Oxidant potassium permanganate, oxidizing

Isobutyl alcohol, isobutanol, 2-methyl-propanol, isopropyl carbinol, Me2CHCH20H. B.p. 108°C. Occurs in fusel-oil. Oxidized by potassium permanganate to 2-methyl-propanoic acid dehydrated by strong sulphuric acid to 2-methylpropene. 

Colourless prisms m.p. 130 C. Manufactured by treating maleic anhydride with water. It is converted to the anhydride by heating at By prolonged heating at 150 "C or by heating with water under pressure at 200 C, it is converted to the isomeric (trans) fumaric acid. Reduced by hydrogen to succinic acid. Oxidized by alkaline solutions of potassium permanganate to mesotartaric acid. When heated with solutions of sodium hydroxide at 100 C, sodium( )-malate is formed. Used in the preparation of ( )-malic acid and in some polymer formulations. 

By oxidation of primary alcohols with alkaline potassium permanganate solution or with a dichromate and dilute sulphuric add, for example ... 

The position of the triple bond is established by oxidation of the latter by means of alkaline potassium permanganate solution to sebacic acid, H02C(CH2)gC0jH, m.p. 133°. 

Oxidation of 10-undecynoic acid to sebacic acid. Dissolve 2 00 g. of the acid, m.p. 41-42°, in 50 ml. of water containing 0 -585 g. of pure anhydrous sodium carbonate. Saturate the solution with carbon dioxide and add O IN potassium permanganate solution (about 1500 ml.) slowly and with constant stirring until the pink colour remains for half an hour the addition occupies about 3 hours. Decolourise the solution with a httle sulphur dioxide and filter off the precipitated acid through a... 

Oxidation of side chains. Aromatic nitro compounds that contain a side chain (e.g., nitro derivatives of alkyl benzenes) may be oxidised to the corresponding acids either by alkahne potassium permanganate (Section IV,9, 6) or, preferably, with a sodium dichromate - sulphuric acid mixture in which medium the nitro compound is more soluble. 

Nicotinic acid is prepared in good tdeld by the oxidation of p picollne with potassium permanganate ... 

Ketones are oxidized by potassium permanganate or by sodium hypochlorite (91) in aqueous solution to the corresponding acids. For example, oxidation of 5-acetylthiazole with aqueous KMnO at 70°C gives 5-thia-zolecarboxylic acid. 

A compound was obtained from a natural product and had the molecular formula C14H20O3 It contained three methoxy (—OCH3) groups and a —CH2CH=C(CH3)2 substituent Oxidation with either chromic acid or potassium permanganate gave 2 3 5 trimethoxybenzoic acid What is the structure of the compound" ... 

Pellagra is a disease caused by a deficiency of niacm (C6FI5NO2) in the diet Niacin can be synthesized in the laboratory by the side chain oxidation of 3 methylpyndine with chromic acid or potassium permanganate Suggest a reasonable structure for niacin... 

Potassium permanganate (KMn04) will also oxidize pri mary alcohols to carboxylic acids What is the oxidation state of manganese in KMn04 ... 

Oxidation of aldehydes (Section 17 15) Aldehydes are particularly sensitive to oxidation and are converted to carboxylic acids by a number of oxidizing agents in eluding potassium permanganate and chromic acid... 

Perfluoroepoxides have also been prepared by anodic oxidation of fluoroalkenes (39), the low temperature oxidation of fluoroalkenes with potassium permanganate (40), by addition of difluorocarbene to perfluoroacetyl fluoride (41) or hexafluoroacetone (42), epoxidation of fluoroalkenes with oxygen difluoride (43) or peracids (44), the photolysis of substituted l,3-dioxolan-4-ones (45), and the thermal rearrangement of perfluorodioxoles (46). 

Sahcylaldehyde is readily oxidized, however, to sahcyhc acid by reaction with solutions of potassium permanganate, or aqueous silver oxide suspension. 4-Hydroxybenzaldehyde can be oxidized to 4-hydroxybenzoic acid with aqueous silver nitrate (44). Organic peracids, in basic organic solvents, can also be used for these transformations into benzoic acids (45). Another type of oxidation is the reaction of sahcylaldehyde with alkaline potassium persulfate, which yields 2,5-dihydroxybenzaldehyde (46). 

The fermentation-derived food-grade product is sold in 50, 80, and 88% concentrations the other grades are available in 50 and 88% concentrations. The food-grade product meets the Vood Chemicals Codex III and the pharmaceutical grade meets the FCC and the United States Pharmacopoeia XK specifications (7). Other lactic acid derivatives such as salts and esters are also available in weU-estabhshed product specifications. Standard analytical methods such as titration and Hquid chromatography can be used to determine lactic acid, and other gravimetric and specific tests are used to detect impurities for the product specifications. A standard titration method neutralizes the acid with sodium hydroxide and then back-titrates the acid. An older standard quantitative method for determination of lactic acid was based on oxidation by potassium permanganate to acetaldehyde, which is absorbed in sodium bisulfite and titrated iodometricaHy. 

Two oxidants commonly used are chlorine and potassium permanganate. The Roe chlorine number, the uptake of gaseous chlorine by a known weight of unbleached pulp (ie. Technical Association of the Pulp and Paper Industry (TAPPl) Standard Method T202 ts-66) has been superseded by the simpler hypo number (ie, TAPPl Official Test Method T253 om-86), eg, chlorine consumption in treatment of the pulp with acidified sodium or calcium hypochlorite. 

---