Nickel peroxide esters

When heated in the presence of a carboxyHc acid, cinnamyl alcohol is converted to the corresponding ester. Oxidation to cinnamaldehyde is readily accompHshed under Oppenauer conditions with furfural as a hydrogen acceptor in the presence of aluminum isopropoxide (44). Cinnamic acid is produced directly with strong oxidants such as chromic acid and nickel peroxide. The use of t-butyl hydroperoxide with vanadium pentoxide catalysis offers a selective method for epoxidation of the olefinic double bond of cinnamyl alcohol (45). 

A multiwavelength approach might have been considered as an alternative to chemical derivatisation. Ruddle and Wilson [62] reported UV characterisation of PE extracts of three antioxidants (Topanol OC, Ionox 330 and Binox M), all with identical UV spectra and 7max = 277 nm, after reaction with nickel peroxide in alkaline ethanolic solutions, to induce marked differentiation in different solvents and allow positive identification. Nonionic surfactants of the type R0(CH2CH20) H were determined by UV spectrophotometry after derivatisation with tetrabromophenolphthalein ethyl ester potassium salt [34]. Magill and Becker [63] have described a rapid and sensitive spectrophotometric method to quantitate the peroxides present in the surfactants sorbitan monooleate and monostearate. The method, which relies on the peroxide conversion of iodide to iodine, works also for Polysorbate 60 and other surfactants and is more accurate than a titrimetric assay. 

The ring synthesis of the tetrahydro-1,3-azoles is simply the formation of N,N-, N,0-or A, S-analogues of aldehyde cyclic acetals the ring synthesis of the 4,5-dihydro-heterocycles requires an acid oxidation level in place of aldehyde. A good route to the aromatic systems is therefore the dehydrogenation of these reduced and partially reduced systems. Nickel peroxide, " manganese(IV) oxide, copper(II) bromide/ base, and bromotrichloromethane/diazabicycloundecane have been used. The example shown uses cysteine methyl ester with a chiral aldehyde to form the tetrahydrothiazole. 

Methylsuccinic acid has been prepared by the pyrolysis of tartaric acid from 1,2-dibromopropane or allyl halides by the action of potassium cyanide followed by hydrolysis by reduction of itaconic, citraconic, and mesaconic acids by hydrolysis of ketovalerolactonecarboxylic acid by decarboxylation of 1,1,2-propane tricarboxylic acid by oxidation of /3-methylcyclo-hexanone by fusion of gamboge with alkali by hydrog. nation and condensation of sodium lactate over nickel oxide from acetoacetic ester by successive alkylation with a methyl halide and a monohaloacetic ester by hydrolysis of oi-methyl-o -oxalosuccinic ester or a-methyl-a -acetosuccinic ester by action of hot, concentrated potassium hydroxide upon methyl-succinaldehyde dioxime from the ammonium salt of a-methyl-butyric acid by oxidation with. hydrogen peroxide from /9-methyllevulinic acid by oxidation with dilute nitric acid or hypobromite from /J-methyladipic acid and from the decomposition products of glyceric acid and pyruvic acid. The method described above is a modification of that of Higginbotham and Lapworth. ... 

---