Nitrites synthesis

Hooper AB, Terry KR (1979) Hydroxylamine oxidoreductase of Nitrosomonas. Production of nitric oxide from hydroxylamine. Biochim Biophys Acta 571 12-20 Hooper AB, Terry KR, Maxwell PC (1977) Hydroxylamine oxidoreductase of Nitrosomonas. Oxidation of diethyldithiocarbamate concomitant with stimulation of nitrite synthesis. Biochim Biophys Acta 462 141-152... 

Functionalization of lOP- and 13P-Me of steroids from the lOP-ol nitrite synthesis of aldosterone acetate (Schemes 13 and 14)... 

Functionalization of 13a-Me from steroidal 20a-ol nitrite synthesis of deoxofukujusonorone (Scheme 16)... 

Nitroethane and 1-(3,4 methylenedioxy) 2- nitropropane This method of producing the above mentioned nitro compounds is by far the best Ritter has come across yet The problem with standard nitroethane synthesis is that the -NO2 source most commonly used is silver nitrite (a la Merck Index citing). Needless to say, this is going to be an expensive compound to make as it is not available commercially but must be synthesized from costly silver nitrate. The other methods mentioned in Vogels 5th masterpiece... 

A photochemical partial synthesis of aldosterone (19) made the hormone available on an industrial scale for the first time (114). Corticosterone acetate (51 acetate) is treated with nitrosyl chloride in pyridine at 20°C to yield the 11-nitrite (115). Irradiation of (115) leads to rearrangement with formation of the C g-oxime (116). Removal of the oxime residue with nitrous acid furnishes aldosterone (19) in excellent yield. 

Synthesis. The classic laboratory synthesis of /V-nitrosamines is the reaction of a secondary amine with acidic nitrite [14797-65-0] at ca pH 3. The primary nitrosating intermediate is N2O2 arising from nitrous acid [7782-77-6] (48). 

Another synthesis of pyrogaHol is hydrolysis of cyclohexane-l,2,3-trione-l,3-dioxime derived from cyclohexanone and sodium nitrite (16). The dehydrogenation of cyclohexane-1,2,3-triol over platinum-group metal catalysts has been reported (17) (see Platinum-GROUP metals). Other catalysts, such as nickel, rhenium, and silver, have also been claimed for this reaction (18). 

Solvent for Displacement Reactions. As the most polar of the common aprotic solvents, DMSO is a favored solvent for displacement reactions because of its high dielectric constant and because anions are less solvated in it (87). Rates for these reactions are sometimes a thousand times faster in DMSO than in alcohols. Suitable nucleophiles include acetyUde ion, alkoxide ion, hydroxide ion, azide ion, carbanions, carboxylate ions, cyanide ion, hahde ions, mercaptide ions, phenoxide ions, nitrite ions, and thiocyanate ions (31). Rates of displacement by amides or amines are also greater in DMSO than in alcohol or aqueous solutions. Dimethyl sulfoxide is used as the reaction solvent in the manufacture of high performance, polyaryl ether polymers by reaction of bis(4,4 -chlorophenyl) sulfone with the disodium salts of dihydroxyphenols, eg, bisphenol A or 4,4 -sulfonylbisphenol (88). These and related reactions are made more economical by efficient recycling of DMSO (89). Nucleophilic displacement of activated aromatic nitro groups with aryloxy anion in DMSO is a versatile and useful reaction for the synthesis of aromatic ethers and polyethers (90). 

Biochemical Functions. Ascorbic acid has various biochemical functions, involving, for example, coUagen synthesis, immune function, dmg metabohsm, folate metaboHsm, cholesterol cataboHsm, iron metaboHsm, and carnitine biosynthesis. Clear-cut evidence for its biochemical role is available only with respect to coUagen biosynthesis (hydroxylation of prolin and lysine). In addition, ascorbic acid can act as a reducing agent and as an effective antioxidant. Ascorbic acid also interferes with nitrosamine formation by reacting direcdy with nitrites, and consequently may potentially reduce cancer risk. 

Later, a completely different and more convenient synthesis of riboflavin and analogues was developed (34). It consists of the nitrosative cyclization of 6-(A/-D-ribityl-3,4-xyhdino)uracil (18), obtained from the condensation of A/-D-ribityl-3,4-xyhdine (11) and 6-chlorouracil (19), with excess sodium nitrite in acetic acid, or the cyclization of (18) with potassium nitrate in acetic in the presence of sulfuric acid, to give riboflavin-5-oxide (20) in high yield. Reduction with sodium dithionite gives (1). In another synthesis, 5-nitro-6-(A/-D-ribityl-3,4-xyhdino) uracil (21), prepared in situ from the condensation of 6-chloro-5-nitrouracil (22) with A/-D-ribityl-3,4-xyhdine (11), was hydrogenated over palladium on charcoal in acetic acid. The filtrate included 5-amino-6-(A/-D-ribityl-3,4-xyhdino)uracil (23) and was maintained at room temperature to precipitate (1) by autoxidation (35). These two pathways are suitable for the preparation of riboflavin analogues possessing several substituents (Fig. 4). 

Synthesis. Almost without exception, azo dyes ate made by diazotization of a primary aromatic amine followed by coupling of the resultant diazonium salt with an electron-rich nucleophile. The diazotization reaction is carried out by treating the primary aromatic amine with nitrous acid, normally generated in situ with hydrochloric acid and sodium nitrite. The nitrous acid nitrosates the amine to generate the N-nitroso compound, which tautomerizes to the diazo hydroxide. 

Equations 4-8 illustrate some mild methods that can be used to cleave amides. Equations 4 and 5 indicate the conditions that were used by Woodward and Eschenmoser, respectively, in their synthesis of vitamin B,2- Butyl nitrite," nitrosyl chloride, and nitrosoniurn tetrafluoroborate... 

Hydrogenation reduces the nitro group to amino which is then diazotized using sodium nitrite and tetrafluoroboric acid. The diazotized crown was not isolated but the aq. solution was treated directly with sodium acetate and bis(dibenzylideneacetone)-pal-ladium(O) in acetonitrile solution. Ethylene was then introduced to the autoclave and the solution was allowed to stir for 2 days. 4 -Vinylbenzo-15-crown-5 was isolated (30% from 4 -nitrobenzo-15-crown-5) as a colorless solid (mp 43.5—44.2°) °. The synthesis is illustrated in Eq. (3.16). 

The initial observation that menthone reacts with amyl nitrite in the presence of base to give a good yield of an open-chain oximino ester was not expanded for synthetic purposes until Woodward almost forty years later utilized this reaction for the cleavage of a 7-keto-decahydroisoquinoline in the course of his total synthesis of quinine. 

Table 3. Synthesis of ort/io-Substituted Fluoroaromatics from Nitrite Esters, Boron Trifluoride, and Hydrogen Fluoride [26]...

Equations 1-10 illustrate some mild methods that can be used to cleave amides. Equations 1 and 2 indicate the conditions that were used by Woodward and Eschenmoser, respectively, in their synthesis of vitamin B12. Butyl nitrite, nitrosyl chloride, and nitrosonium tetrafluoroborate (NO BF4 ) have also been used to cleave amides. Since only tertiary amides are cleaved by potassium -butoxide (eq. 3), this method can be used to effect selective cleavage of tertiary amides in the presence of primary or secondary amides.(Esters, however, are cleaved by similar conditions.) Photolytic cleavage of nitro amides (eq. 4) is discussed in a review. 

Hydroxylamine can be prepared by a variety of reactions involving the reduction of nitrites, nitric acid or NO, or by the acid hydrolysis of nitroalkanes. In the conventional Raschig synthesis, an aqueous solution of NH4NO2 is reduced with HS04 /S02 at 0° to give the hydroxylamido-A ,A -disulfate anion which is then hydrolysed stepwise to hydroxylammonium sulfate ... 

The immediate outcome of the Hantzsch synthesis is the dihydropyridine which requires a subsequent oxidation step to generate the pyridine core. Classically, this has been accomplished with nitric acid. Alternative reagents include oxygen, sodium nitrite, ferric nitrate/cupric nitrate, bromine/sodium acetate, chromium trioxide, sulfur, potassium permanganate, chloranil, DDQ, Pd/C and DBU. More recently, ceric ammonium nitrate (CAN) has been found to be an efficient reagent to carry out this transformation. When 100 was treated with 2 equivalents of CAN in aqueous acetone, the reaction to 101 was complete in 10 minutes at room temperature and in excellent yield. 

The required nitrite esters 1 can easily be obtained by reaction of an appropriate alcohol with nitrosyl chloride (NOCl). The 3-nitroso alcohols 2 formed by the Barton reaction are useful intermediates for further synthetic transformations, and might for example be converted into carbonyl compounds or amines. The most important application for the Barton reaction is its use for the transformation of a non-activated C-H group into a functional group. This has for example been applied for the functionalisation of the non-activated methyl groups C-18 and C-19 in the synthesis of certain steroids. ... 

Tiazofurine (142) is an antimetabolite with antineoplastic activity. It preferentially affects leukemic lymphocytes over normal cells due to selective activation by formation of its adenine dinucleotide by transformed cells. Of the syntheses available, one starts by conversion of iniidate 138 to methyl 2,5-anhydroallonothioate (139). Next, condensation with ethyl 2-amino-2-cyanoac-etate leads to the thioamide which undergoes thiol addition to the nitrile function to produce the amminothiazolecarboxyester system of 140 directly. Sodium nitrite in aqueous hypophosphorus acid eliminates the superfluous amino group via the diazonium transformation to give 141. This synthesis of tiazofurine (142) concludes by ester amide exchange in methanolic ammonia [48]. 

A. number of rutro compounds used m ndturdl product synthesis have been prepared by the n of alkyl halides Some recent examples are summarized m Table 2 4 fi-Nitro carbonyl compounds are important for synthesis of natural products The reaction of alkyl vinyl ketones with sodium nitrite and acetic acid in THF gives thecorrespondmgfi-nitro carbonyl compounds in42-82% ""rhis method is better for the preparation of fi-nitro carbonyl compounds than the nitration of the corresponclmg halides... 

The most versatile route involves the synthesis of the MeCN complex the weakly bound nitrite is readily replaced by a variety of anions. These generally react in a similar way to the chloride, IR data for these and their dioxygen adducts are given in Table 2.9 [129]. 

---