Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Nitroalkanes, reactions

Equation 26. Electron-deficient flavins will also oxidize nitroalkane anions in model reactions (12). The observation (11) that nitromethane anion and FloXEt yield a stable 4a-adduct is evidence that 4a-adducts are not on the reaction path for nitroalkane oxidation. That the blocking of the N(5)-position of flavin (i.e., FloxEt) prevents oxidation of nitromethane would, however, be in accord with the requirement for an N(5)-adduct (11). The nitroalkane reaction with flavoenzyme has been used to implicate N(5)-adducts as intermediates in the oxidation mechanism of amino acid oxidases. However, it must be understood that nitroalkane anions differ significantly from the carbanions generated from a normal substrate. The nitroalkane anion on loss of its pair of electrons would provide an impossibly unstable carbonium ion, whereas in the case of the amino acid anion an internal electron release obviates carbonium ion formation. [Pg.105]

These malonate and nitroalkane reactions gave the adducts with the predicted absolute configurations (i )-adducts were obtained from cyclic (Z)-enones and (S)-adducts from acyclic ( )-enones when (S)-21 was employed. The stereochemical outcome can be summarized as M(a)-attack. The involvement of the a-enantioface-discriminating mechanism suggests that the chiral catalysts are located in the vicinity of the enone carbonyl group at the transition state. The reaction of the primary nitroalkane mentioned above also supports this explanation. [Pg.1064]

Friedel-Crafts reaction catalysts like anhydrous aluminum chloride are readily soluble in the nitroalkanes. Solutions containing up to 50% aluminum chloride are easily prepared in nitroalkane solvents. These catalytically active complexes, AICI3-RNO2, can be isolated and used in solvents other than the nitroalkane. The reactants in the Friedel-Crafts reaction are often soluble in the nitroalkane reaction medium. Other catalysts like boron trifluoride (BF3), titanium tetrachloride (TiCl4), and stannic tetrachloride (SnCl4) are also soluble in the nitroalkane solvents. Reaction types which use nitroparaffins as solvents include alkylation of aromatics, acetylation of aromatics, halogenations, nitrations, and the reaction of olefins and hydrogen sulfide to yield mercaptans. [Pg.276]

While nitroparaffins are resistant to oxidation, they are easily reduced to the corresponding amine. Nitroalkanes can be added across an activated double bond structure in the presence of a basic catalyst [II]. The reader should check the references cited in [IG] for several review articles that detail the scope of the nitroalkane reactions also, Kass [12] outlined many of the nitroalkane reactions along with the literature references. [Pg.278]

Favoured chemical methods include reduction by iron and hydrochloric acid (with optional catalysis by ferric chloride ) or by lithium aluminium hydride . With the latter reagent, ring enlargement has been noted with some tertiary cyclic nitroalkanes (reaction 87) . Lithium aluminium hydride has also been extensively... [Pg.40]

The reaction of alkyl halides with silver nitrite (Victor Meyer reaction) is of value in the preparation of primary nitroalkanes. In the case of secondary nitroalkanes, reactions are slow and yields are low. The reaction is of little value for the preparation of tertiary nitroalkanes. [Pg.160]

The above are examples of the Claisen - Schmidt reaction. The formation of p-nitrostyrenes by reaction of nitroalkanes with aromatic aldehydes in the presence of aqueous alkali may be included under the Claisen- hmidt condensation ... [Pg.709]

The lower nitroalkanes (sometimes refered to as nitroparaffins) are easily reduced by a multitude of systems, but by far the easiest, and also the highest yielding, is the Iron/Hydrochloric acid system. The reaction is ... [Pg.273]

Many of these reactions are reversible, and for the stronger nucleophiles they usually proceed the fastest. Typical examples are the addition of ammonia, amines, phosphines, and bisulfite. Alkaline conditions permit the addition of mercaptans, sulfides, ketones, nitroalkanes, and alcohols to acrylamide. Good examples of alcohol reactions are those involving polymeric alcohols such as poly(vinyl alcohol), cellulose, and starch. The alkaline conditions employed with these reactions result in partial hydrolysis of the amide, yielding mixed carbamojdethyl and carboxyethyl products. [Pg.133]

Nitromethane is the most reactive nitroalkane that favors strong reaction to the tris adduct (see Nitroalcohols). [Pg.100]

Reaction of various pyridazine derivatives with nitromethane or nitroethane in DMSO affords the corresponding 5-methyl and 5-ethyl derivatives. The reaction proceeds as a nucleophilic attack of the nitroalkane at the position 5. In this way, 3,6-dichloro-4-cyano-pyridazine, 4-carboxy- and 4-ethoxycarbonyl-pyridazin-3(2//)-ones and 4-carboxy- and 4-ethoxycarbonyl-pyridazin-6(lH)-ones can be alkylated at position 5 (77CPB1856). [Pg.23]

Trialkylisoxazoles have been prepared by the condensation of primary nitroalkanes under the influence of basic reagents (40JA2604). They can also be obtained from the reaction of a 1,3-diketone RCOCHRCOR with hydroxylamine hydrochloride <62HC(17)l, p. 54). [Pg.83]

This reaction can also be applied to tertiary nitroalkanes lacking any additional functional group. The reactions with nitro compounds lacking additional anion-stabilizing groups are carried out in DMSO solution ... [Pg.729]

The simplest method for obtaining selective fluonnation is to conduct reactions under conditions that invigorate the electrophilicity of fluorine In practice this method entails the creation of anionic or strongly nucleophilic reactive centers on substrate molecules while suppressing or reducing the tendency toward radical attack Numerous examples of seleetive fluorine attack on carbanionic, amido and carboxylato species are documented Especially abundant is alpha fluonnation of nitroalkanes in polar solvents [42 43, 44, 45 46] (equations 10-14)... [Pg.109]

Hydroxylamine can be prepared by a variety of reactions involving the reduction of nitrites, nitric acid or NO, or by the acid hydrolysis of nitroalkanes. In the conventional Raschig synthesis, an aqueous solution of NH4NO2 is reduced with HS04 /S02 at 0° to give the hydroxylamido-A ,A -disulfate anion which is then hydrolysed stepwise to hydroxylammonium sulfate ... [Pg.431]

The Barton-Zard (BZ) pyrrole synthesis is similar both to the van Leusen pyrrole synthesis that uses Michael acceptors and TosMlC (Section 6.7) and the Montforts pyrrole synthesis using a,P-unsaturated sulfones and alkyl a-isocyanoacetates." An alternative to the use of the reactive nitroalkenes 1 is their in situ generation from P-acetoxy nitroalkanes, which are readily prepared via the Henry reaction between an aldehyde and a nitroalkane followed by acetylation. Examples are shown later. [Pg.70]

In 1985, in the course of their interest in nitroalkane chemistry, Barton and Zard reported the base-catalyzed reaction of nitroalkenes with a-isocyanoacetates leading to pyrrole esters having an ideal substitution pattern for the synthesis of porphyrins and bile... [Pg.70]

Nitronates derived from primary nitroalkanes can be regarded as a synthetic equivalent of nitrile oxides since the elimination of an alcohol molecule from nitronates adds one higher oxidation level leading to nitrile oxides. This direct / -elimination of nitronates is known to be facilitated in the presence of a Lewis acid or a base catalyst [66, 72, 73]. On the other hand, cycloaddition reactions of nitronates to alkene dipolarophiles produce N-alkoxy-substituted isoxazolidines as cycloadducts. Under acid-catalyzed conditions, these isoxazolidines can be transformed into 2-isoxazolines through a ready / -elimination, and 2-isoxazolines correspond to the cycloadducts of nitrile oxide cycloadditions to alkenes [74]. [Pg.272]

Thus, various kmds of bases are effective in inducing the Henry reaction The choice of base and solvent is not crucial to carry out the Henry reaction of simple nitroalkanes v/ith aldehydes, as summarized in Table 3 1 In general, sterically hindered carbonyl or nitro compounds are less reactive not to give the desired ni tro-aldol products in good yield In such cases, self-condensation of the carbonyl compound is a serious side-reaction Several mochfied procedures for the Henry reaction have been developed... [Pg.32]

The Henry reactions of A, ALdibenzyl-L-phenylalaninal with nitroalkanes using 1.2 equiv of tetrabutylammonium fluoride (TBAF) as the catalyst proceed in ahighly stereoselective manner, as shown in Eqs. 3.82 and 3.83. This reaction provides rapid and stereoselective access to important molecules containing 1,3-diamino-2-hydroxypropyl segments, which are cenhal structural subunit of the HIV protease inhibitor amprenavir (in Scheme 3.21). [Pg.63]

Oxidadve cross-conphng reactions of alkylated derivatives of activated CH compounds, such as malonic esters, acetylacetone, cyanoacetates, and ceitain ketones, v/ithnitroalkanes promoted by silver nitrate or iodine lead to the formation of the nitroalkylated products. This is an alternative way of performing Spj l reactions using cr.-halo-nitroalkanes. [Pg.138]

TheNef reaction of primary nitro compounds gives iildehydes or carboxylic acids, depending on the reaction conditions. Each transformation provides an important tool in organic synthesis. Primary nitro compotmds are converted into carboxylic acids vrith concentrated mineriil acids. Because such harsh conditions iilso lead to side reactions, a milder method is required inorganic synthesis. Basic phosphate-buffered KMnO rapidly converts primary nitroalkanes into carboxylic acids in 90-99% yield fEq. 6.13. "... [Pg.162]

The Henry reaction of ketones with nitroalkanes in the presence of etbylenediamine gives allylic nitro compounds, which give a,fi-imsanirated carbonyl compounds via the Nef reaction fEq. 6.30. ... [Pg.167]

Although the base-catalyzed addition of nitroalkanes to electron-deficient olefins has been extensively used in organic synthesis fsee Michael addition Chapter 4, it is only recently that the reaction has been extended to the cyclopropanadon reaction. In 1978, it was reported that the anion of nitromethane reacts with certain highly electron-deficient olefins to produce cycloptopanesingoodyieldrEq. 7.36. More recently, this reaction has been extended to more general cyclopropanadons, as shown in Eqs. 7.37 and 7.38, in which potassittm salts of nitroalkanes are employed in DMSO as alkylidene transfer reagents." ... [Pg.191]


See other pages where Nitroalkanes, reactions is mentioned: [Pg.624]    [Pg.16]    [Pg.624]    [Pg.16]    [Pg.27]    [Pg.1040]    [Pg.65]    [Pg.297]    [Pg.119]    [Pg.76]    [Pg.638]    [Pg.728]    [Pg.497]    [Pg.129]    [Pg.61]    [Pg.20]    [Pg.32]    [Pg.36]    [Pg.40]    [Pg.70]    [Pg.104]    [Pg.138]    [Pg.159]    [Pg.167]    [Pg.175]   
See also in sourсe #XX -- [ Pg.21 ]




SEARCH



1,2-addition reactions, nitroalkanes

1,4-Michael addition reactions nitroalkanes

4-nitroalkanal nitroalkane

Aldehydes reaction with nitroalkanes

Aza-Henry reaction of nitroalkane

Lithium diisopropylamide, reaction with nitroalkanes

Nef reaction nitroalkanes

Nitroalkane

Nitroalkanes

Nitroalkanes Henry reaction

Nitroalkanes Kaplan-Shechter reaction

Nitroalkanes Mannich reaction

Nitroalkanes Michael reactions

Nitroalkanes aldol-type reactions

Nitroalkanes reactions with

Nitroalkanes, nitroaldol reaction

Nitroalkanes, nitroaldol reaction reactions

Nitroalkanes, proton-transfer reactions

Proton Transfer Reactions of Simple and Aryl Nitroalkanes in Solution

Proton transfer reactions aryl nitroalkanes

Sodium hydrogen sulfide, reaction with nitroalkanes

© 2024 chempedia.info