Organic compounds amides

When amines are not in water solution, they can react with organic acids to produce another class of organic compounds. Amides are formed by the reaction of organic acids with ammonia or primary or secondary amines ... 

Many valuable organic compounds are also prepared by cyclocarbonylation reactions of organic compounds. Amides of unsaturated acids react with CO to give imides for example, the amide of acrylic acid gives the imide of succinic acid (succinimide) see equation (13.129). 

The Soda- lime Test. Certain classes of nitrogenous organic compounds (e.g., amides, etc.) evolve ammonia when heated with soda-lime. In view of the limited application of this test, however, it may well be reserved for Section 3, where it is included with other compounds reacting with soda-lime. 

Sodium and potassium hydroxides. The use of these efficient reagents is generally confined to the drying of amines (soda lime, barium oxide and quicklime may also be employed) potassium hydroxide is somewhat superior to the sodium compound. Much of the water may be first removed by shaking with a concentrated solution of the alkali hydroxide. They react with many organic compounds (e.g., acids, phenols, esters and amides) in the presence of water, and are also soluble in certain organic liquids so that their use as desiccants is very limited... 

Given a nitrogen containing organic compound such as an amide a nitnle or a nitro compound how is the correct oxidation state of the desired amine to be achieved" ... 

Hydrazinium salts, N2H5 X, are acids in anhydrous hydrazine, metallic hydrazides, N2H, are bases. Neutralization in this solvent system involves the hydrazinium and hydrazide ions and is the reverse of equation 7. Metal hydrazides, formally analogous to the metal amides, are prepared from anhydrous hydrazine and the metals as well as from metal amides, alkyls, or hydrides. (The term hydrazide is also used for organic compounds where the carboxyUc acid OH is substituted with a N2H2.) Sodium hydrazide [13598-47-5] is made from sodium or, more safely, from sodium amide (14) ... 

Other Applications. Hydroxylamine-O-sulfonic acid [2950-43-8] h.2is many applications in the area of organic synthesis. The use of this material for organic transformations has been thoroughly reviewed (125,126). The preparation of the acid involves the reaction of hydroxjlamine [5470-11-1] with oleum in the presence of ammonium sulfate [7783-20-2] (127). The acid has found appHcation in the preparation of hydra2ines from amines, aUphatic amines from activated methylene compounds, aromatic amines from activated aromatic compounds, amides from esters, and oximes. It is also an important reagent in reductive deamination and specialty nitrile production. 

Many other reactions of ethylene oxide are only of laboratory significance. These iaclude nucleophilic additions of amides, alkaU metal organic compounds, and pyridinyl alcohols (93), and electrophilic reactions with orthoformates, acetals, titanium tetrachloride, sulfenyl chlorides, halo-silanes, and dinitrogen tetroxide (94). 

Ethers, esters, amides and imidazolidines containing an epithio group are said to be effective in enhancing the antiwear and extreme pressure peiformance of lubricants. Other uses of thiiranes are as follows fuel gas odorant (2-methylthiirane), improvement of antistatic and wetting properties of fibers and films [poly(ethyleneglycol) ethers of 2-hydroxymethyl thiirane], inhibition of alkene metathesis (2-methylthiirane), stabilizers for poly(thiirane) (halogen adducts of thiiranes), enhancement of respiration of tobacco leaves (thiirane), tobacco additives to reduce nicotine and to reduce phenol levels in smoke [2-(methoxymethyl)thiirane], stabilizers for trichloroethylene and 1,1,1-trichloroethane (2-methylthiirane, 2-hydroxymethylthiirane) and stabilizers for organic compounds (0,0-dialkyldithiophosphate esters of 2-mercaptomethylthiirane). The product of the reaction of aniline with thiirane is reported to be useful in the flotation of zinc sulfide. 

Amides are stable compounds. The lower-melting members (such as acetamide) can be readily purified by fractional distillation. Most amides are solids which have low solubilities in water. They can be recrystallised from large quantities of water, ethanol, ethanol/ether, aqueous ethanol, chloroform/toluene, chloroform or acetic acid. The likely impurities are the parent acids or the alkyl esters from which they have been made. The former can be removed by thorough washing with aqueous ammonia followed by recrystallisation, whereas elimination of the latter is by trituration or recrystallisation from an organic solvent. Amides can be freed from solvent or water by drying below their melting points. These purifications can also be used for sulfonamides and acid hydrazides. 

A variety of commercial kits and automated systems are available to test the abilities of bacteria to assimilate, ferment, decarboxylate, or cleave selected organic compounds.46 Their reliability for species identification is usually greater with cultures from clinical samples, where a limited number of bacteria are commonly encountered, and less with environmental soil and water samples, where a great many uncommon or previously unidentified species not in the database are likely to be present.29,45 Additional tests beyond those found in the commercial kits may be necessary for example, the hydrolysis of various nitriles and amides is useful for identifying Rhodococcus spp.47 Some commercial kits for clinical use feature antimicrobial susceptibility testing.21... 

The transition metal-catalyzed C-H insertion reaction of carbenes to organic compounds is a well-established synthetic method, as shown in the first two sections in this chapter. However, nitrene C-H insertion, the corresponding reaction of carbene analog, is much less known. In the past decade, considerable advances have been made in the development of this chemistry into a generally useful C-H amination process by using improved catalysts and protocols, in which readily available amines or amides are used as the starting substrates. Moreover,... 

---