NFPA National Fire Protection maintenance

NFPA 70B Recommended Practice for Electrical Equipment Maintenance. National Fire Protection Association, Quincy, MA. 

NFPA 70B (2006) Recommended practice for electrical equipment maintenance. (National Fire Protection Association). 

National Fire Protection Association, Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversion, Maintenance, and Operation, NFPA 505, Quincy, MA, 1996... 

A National Fire Protection Association (NFPA) standard that addresses electrical safety issues including work practices, maintenance, special equipment requirements, installation and demolition of electrical conductors, electrical equipment, signaling and communications conductors and equipment, and raceways. 

A National Fire Protection Association (NFPA) fire code that provides the minimum requirements, based on NFPA 101, Life Safety Code, with due regard to function for various types of merchant vessels, for the design, operation, and maintenance of merchant vessels for safety to life from fire and similar emergencies. 

Institute (ANSI) and the National Fire Protection Association (NFPA). For example, ANSI Standard B56.1-1969, Standard for Powered Industrial Trucks, covers the safety requirements relating to the elements of design, operation, and maintenance of powered industrial trucks. 

National Fire Protection Association. (2010). NFPA 25 Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems (2011 ed.). National Fire Protection Association, Quincy, MA. 

National Fire Protection Association (NFPA). NFPA 25, inspection, testing and maintenance of water-based fire protection systems. Quincy, MA NFPA 2011. 

OSHA now considers the National Electrical Code (NEC) or National Fire Protection Association (NFPA)/ANSI 70 as a national consensus standard. Article 517 of NFPA 70 contains special electrical requirements for healthcare facilities. Refer to 29 CFR 1926.401-449 for OSHA construction-related electrical requirements. In addition, state and local regulations may apply. Electricians and maintenance personnel must understand OSHA electrical safety standards published in 29 CER 1910.301-399. NEPA/ANSI 70 applies to every replacement, installation, or utilization of electrical equipment. Supervisors must inspect work areas for possible electrical hazards. Electrical current travels through electrical conductors its pressure is measured in volts. Resistance to the flow of electricity is measured using ohms, which can vary widely. Resistance determination considers the nature of the substance itself, the length and area of the substance, and the temperature of the substance. Some materials, like metal, offer very little resistance and become conductors very easily. Other substances, such as porcelain and dry wood, offer high... 

These codes are concerned with safety regulations that relate to fire protection equipment, maintenance of building and premises, hazardous materials, processes, and machinery used in buildings. They are normally issued by authorities like Building Officials and Code Administration International, Inc. (BOCA) or the National Fire Protection Association (NFPA). It is important to check with the state fire marshal or other authorities to know which codes are applicable to your area. 

Chapter Five addresses fire safety in warehouse operations, including information on some very serious warehouse fire losses. The reports from the National Fire Protection Association (NFPA) point out that each of the fires was preventable. One fire, in particular, resulted in a 280 million loss. Paying attention to housekeeping practices, maintenance of fire systems, and safe storing and handling of product will lower the risk associated with fires. Trained engineers can offer guidance on complete fire safety. 

---