Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

NFPA diamond

Standard for gauging flammability. The most common systems for designating flammability are the Department of Transportation (DOT) definitions, the National Fire Protection Association s (NFPA) system, and the Environmental Protection Agency s (EPA) Resource Conservation and Recovery Act s (RCRA) definition of ignitable wastes, all of which use flashpoint in their schemes. The NFPA diamond, which comprises the backbone of the NFPA Hazard Signal System, uses a four-quadrant diamond to display the... [Pg.171]

Class lA liquids with flashpoints below 73°F and boiling points below 100°F. An example of a Class lA flammable liquid is n-pentane (NFPA Diamond 4). [Pg.171]

Class IB liquids with flashpoints below 73°F and boiling points at or above 100°F. Examples of Class IB flammable liquids are benzene, gasoline, and acetone (NFPA Diamond 3). [Pg.171]

Class IC liquids with flashpoints at or above 73°F and below 100°F. Examples of Class IC flammable liquids are turpentine and n-butyl acetate (NFPA Diamond 3). [Pg.171]

Class II liquids with flashpoints at or above 100°F but below 140°F. Examples of Class II flammable liquids are kerosene and camphor oil (NFPA Diamond 2). [Pg.171]

Pyrophoric and other spontaneously combustible substances will generally be identified as such on their product literature, MSDSs or International Chemical Safety Cards (described in Section 4.2). These substances should be identified as DOT/UN Hazard Class 4.2 materials for shipping purposes and labeled as SPONTANEOUSLY COMBUSTIBLE. For pyrophoric substances, if the NFPA diamond (NFPA 704... [Pg.53]

When the NFPA diamond is used for container or vessel labeling, and the white (bottom) quadrant contains the W symbol, the material will react violently or explosively with water, and a chemical reactivity hazard obviously exists. However, if the W symbol is not present, the material may still be water reactive, but at a slower rate, since the pur-pose of the NFPA symbol is to alert emergency responders to significant, immediate water reactivity n. hazards. Water reactivity is often very rapid, but can j also be slow. The reaction may generate sufficient gas Twy to rupture a closed container or vessel. The reaction of f an organic material with water may be delayed due to reaction only occurring at the interface. [Pg.59]

When the NFPA diamond is used for container or vessel labeling, and the white (bottom) quadrant contains OX, the material possesses oxidizing properties. It may be either an oxidizer or an organic peroxide. In either case, it should be considered to pose a chemical reactivity hazard. [Pg.62]

The diamond label in Figure 1.13, called the National Fire Protection Agency (NFPA) diamond provides information at a glance and should be mounted on all containers. Each of the smaller diamonds within the larger one has a different color. The top diamond is red and gives flammability information. The left diamond is blue and tells to what extent the material is a health hazard. The right diamond is yellow and provides reactivity information. The bottom diamond is white and gives special information about the material. The numbers 1, 2, 3, and 4 are placed in the top three smaller diamonds to indicate the severity of the hazard, 1 the least hazardous and 4 the most hazardous. [Pg.9]

The NFPA diamond provides safety information at a glance. [Pg.9]

When choosing a site for an operation or the storage of materials, consideration must be given to toxicity, flammability, or other hazardous properties of the material being handled. The information provided by the NFPA diamond is helpful for this. [Pg.10]

Make sure that you have access to the MSDS, the chemical is labeled as required by your facility, and the container is entered into your facility s hazardous chemical management program. Study the chemical s MSDS and label. Look for information about the chemical s reactivity, stability and hazards. If there is a National Fire Protection Association (NFPA) diamond or a Hazard Material Information System (HMIS) label, look for a 2, 3, or 4 in the yellow Instability (formerly Reactivity) section or a W (water reactive) in the white Special Hazards section. [Pg.66]

The Chemical Data Summary Sheet (CDSS) is a part of a larger INEEL Chemical Management System (ICMS) — a computerized tracking system for chemical products, chemicals, or hazardous agents (CPCHA). INEEL developed the CDSS as a tool to aid in hazard identification. Chemical safety experts evaluated every CPCHA at INEEL and developed a CDSS for each. Information on the CDSS includes the National Fire Protection Association (NFPA) diamond a listing of all hazards and a compatibility classification, time-sensitive classification, and building code classification for the identified CPCHA. While the CDSS is not a replacement for an MSDS, it does contain site-specific safety information that cannot be found in an MSDS and that information is presented in a standardized format... [Pg.91]

Sometimes in the iower part of the NFPA diamond the word OXY appears. This indicates that the substance is a strong oxidant. [Pg.965]

Figure 2.6 NFPA Diamond s bol with arbitrary ratings in the individual diamonds. Figure 2.6 NFPA Diamond s bol with arbitrary ratings in the individual diamonds.
A simple identification system used to communicate to workers the hazards of materials. HMIS is somewhat similar to the National Fire Protection Association (NFPA) 704 Hazardous Material placard, which is used for emergency response incidents. Instead of the NFPA diamond shape, which many feared would be confused with the placarding system, the HMIS uses a four-color bar system. The top bar indicates the level of health hazard. The second bar from the top is red for Flammability the third bar from the top is yellow for Reactivity, which is used in the second edition, while Physical Hazard is used in the third edition of the guidance and white at the... [Pg.149]

The most well-known hazard rating system is by the National Fire Protection Association (NFPA) and is called the NFPA diamond. It is a multicolored diamond that covers three hazard classes as well as specidc other hazards, and is shown is Figure 3.1.2.3. This diamond is actually designed for dredghters and it represents the hazard under conditions of a fire—it is not specidcally designed for laboratory safety. (See Special Topic 3.1.2.2 How Is a Chemical Different in a Fire ) The diamond is subdivided into four smaller diamonds—each with its characteristic color. If each point of the large diamond is treated like a clock, you will And at 9 o clock a blue diamond for health hazards, at 12 o clock a red diamond for dammability, at 3 o clock a yellow diamond for instability, and at 6 o clock a... [Pg.127]

FIGURE 3.1.2.3 NFPA Diamond. The fire diamond is frequently used in chemical laboratories. The ratings indicate the hazard level under fire conditions, not necessarily ambient laboratory conditions. (The NFPA diamond is reprinted with permission from NFPA 704-2007, System for the Identification of the Hazards of Materials for Emergency Response. Copyright 2007 National Fire Protection Association, Quincy, MA. This reprinted material is not the complete and official position of the NFPA on the referenced subject, which is represented only by the standard in its entirety. The NFPA classifies a limited number of chemicals and cannot be responsible for the classification of any chemical whether the hazard of classifications are included in NFPA or developed by other individuals.)... [Pg.129]

The NFPA diamond was designed for firefighters to quickly assess the hazards of a chemical under the conditions of a fire since that is how they are most likely to encounter chemicals. This is different from the conditions in laboratories. The NFPA diamond considers issues such as ... [Pg.130]

Which statement is true with regard to the NFPA diamond ... [Pg.131]

On US labels, you may find the US National Fire Protection Association (NFPA) diamond-shaped label, with four divisions which give a concise warning of the hazards associated with a particular material. Clockwise from the top they are flamma-bihty reactivity special and health. The figures indicate degree of risk and range from 0 - insignificant to 4 - extreme. A star indicates a chronic health hazard. The US National Paint and Coating Association s HMIS is similar but contains a PPE code. [Pg.363]


See other pages where NFPA diamond is mentioned: [Pg.171]    [Pg.65]    [Pg.209]    [Pg.210]    [Pg.55]    [Pg.9]    [Pg.170]    [Pg.171]    [Pg.55]    [Pg.187]    [Pg.52]    [Pg.129]    [Pg.131]    [Pg.231]    [Pg.85]   
See also in sourсe #XX -- [ Pg.3 , Pg.3 , Pg.4 , Pg.4 , Pg.5 , Pg.5 , Pg.6 , Pg.6 , Pg.7 , Pg.7 , Pg.8 , Pg.8 , Pg.9 , Pg.9 , Pg.10 , Pg.10 , Pg.11 , Pg.11 , Pg.12 , Pg.12 , Pg.13 , Pg.14 , Pg.15 ]




SEARCH



NFPA

The NFPA Diamond

© 2024 chempedia.info