Nondestructive tests radiography

Caitz, L. Nondestructive Testing Radiography, Ultrasonics, Liquid Penetrant, Magnetic Particle. Eddy Current, ASM International, Materials Park. OH, 1995 Cornua, R.D. Problem-Solving Surface Analysis Techniques. Advanced Materials Processes, 16 (December 1992). 

The soundness of welds is checked by visual inspection and by nondestructive testing (radiography). 

Luminescence IP s are fundamentally and theoretically utilizable for nondestructive testing if all of the recommended guidelines and operational recipes and appropriate systems are used. They are quite capable of producing image quality on a par with industrial radiography. 

P. Mclntire, ed., "Radiography and Radiation Testing," Nondestructive Testing Handbook, Vol. 3, 2nd ed.. The American Society for Nondestmctive Testing, Columbus, Ohio, 1985. 

Corrosion-fatigue cracks can be detected by nondestructive testing techniques such as magnetic particle inspection, radiography, ultrasonics, and dye penetrant. Corrosion-fatigue cracks may occur in numerous tubes simultaneously. Nondestructive testing of tubes at locations similar to those in which cracks are observed can be useftil. 

Identification. If accessible, defects from burnthrough may be visually identified as fused holes in the tube wall. Various nondestructive testing techniques, such as radiography and ultrasonics, may also detect this defect. The defect generally causes leakage soon after affected equipment is placed in service. 

Occasionally, corrosion of this type produces large cavities covered by a thin outer skin of weld metal (Fig. 15.5). Even close examinations of such sites under a low-power microscope may fail to reveal the cavities. Compare Figs. 15.6 and 15.7. Generally, such sites are detected either by fluid leakage or by nondestructive testing techniques such as radiography and ultrasonics. 

Identification. Slag inclusions will not be visually identifiable unless slag particles emerge at the weldment surfaces. Radiography, eddy-current testing, and ultrasonics are nondestructive testing techniques that can disclose slag inclusions. 

Identification. Weld-root cracks originate at the root of the weld and run longitudinally along the weld, perpendicularly to the base-metal surface and parallel to the axis of the weld. In general, they may be identified visually or by various nondestructive testing techniques such as radiography or ultrasonics. Failures from weld-root cracking may occur soon after start-up or after extended periods of successful service. 

Gross cracks may be visually observable. Nondestructive testing for the presence of cracks includes using dye penetrant, ultrasonics, and radiography. Determination of the cracking mechanism will require metallographic analysis. 

Nondestructive testing (NDT) is used to assess a component or structure during its operational lifetime. Radiography, ultrasonics, eddy currents, acoustic emissions, and other methods are used to detect and monitor flaws that develop during operation (Chapter 7). 

By contrast, the metals have so far found only limited application save for one important use in the field of nondestructive testing. With the proliferation of research reactors over the past decade, neutron radiography has become a practical tool in the aerospace, nuclear and engineering industries, yet without the availability of gadolinium and dysprosium in the form of thin foils, the technique would be severely restricted. 

Nondestructive evaluation, also termed nondestructive testing or nondestructive inspection, is extensively used in weld testing (14). Nondestructive tests do no impair the serviceability of the material or component under stress. The most widely used tests for evaluation of welds are liquid penetrant, magnetic particle, ultrasonics, and radiography. Acoustic-emission tests are increasingly used. Nondestructive tests detect and characterize, in terms of size, shape, and location, the various types of weld discontinuities that can occur. 

Corrosion detection plays an important role in any corrosion control program. Most of the methods employ nondestructive test methods and include hydrogen evaluation, radiography, dynamic pressure, corrosion probes, strain gauges and eddy current measurements. Of these, the methods employed in cooling tower practice are hydrogen evaluation and corrosion probes. 

Green RE (1977) Flash radiography symp. proc. American Society for Nondestructive Testing, Columbus, Ohio 43221... 

Radiography is the most frequently used nondestructive test method. X rays and gamma rays passing through a structure are absorbed distinctively by flaws or inconsistencies in the material, so that cracks, voids, porosity, dimensional changes, and inclusions can be viewed on the resulting radiograph. 

---