Organically bound

This removal may also include diffusion of soluble U(VI) from seawater into the sediment via pore water. Uranium-organic matter complexes are also prevalent in the marine environment. Organically bound uranium was found to make up to 20% of the dissolved U concentration in the open ocean." ° Uranium may also be enriched in estuarine colloids and in suspended organic matter within the surface ocean. " Scott" and Maeda and Windom" have suggested the possibility that humic acids can efficiently scavenge uranium in low salinity regions of some estuaries. Finally, sedimentary organic matter can also efficiently complex or adsorb uranium and other radionuclides. 

In the case of nuclear fission in the presence of iodobenzene and a- or jS-iodonaphthalene, despite thenumerous possible diiodo compounds, one finds about 90% of the organically bound I atoms in molecules with the original configuration ... 

Mesocosms placed in shallow Finnish lakes were used to evaluate changes brought about by extended incubation of biologically treated bleachery effluent from mills that used chloride dioxide. The mesocosms had a volume of ca. 2 m and were constructed of translucent polyethere or black polyethene to simulate dark reactions. The experiments were carried out at ambient temperatures throughout the year, and sum parameters were used to trace the fate of the organically bound chlorine. In view of previous studies on the molecular mass distribution of effluents (Jokela and Salkinoja-Salonen 1992), this was measured as an additional marker. Important featmes were that (a) sedimentation occurred exclusively within the water mass within the mesocosm, (b) the atmospheric input could be estimated... 

The atmospheric input of organically bound halogen was negligible compared with that of the effluent. 

Thorium is a highly insoluble element, mainly carried in the particulate form in river waters. This is well shown by Th data for the MacKenzie river (Vigier et al. 2001) and for the Kalix river (Andersson et al. 1995 Porcelli et al. 2001) in both cases, more than 95% of Th is carried by >0.45 pm particles. An important part of this Th is included within detrital material. This is illustrated by sequential extractions performed on sediments from the Witham river (Plater et al. 1992), which show the very low amount of Th in ion-exchangeable and organic-bound fractions compared to Th in Fe-Mn oxides... 

Denmark 1.5 days after the explosion. Air samples collected at Roskilde, Denmark on April 27-28, contained a mean air concentration of 241Am of 5.2 pBq/m3 (0.14 fCi/m3). In May 1986, the mean concentration was 11 pBq/m3 (0.30 fCi/m3) (Aarkrog 1988). Whereas debris from nuclear weapons testing is injected into the stratosphere, debris from Chernobyl was injected into the troposphere. As the mean residence time in the troposphere is 20-40 days, it would appear that the fallout would have decreased to very low levels by the end of 1986. However, from the levels of other radioactive elements, this was not the case. Sequential extraction studies were performed on aerosols collected in Lithuania after dust storms in September 1992 carried radioactive aerosols to the region from contaminated areas of the Ukraine and Belarus. The fraction distribution of241 Am in the aerosol samples was approximately (fraction, percent) organically-bound, 18% oxide-bound, 10% acid-soluble, 36% and residual, 32% (Lujaniene et al. 1999). Very little americium was found in the more readily extractable exchangeable and water soluble and specifically adsorbed fractions. 

Principles and Characteristics Combustion analysis is used primarily to determine C, H, N, O, S, P, and halogens in a variety of organic and inorganic materials (gas, liquid or solid) at trace to per cent level, e.g. for the determination of organic-bound halogens in epoxy moulding resins, halogenated hydrocarbons, brominated resins, phosphorous in flame-retardant materials, etc. Sample quantities are dependent upon the concentration level of the analyte. A precise assay can usually be obtained with a few mg of material. Combustions are performed under controlled conditions, usually in the presence of catalysts. Oxidative combustions are most common. The element of interest is converted into a reaction product, which is then determined by techniques such as GC, IC, ion-selective electrode, titrime-try, or colorimetric measurement. Various combustion techniques are commonly used. 

The total-chlorine method for determining residues of benzene hexachloride, chlordan, and toxaphene has also been used 55) in experiments where it was known that these insecticides had been applied. With benzene hexachloride, which is known to give off-flavor to some crops, it has not been demonstrated that a relation between organic chlorine values and off-flavor exists. In fact, in most cases where off-flavor was attributed to benzene hexachloride, it has not been possible to detect organically bound chlorine. 

Table II. Fractionation of Organically Bound Chlorine Excreted in Urine of Chlordan-...

Determination of organically bound chlorine is shown to be in general agreement with fly mortality tests of insecticide residues in agricultural products. Alfalfa hay that had received applications of toxaphene and beef fat from animals fed alfalfa hay containing toxaphene residues or sprayed with benzene hexa-chloride or DDT were used for tests. 

Colorimetric methods (3, 6-10), some of which are specific, have been developed for the determination of DDT in small amounts. For benzene hexachloride (hexachloro-cyclohexane), chlordan, and toxaphene, however, specific analytical methods have not been developed, and their residues have been evaluated by the determination of organically bound chlorine. The procedure comprises extraction of the insecticide residue from the sample with benzene or other suitable organic solvent, evaporation of the solvent, treatment of the residue with isopropyl alcohol and metallic sodium, and finally determination by standard methods of the amount of chloride ion formed. 

Solvent extraction shows effectiveness in the removal of organic wastes such as PCBs, VOCs, halogenated solvents, and petroleum wastes, but is less effective in removing inorganic compounds.39 The removal of organic contaminants depends on the nature of the extracting solvent. Organic bound metals can become a constituent of the concentrated waste, which is undesirable because it can restrict both disposal and recycle options. 

The thermal desorption process could be an excellent first step in soil treatment if used in conjunction with another ex situ treatment. Thermal desorption can remove TCE, most diesel fuel, and perhaps organically bound lead. Chemical Waste Management, Inc., has claimed that thermal desorption can reduce volatile organics to less than 1 mg/L and inorganics to less than 10 mg/L (sometimes even to less than 1 mg/L), and has shown a removal of 96 to 99+% of PCBs from soils containing 120 to 6000 mg/L of initial PCBs.17-91... 

Fuel NO. Organically bound nitrogen in fuel reacts with oxygen to form NO. 

Organically bound matter (OM). Heavy metals/trace elements may be bound in living organisms, detritus, and organic matter of the soil. The organically bound trace elements or heavy metals are affected by the production and decomposition of organic matter. 

The cumulative sums of selected major and trace metals extracted by the two SSD procedures from representative arid-zone soils are shown in Fig. 4.6. As can be seen from the figure, the Rehovot procedure is stronger in attacking desired fractions, such as the carbonate bound, Mn oxide bound and organically bound fractions. Extraction of certain major elements, indicating selectivity, specificity and completeness of extraction of given soil components, was found to differ between the two procedures. Calcium and Mg were more completely extracted from the carbonate fraction in arid zone soils by the Rehovot procedure. Calcium and relevant trace elements bound in the carbonate fraction, which were not completely dissolved by the Bonn procedure at this step, were released at the following steps, such as the ERO, OM or RO fractions. 

The sulfides of trace elements in soils and sediments are also of importance in controlling the availability and mobility of trace elements, especially for land disposal of sulfide-rich sediments or anaerobic digested sludge. Due to the oxic nature in arid soils, most of the sulfur is present as sulfate thus, this problem may not be pressing. In most current SSD schedules, the majority of the sulfide forms are included in the organic bound or residual fractions. 

---