Organic compounds osmium compound

Organic compounds, 322 Osmium, oxidation numbers, 414 Oswald, W., 65... 

Other examples are the use of osmium(VIII) oxide (osmium tetroxide) as catalyst in the titration of solutions of arsenic(III) oxide with cerium(IV) sulphate solution, and the use of molybdate(VI) ions to catalyse the formation of iodine by the reaction of iodide ions with hydrogen peroxide. Certain reactions of various organic compounds are catalysed by several naturally occurring proteins known as enzymes. 

The most successful class of active ingredient for both oxidation and reduction is that of the noble metals silver, gold, ruthenium, rhodium, palladium, osmium, iridium, and platinum. Platinum and palladium readily oxidize carbon monoxide, all the hydrocarbons except methane, and the partially oxygenated organic compounds such as aldehydes and alcohols. Under reducing conditions, platinum can convert NO to N2 and to NH3. Platinum and palladium are used in small quantities as promoters for less active base metal oxide catalysts. Platinum is also a candidate for simultaneous oxidation and reduction when the oxidant/re-ductant ratio is within 1% of stoichiometry. The other four elements of the platinum family are in short supply. Ruthenium produces the least NH3 concentration in NO reduction in comparison with other catalysts, but it forms volatile toxic oxides. 

The oxidative cleavage of C=C bond is a common type of reaction encountered in organic synthesis and has played a historical role in the structural elucidation of organic compounds. There are two main conventional methods to oxidatively cleave a C=C bond (1) via ozonol-ysis and (2) via oxidation with high-valent transition-metal oxidizing reagents. A more recent method developed is via the osmium oxide catalyzed periodate oxidative cleavage of alkenes. All these methods can occur under aqueous conditions. 

Heterometal alkoxide precursors, for ceramics, 12, 60-61 Heterometal chalcogenides, synthesis, 12, 62 Heterometal cubanes, as metal-organic precursor, 12, 39 Heterometallic alkenes, with platinum, 8, 639 Heterometallic alkynes, with platinum, models, 8, 650 Heterometallic clusters as heterogeneous catalyst precursors, 12, 767 in homogeneous catalysis, 12, 761 with Ni—M and Ni-C cr-bonded complexes, 8, 115 Heterometallic complexes with arene chromium carbonyls, 5, 259 bridged chromium isonitriles, 5, 274 with cyclopentadienyl hydride niobium moieties, 5, 72 with ruthenium—osmium, overview, 6, 1045—1116 with tungsten carbonyls, 5, 702 Heterometallic dimers, palladium complexes, 8, 210 Heterometallic iron-containing compounds cluster compounds, 6, 331 dinuclear compounds, 6, 319 overview, 6, 319-352... 

Phillips and Timms [599] described a less general method. They converted germanium and silicon in alloys into hydrides and further into chlorides by contact with gold trichloride. They performed GC on a column packed with 13% of silicone 702 on Celite with the use of a gas-density balance for detection. Juvet and Fischer [600] developed a special reactor coupled directly to the chromatographic column, in which they fluorinated metals in alloys, carbides, oxides, sulphides and salts. In these samples, they determined quantitatively uranium, sulphur, selenium, technetium, tungsten, molybdenum, rhenium, silicon, boron, osmium, vanadium, iridium and platinum as fluorides. They performed the analysis on a PTFE column packed with 15% of Kel-F oil No. 10 on Chromosorb T. Prior to analysis the column was conditioned with fluorine and chlorine trifluoride in order to remove moisture and reactive organic compounds. The thermal conductivity detector was equipped with nickel-coated filaments resistant to corrosion with metal fluorides. Fig. 5.34 illustrates the analysis of tungsten, rhenium and osmium fluorides by this method. 

Despite the development in recent years of new reagents for organic synthesis, osmium tetroxide, used either stoichiometrically or catalytically, remains the reagent of choice for syn hydroxylation of al-kenes. Surprisingly, the hydroxylation of alkynes to give - 425 1,2-dicarbonyl compounds has been much less studied, but it has considerable potential for use in the synthesis of complex molecules. 

Sodium chlorate, NaC103 potassium chlorate, KCI03 silver chlorate, AgCIOj and barium chlorate, Ba(CIOj)2, oxidize organic compounds only in the presence of catalysts, usually osmium tetroxide [310, 714, 715, 716, 718] or vanadium pentoxide [716, 718]. Because such oxidations do not occur without catalysts, it is likely that the real oxidants are osmium tetroxide and vanadium pentoxide, respectively, and that the function of the chlorates is reoxidation. 

The emission lifetimes of the bipy and phen complexes of ruthenlum(II) at 77°K are generally in the range t = 0.5-10 ps. (Table 7). Since these values are intermediate to those generally observed for the fluorescence and phosphorescence of organic compounds, the radiative transition in the ruthenium complexes was suggested to be a heavy-atom perturbed spin-forbidden process (168,169). From a determination of the absolute quantum yields as well as lifetimes of a series of ruthenium(II) and osmium(II) complexes, the associated radiative lifetimes were calculated (170). The variations in these inherent lifetimes within the series could be rationalized with a semi-emipirical spin-orbit coupling model thus affording further evidence that the radiative transitions are formally spin forbidden in these systems. 

Bis-bipyridine-silver complexes were found to catalyze the B-Z (with malonic acid as substrate) reaction by Kuhnert and Pehl (1981-1). The reaction was shown to proceed in a heterogeneous medium due to the insolubility of the silver complexes. When organic compounds such as citric acid and 2,4-pentanedione, ethylacetoacetate and racemic malic acid were used as substrates, the oscillatory behavior was not observed. Kuhnert and Pehl (1981-2) also observed that the bipyridine complexes of chromium and osmium catalyze the B-Z reaction. 

---