Occupational hazards, regulation

Recommended exposure limit (REL) is the name used by the US National Institute for Occupational Safety and Health (NIOSH) for the occupational exposure limits (OELs) it recommends to protect workers from hazardous substances and conditions in the workplace. RELs are not regulations. While they are intended primarily as recommendations to the US Occupational Safety and Health Administration (OSHA) and the Mine Safety and Health Administration (MSHA) for use in promulgating legal standards, they also may help employers, workers, and health professionals to recognize and control occupational hazards. Most RELs have been developed for chemical air contaminants, usually... 

FDA and NIOSH Public Health Notification Oxygen Regulator Fires Resulting from Incorrect Use of CGA870 Seals (June 19,2006) alerts healthcare professionals and the public about a potential occupational hazard associated with the improper use of oxygen regulator gaskets. 

Noise on construction sites is recognized by medical professionals and OSHA as an occupational hazard that can cause temporary or permanent hearing loss, stress, and other physical problems. The regulation is found in 29 CFR 1926.52. 

After evaluating the planned barriers as well as the influencing factors, then, the assessment of the occupational hazards within the defined susceptible hazards/risks exposed area need to be performed. The susceptible hazards/risks exposed area can be defined as per expert s judgement (opinions) and past experience. For example, a checklist analysis which is an experience based approach, can be used to identify known types of occupational hazards, potential accident situations, or design deficiencies (Neogy et al., 1996). Thereafter, the hazards needs to be classified as well as prioritise based on the standards, regulations and statutory requirements. 

Finnegan, Lisa. Will OSHA Regulate Incentive Programs Occupational Hazards. June 1998, pp. 63-64. 

For chemical faciUties in the United States, hazard analysis is not an option if inventories of hazardous chemicals are maintained in amounts greater than the threshold quantities specified by the Occupational Safety and Health Administration (OSHA) regulation 1910.119. Many faciUties are finding that hazard analysis has many benefits. The process or procedure often works better, the quaUty of the product is improved, the process experiences less down time, and the employees feel more comfortable in the work environment after a hazard analysis has been completed. 

Occupational Safety and Health J ct. OSHA regulations deal principally with physical aspects of safety and those things generally associated with accident prevention. These federal regulations deal especially with the need for estabHshed material safety data sheets and the proper labeling of printing inks under the Hazard Communication Laws. 

Code of Federal Regulations, Tide 29, part 1910.1200, OSHA Hazard Communication Standard, Occupational Safety and Health Administration, Washington, D.C. 

Process Safety Management of Highly Hazardous Chemicals Tide 29, Subtitie B, Chapt. XVII, Part 1910, Subpart H, Paragraph 119, of the Code ofFederal Regulations (29 CER 1910.119), FederalRegisterhl >()) 6403, U.S. Department of Labor, Occupational Safety and Health Administration (Feb. 24, 1992). 

The toxicology, occupational health hazards, and transportation regulations of cesium compounds result from the anion rather than the cesium cation. Producers and distributors provide an MSDS as well as detailed shipping requirements for each product. 

---