Octane alkenes

Alkylation combines lower-molecular-weight saturated and unsaturated hydrocarbons (alkanes and alkenes) to produce high-octane gasoline and other hydrocarbon products. Conventional paraffin-olefin (alkane-alkene) alkylation is an acid-catalyzed reaction, such as combining isobutylene and isobutane to isooctane. 

Facile reaction of a carbon nucleophile with an olefinic bond of COD is the first example of carbon-carbon bond formation by means of Pd. COD forms a stable complex with PdCl2. When this complex 192 is treated with malonate or acetoacetate in ether under heterogeneous conditions at room temperature in the presence of Na2C03, a facile carbopalladation takes place to give the new complex 193, formed by the introduction of malonate to COD. The complex has TT-olefin and cr-Pd bonds. By the treatment of the new complex 193 with a base, the malonate carbanion attacks the cr-Pd—C bond, affording the bicy-clo[6.1,0]-nonane 194. The complex also reacts with another molecule of malonate which attacks the rr-olefin bond to give the bicyclo[3.3.0]octane 195 by a transannulation reaction[l2.191]. The formation of 194 involves the novel cyclopropanation reaction of alkenes by nucleophilic attack of two carbanions. 

PHOTOCYCLIZATION OF AN ENONE TO AN ALKENE 6-M THYLBICYCL0[4.2.0]0CTAN-2-0NE (Bicyc1o[4.2.0]octan-2-one, 6-methy1-)... 

It is important to note here that both of the 5-exo radical cyclizations (133—>132—>131, Scheme 27) must proceed in a cis fashion the transition state leading to a strained mms-fused bicy-clo[3.3.0]octane does not permit efficient overlap between the singly occupied molecular orbital (SOMO) of the radical and the lowest unoccupied molecular orbital (LUMO) of the alkene. The relative orientation of the two side chains in the monocyclic radical precursor 134 is thus very significant because it dictates the relationship between the two outer rings (i. e. syn or anti) in the tricyclic product. The cis-anti-cis ring fusion stereochemistry of hirsutene would arise naturally from a cyclization precursor with trans-disposed side chain appendages (see 134). 

Epoxides may be formed from alkenes during degradation by Pseudomonas oleovorans, although octan-l,2-epoxide is not further transformed, and degradation of oct-l-ene takes place by co-oxidation (May and Abbott 1973 Abbott and Hou 1973). The co-hydroxylase enzyme is able to carry out either hydroxylation or epoxidation (Ruettinger et al. 1977). 

The most widely exploited photochemical cycloadditions involve irradiation of dienes in which the two double bonds are fairly close and result in formation of polycyclic cage compounds. Some examples of alkene photocyclizations are given in Scheme 6.9. Entry 1 is a transannular cyclization. The preference for the observed product over tricyclo[4.2.0.02,5]octane does not seem to have been analyzed in detail. Entries 2, 3, and 4 involve photolysis in the presence of Cu03SCF3. Entries 5 and 6 are cases in which the double bonds are in close proximity and can cyclize to caged structures. 

Scheme 13.17 depicts a synthesis based on enantioselective reduction of bicyclo[2.2.2]octane-2,6-dione by Baker s yeast.21 This is an example of desym-metrization (see Part A, Topic 2.2). The unreduced carbonyl group was converted to an alkene by the Shapiro reaction. The alcohol was then reoxidized to a ketone. The enantiomerically pure intermediate was converted to the lactone by Baeyer-Villiger oxidation and an allylic rearrangement. The methyl group was introduced stereoselec-tively from the exo face of the bicyclic lactone by an enolate alkylation in Step C-l. 

Nenajdenko et al. described the first example of addition of a 1,2-dication to C-C mutiple bonds. The only S-S dication found to participate in this reaction was the highly strained dication 115 derived from 1,4-dithiane. The reaction with alkenes 119 proceeded under mild conditions and led to derivatives of dithioniabicyclo[2.2.2]octane 120 as shown in Equation (33) and Table 21 <1998JOC2168>. This reaction was sensitive to steric factors and proceeded only with mono and 1,2-disubstituted ethylenes. Only alkenes conjugated with aromatic or cyclopropane moieties underwent this reaction. For the 1,2-disubstituted alkenes used in this study, the relative configuration of substitutents at the double bond was preserved and only one diastereomer was formed (see entries 2 and 3). 

The electrochemistry of cobalt-salen complexes in the presence of alkyl halides has been studied thoroughly.252,263-266 The reaction mechanism is similar to that for the nickel complexes, with the intermediate formation of an alkylcobalt(III) complex. Co -salen reacts with 1,8-diiodo-octane to afford an alkyl-bridged bis[Co" (salen)] complex.267 Electrosynthetic applications of the cobalt-salen catalyst are homo- and heterocoupling reactions with mixtures of alkylchlorides and bromides,268 conversion of benzal chloride to stilbene with the intermediate formation of l,2-dichloro-l,2-diphenylethane,269 reductive coupling of bromoalkanes with an activated alkenes,270 or carboxylation of benzylic and allylic chlorides by C02.271,272 Efficient electroreduc-tive dimerization of benzyl bromide to bibenzyl is catalyzed by the dicobalt complex (15).273 The proposed mechanism involves an intermediate bis[alkylcobalt(III)] complex. 

A detailed study of the role of the base in the formation of 2-isoxazolines by condensation of primary nitro compounds with alkenes in the presence of the tertiary diamine 1,4-diazabicyclo[2.2.2]octane (DABCO) was published <06EJO4852 06EJ03016>. 

The formation of alkenes and alkene-related polymerization products can seriously reduce the yields of desired alkane products from secondary alcohols, which can undergo elimination reactions. For example, reduction of 2-octanol at 0° with boron trifluoride gas in dichloromethane containing 1.2 equivalents of tri-ethylsilane gives only a 58% yield of n-octane after 75 minutes (Eq. II).129 The remainder of the hydrocarbon mass comprises nonvolatile polymeric material.126... 

Dioxabicyclo[3.2.1]octan-4-one, enone 1,2-reduction with acetal, 129-130 Disubstituted alkenes, alkene to alkane reductions, 36-38... 

Isoforming A process for increasing the octane rating of thermally cracked gasolines by catalytic isomerization over silica/alumina. Terminal alkenes are thus converted to nonterminal alkenes. Developed by Standard Oil Company of Indiana in the 1940s. 

It was concluded that the high selectivity observed in the hydrogenation experiments using 26 b is explained by the relatively strong coordination of the alkyne to the palladium center, which only allows for the presence of small amounts of alkene complexes. Only the latter are responsible for the observed minor amounts of ( )-alkene, which was shown to be a secondary reaction product formed by a subsequent palladium-catalyzed, hydrogen-assisted isomerization reaction. Since no n-octane was detected in the reaction mixture, only a tiny... 

Alkylation of isobutane with C3-C5 alkenes in the presence of strong acids leads to the formation of complex mixtures of branched alkanes, called alkylate, which are excellent blending components for gasoline. Alkylate has a high octane... 

Early investigations of zeolite REHX as a catalyst were done with ethene as the feed alkene (13). At 300 K, the product was mainly hexanes, whereas at temperatures as high as 422 K, isopentane dominated, with hexanes and octanes being the other main products. KTI developed a process which utilizes ethene... 

Because of its large reactor volume, the auto-refrigerated process can operate at very low alkene space velocities of about 0.1 h-1 LHSV (WHSV ca. 0.03 h 1). This design helps in increasing the octane number of the product and lowering acid consumption. The reaction temperature is maintained at about 278 K to minimize side reactions. Spent acid is withdrawn as 90-92 wt% acid. The isobutane concentration in the hydrocarbon phase is kept between 50 and 70 vol%. 

---