladium(II) species provided 2-methyl indole 71, as shown in Scheme 4.19. 

A catalyst used for the u-regioselective hydroformylation of internal olefins has to combine a set of properties, which include high olefin isomerization activity, see reaction b in Scheme 1 outlined for 4-octene. Thus the olefin migratory insertion step into the rhodium hydride bond must be highly reversible, a feature which is undesired in the hydroformylation of 1-alkenes. Additionally, p-hydride elimination should be favoured over migratory insertion of carbon monoxide of the secondary alkyl rhodium, otherwise Ao-aldehydes are formed (reactions a, c). Then, the fast regioselective terminal hydroformylation of the 1-olefin present in a low equilibrium concentration only, will lead to enhanced formation of n-aldehyde (reaction d) as result of a dynamic kinetic control. 

At the present, it is difficult to predict a distinct rhodium catalyst showing the appropriate properties. Furthermore, the reaction conditions applied will influence the outcome of the reaction also. Low carbon monoxide pressure favours p-hydride elimination by enhanced CO dissociation which allows for the formation of vacant sites at the metal... 

An additional prerequisite in this reaction, however, is inhibition of a premature P-hydrogen elimination. Reaction of 6/4-56 and 6/4-57 led to 6/4-58 with 41 % yield. Again, one can assume that first a Ni-complex 6/4-59 is formed, which gives the bicyclic 6/4-60 followed by formation of the triquinane skeleton 6/4-58 via 6/4-61 with a P-hydride elimination being the last step (Scheme 6/4.15). 

The branched polymers produced by the Ni(II) and Pd(II) a-diimine catalysts shown in Fig. 3 set them apart from the common early transition metal systems. The Pd catalysts, for example, are able to afford hyperbranched polymer from a feedstock of pure ethylene, a monomer which, on its own, offers no predisposition toward branch formation. Polymer branches result from metal migration along the chain due to the facile nature of late metals to perform [3-hydride elimination and reinsertion reactions. This process is similar to the early mechanism proposed by Fink briefly mentioned above [18], and is discussed in more detail below. The chain walking mechanism obviously has dramatic effects on the microstructure, or topology, of the polymer. Since P-hydride elimination is less favored in the Ni(II) catalysts compared to the Pd(II) catalysts, the former system affords polymer with a low to moderate density of short-chain branches, mostly methyl groups. 

Syntheses of isolable organometallic species by carbometallations of alkenes are difficult because many side reactions can occur, namely p-hydride elimination and chain propagation. As a consequence, only a few examples have been reported to date, mainly concerning reactions in which the initial carboalumination product is trapped through fast intra-... 

This special feature arises from the combination of the transition metal behavior such as the coordination of a carbon-carbon multiple bond, oxidative addition, reductive elimination, P-hydride elimination, addition reactions and the behavior of classical c-carbanion towards electrophiles. 

In fact, a mechanism for this reaction can be drawn that does not involve Pd at all, but let s assume that Pd is required for it to proceed. Cl- must be nucleophilic. It can add to Cl of the alkyne if the alkyne is activated by coordination to Pd(II). (Compare Hg-catalyzed addition of water to alkynes.) Addition of Cl- to an alkyne-Pd(II) complex gives a o-bound Pd(II) complex. Coordination and insertion of acrolein into the C2-Pd bond gives a new a-bound Pd(II) complex. In the Heck reaction, this complex would undergo P-hydride elimination, but in this case the Pd enolate simply is protonated to give the enol of the saturated aldehyde. 

The catalytic Pd complex and the aryl bromide together suggest the first step is oxidative addition of Pd(0) to the C5-Br bond. (The reduction of Pd(II) to Pd(0) can occur by coordination to the amine, p-hydride elimination to give a Pd(II)-H complex and an iminium ion, and deprotonation of Pd(IE)-H to give Pd(0).) The C10-C11 k bond can then insert into the C5-Pd bond to give the C5-C10 bond. P-Hydride elimination then gives the Cl 1-C12 n bond and a Pd(II)-H, which is deprotonated by the base to regenerate Pd(0). The overall reaction is a Heck reaction. 

Two mechanisms have been put forward, one involving P-hydride elimination and migratory insertion reactions, and the other one involving a direct, concerted transfer of the two hydrogen atoms from the alcohol donor to the reactive intermediate complex and vice versa donation to the ketone. Both pathways assume a heterolytic character for the overall transfer this is to say... 

For entries 3-5 the increase in molecular weight observed can be assigned to the increase in the rate of insertion and the rate of termination remains practically the same. An increase of the rate of polymerisation with the steric bulk of the ligand is usually ascribed to the destabilisation of the alkene adduct while the energy of the transition state remains the same. As a chain transfer reaction presumably P-hydride elimination takes place or traces of water might be chain transfer agents. Chain transfer does occur, because a Schulz-Flory molecular weight distribution is found (PDI 2, see Table 12.2). Shorter chains are obtained with a polar ortho substituent (OMe, entry 2) and in methanol as the solvent, albeit that most palladium is inactive in the latter case. 

It is important to note that in methanol as the solvent the reaction is much slower and also the molecular weight is much lower. Apparently a major part of the palladium complex occurs in an inactive state and the termination reaction is relatively accelerated by methanol. This suggests that ester formation is the dominant chain transfer mechanism in methanol, although P-hydride elimination will still occur. 

---