Olefinic halides reduction

The efifect of electrocatalyst and operating conditions on selectivity were examined recently for the reduction of olefinic halides to saturated halides or cleavage products (hydrogenation versus hydrogenolysis) 31. These two steps proceed in parallel at different rates on various electrocatalysts. Thus, the ability for double bond reduction decreases in the order Pd Ru > Ag > Pt, although the overall rate is about the same on Pd and Pt (cf. Table VI). Figure 24 shows the extensive variation of reaction specificity with cathode potential as well as the smaller effect of electrolyte concentration. Similar behavior is exhibited by other halides and electrodes 31. ... 

Electrochemical reduction of organic halides has attracted considerable attention. Conventional electroreduction on mercury results only in cleavage of the carbon-halogen bond without reduction of unsaturates (52). However, Cd, Zn, Sn, and Cu form also ethane from olefinic halides 370). An EEC mechanism has been proposed for these reductions [i.e., two electrochemical steps (E) and a chemical (C) step, consecutively] involving a direct electron transfer to the halide and formation of a carbanion 32) ... 

Reaction of nonstabilized carbanions with [Fp(olefin)] complexes generally results in either displacement of the olefin or reduction of the metal rather than formation of stable (j -alkyliron complexes. This is especially true with simple, nonstabilized organo-magnesium halide or lithio reagents. However, allylmagnesium chloride and phenylmag-nesium chloride react in modest (20-40%) yield with the ethylene, propene and butadiene (1,4 addition) iron complexes. Lithium dimethylcuprate is even more efficient, reacting in up to 70% yield with Fp complexes of styrene, butadiene (1,4 addition) isoprene (1,4 addition) and allene. Complexes of cyclopentene and allene react in low... 

All lation. Thiophenes can be alkylated in the 2-position using alkyl halides, alcohols, and olefins. Choice of catalyst is important the weaker Friedel-Crafts catalysts, eg, ZnCl2 and SnCl, are preferred. It is often preferable to use the more readily accompHshed acylation reactions of thiophene to give the required alkyl derivatives on reduction. Alternatively, metalation or Grignard reactions, on halothiophenes or halomethylthiophenes, can be utilized. 

Some instances of incomplete debromination of 5,6-dibromo compounds may be due to the presence of 5j5,6a-isomer of wrong stereochemistry for anti-coplanar elimination. The higher temperature afforded by replacing acetone with refluxing cyclohexanone has proved advantageous in some cases. There is evidence that both the zinc and lithium aluminum hydride reductions of vicinal dihalides also proceed faster with diaxial isomers (ref. 266, cf. ref. 215, p. 136, ref. 265). The chromous reduction of vicinal dihalides appears to involve free radical intermediates produced by one electron transfer, and is not stereospecific but favors tra 5-elimination in the case of vic-di-bromides. Chromous ion complexed with ethylene diamine is more reactive than the uncomplexed ion in reduction of -substituted halides and epoxides to olefins. ... 

The three steps 32-34 have been suggested77 to be equilibria, and the overall equilibrium must lie far to the left because no adduct 23 is found in the reaction mixture when the reaction of sulfonyl chloride with olefin is carried out in the absence of a tertiary amine. A second possible mechanism involving oxidative addition of the arenesulfonyl halide to form a ruthenium(IV) complex and subsequent reductive elimination of the ruthenium complex hydrochloride, [HRulvCl], was considered to be much less likely. 

The general catalytic cycle for the coupling of aryl-alkenyl halides with alkenes is shown in Fig. 9.6. The first step in this catalytic cycle is the oxidative addition of aryl-alkenyl halides to Pd(0). The activity of the aryl-alkenyl halides still follows the order RI > ROTf > RBr > RC1. The olefin coordinates to the Pd(II) species. The coordinated olefin inserts into Pd—R bond in a syn fashion, p-Hydrogen elimination can occur only after an internal rotation around the former double bond, as it requires at least one /I-hydrogen to be oriented syn perpendicular with respect to the halopalladium residue. The subsequent syn elimination yields an alkene and a hydridopalladium halide. This process is, however, reversible, and therefore, the thermodynamically more stable (E)-alkene is generally obtained. Reductive elimination of HX from the hydridopalladium halide in the presence of a base regenerates the catalytically active Pd(0), which can reenter the catalytic cycle. The oxidative addition has frequently assumed to be the rate-determining step. 

The Mizoroki-Heck reaction is a metal catalysed transformation that involves the reaction of a non-functionalised olefin with an aryl or alkenyl group to yield a more substituted aUcene [11,12]. The reaction mechanism is described as a sequence of oxidative addition of the catalytic active species to an aryl halide, coordination of the alkene and migratory insertion, P-hydride elimination, and final reductive elimination of the hydride, facilitated by a base, to regenerate the active species and complete the catalytic cycle (Scheme 6.5). 

Catalyst systems of the type [NiL X + AlEt Xj (where L = PR and X = halide) afford highly active catalysts for olefm dimerisation. However, when complex 11 (Scheme 13.8) is treated with AlEt Cl in the presence of 1-butene, in toluene at 20°C the only products observed were decomposition products, 12,13,14 no butene dimers were obtained [22], At low temperatures (-15°C) and using the complex with 1,3-diiso-propylimidazolin-2-ylidene as the NHC ligand, small amounts of butene dimers were observed. It is apparent from these results that Ni-NHC complexes are capable of olefin dimerisation, however, decomposition of the catalyst via reductive elimination predominates. 

The electrophilic character of sulfur dioxide does not only enable addition to reactive nucleophiles, but also to electrons forming sulfur dioxide radical anions which possess the requirements of a captodative" stabilization (equation 83). This electron transfer occurs electrochemically or chemically under Leuckart-Wallach conditions (formic acid/tertiary amine - , by reduction of sulfur dioxide with l-benzyl-1,4-dihydronicotinamide or with Rongalite The radical anion behaves as an efficient nucleophile and affords the generation of sulfones with alkyl halides " and Michael-acceptor olefins (equations 84 and 85). 

Considerable progress has been made on C02 fixation in photochemical reduction. The use of Re complexes as photosensitizers gave the best results the reduction product was CO or HCOOH. The catalysts developed in this field are applicable to both the electrochemical and photoelectrochemical reduction of C02. Basic concepts developed in the gas phase reduction of C02 with H2 can also be used. Furthermore, electrochemical carboxyla-tion of organic molecules such as olefins, aromatic hydrocarbons, and alkyl halides in the presence of C02 is also an attractive research subject. Photoinduced and thermal insertion of C02 using organometallic complexes has also been extensively examined in recent years. 

In addition to /3-H elimination, olefin insertion, and protonolysis, the cr-metal intermediate has also proved to be capable of undergoing a reductive elimination to bring about an alkylative alkoxylation. Under Pd catalysis, the reaction of 4-alkenols with aryl halides affords aryl-substituted THF rings instead of the aryl ethers that would be produced by a simple cross-coupling mechanism (Equation (126)).452 It has been suggested that G-O bond formation occurs in this case by yy/z-insertion of a coordinated alcohol rather than anti-attack onto a 7r-alkene complex.453... 

In contrast to the direct reduction as described above, the indirect electrochemical reduction of perfluoroalkyl halides is a versatile and novel method for generating perfluoroalkyl radicals selectively. Saveant et al. have demonstrated many successful examples. Using terephthalonitrile as a mediator, the indirect reduction of CF3Br in the presence of styrene leads to the dimer of the radical adduct obtained by the attack of CF on styrene. On the other hand, in the presence of butyl vinyl ether, the mediator reacts with the radical adduct obtained by the attack of CF3. on the olefin (Scheme 3.4) [14]. 

Catalytic processes based on the use of electrogenerated nickel(O) bipyridine complexes have been a prominent theme in the laboratories of Nedelec, Perichon, and Troupel some of the more recent work has involved the following (1) cross-coupling of aryl halides with ethyl chloroacetate [143], with activated olefins [144], and with activated alkyl halides [145], (2) coupling of organic halides with carbon monoxide to form ketones [146], (3) coupling of a-chloroketones with aryl halides to give O -arylated ketones [147], and (4) formation of ketones via reduction of a mixture of a benzyl or alkyl halide with a metal carbonyl [148]. 

Results of a chemical activation induced by ultrasound have been reported by Nakamura et al. in the initiation of radical chain reactions with tin radicals [59]. When an aerated solution of R3SnH and an olefin is sonicated at low temperatures (0 to 10 °C), hydroxystannation of the double bond occurs and not the conventional hydrostannation achieved under silent conditions (Scheme 3.10). This point evidences the differences between radical sonochemistry and the classical free radical chemistry. The result was interpreted on the basis of the generation of tin and peroxy radicals in the region of hot cavities, which then undergo synthetic reactions in the bulk liquid phase. These findings also enable the sonochemical synthesis of alkyl hydroperoxides by aerobic reductive oxygenation of alkyl halides [60], and the aerobic catalytic conversion of alkyl halides into alcohols by trialkyltin halides [61]. 

Chromium(II) sulfate is a versatile reagent for the mild reduction of a variety of bonds. Thus aqueous dimethylformamide solutions of this reagent at room temperature couple benzylic halides, reduce aliphatic monohalides to alkanes, convert vicinal dihalides to olefins, convert geminal halides to carben-oids, reduce acetylenes to /raw5-olefins, and reduce a,j3-unsatu-rated esters, acids, and nitriles to the corresponding saturated derivatives. These conditions also reduce aldehydes to alcohols. The reduction of diethyl fumarate described in this preparation illustrates the mildness of the reaction conditions for the reduction of acetylenes and o ,j8-unsaturated esters, acids, and nitriles. 

Vinylation or arylation of alkenes with the aid of a palladium catalysts is known as the Heck reaction. The reaction is thought to proceed through the oxidative addition of an organic halide, RX onto a zero-valent [PdL2] species followed by coordination of the olefin, migratory insertion of R, reductive elimination of the coupled product and dehydrohalogenation of the intermediate [HPdXL2] (Scheme 6.1). 

The reaction of thiyl radicals with silicon hydrides (Reaction 3.18) is the key step of the so called polarity-reversal catalysis in the radical-chain reduction of alkyl halides as well as in the hydrosilylation of olefins using silane-thiol couple (see Sections 4.5 and 5.1) [33]. The reaction is strongly endothermic and reversible (Reaction —3.18). 

---